210-020問題集、VCE実際の試験問題

質問 1

You are deploying multiple Cisco UCS chassis and the UCS manager fails to discover a chassis.
What is the problem?

A. There are too many uplinks connected to the fabric interconnect(s).

B. The chassis discovery policy is set with more links than what is physically connected.

C. There is a power supply unplugged in one of the chassis causing a fault.

D. There are no blades in the chassis you are trying to discover.

正解: B

質問 2

You want to create a BIOS policy in accordance with VCE best practices.
What would you do to accomplish this task?

A. You create a BIOS policy only when using UIM/P.

B. You do not create a BIOS policy when using UIM/P or UCSM.

C. You create a BIOS policy only when using UCSM.

D. You create a BIOS policy when using UIM/P or UCSM.

正解: D

質問 3

Which statement is correct about WWPN pools?

A. WWPNs are tied to VLANs.

B. WWPNs are tied to UUIDs.

C. WWPNs are tied to vHBAs.

D. WWPN pools are tied to vNICs.

正解: C

解説: (PassTest メンバーにのみ表示されます)

質問 4

You are required to physically move a blade from one UCS chassis to another UCS chassis.
What must be selected in the service profile from the UCSM GUI prior to the physical server migration?

A. Change Initial Power State

B. Unbind from the Template

C. Disassociate Service Profile

D. Start Fault Suppression

正解: C

質問 5

During a Vblock System 720 deployment, the customer asks you to change the boot LUN for a pair of ESXi test servers. They want to preserve the existing configuration while testing the latest version of ESXi on a larger boot device. You have provisioned the devices from the storage array by simply adding the device to the correct storage group.
What must be done to allow the new devices to be installed with the latest version of ESXi so the host will boot?

A. Modify the storage group on the VMAX to change the LUN ID between the two devices.

B. Modify the boot policy associated with the service profile to boot from LUN ID (1).

C. Modify the storage group on the VMAX to remove the LUN ID (0).

D. Create a new boot policy and associate it with a service profile to boot from LUN ID (1).

正解: D

質問 6

You have identified a blade that has faulty hardware and must be replaced. You have an unused blade that is not associated with any service profile.
What are two ways to provision the unused blade with the same policies? (Choose two.)

A. Change the service profile association.

B. Change the UUID of faulty blade to that of the unused blade.

C. Clone the service profile and apply it to the unused blade.

D. Create a new service profile template from the faulty blade.

正解: A,C

質問 7

Which L1/L2 connectivity condition must be met for UCS fabric interconnects to work in a cluster?

A. The L1 and L2 ports on both fabric interconnects are routed.

B. The L1 and L2 ports on both fabric interconnects are locally switched.

C. The L1 and L2 ports are cross connected between fabric interconnects.

D. The L1 and L2 ports are direct connected between fabric interconnects.

正解: D

質問 8

As part of a Vblock System 340 deployment, you are asked to install an additional UCS chassis with 2-2204 IOM and 8 B-Series blades. The fabric interconnects have available capacity but the customer has not purchased new licenses.
Which impact will licensing have on the installation?

A. Cisco UCS Manager initiates a 120-day grace period for ports without a license.

B. The ports will provide connectivity but will broadcast license compliance warning messages.

C. Vblock System 340 ships with all fabric interconnect ports licensed.

D. The unlicensed ports will not provide server or storage connectivity.

正解: A

質問 9

You want to associate a service profile in UCS.
Which action would you perform?

A. Select the chassis that you want to associate.

B. Select the service offering that you want to associate.

C. Select Change Service Profile Association on the service profile.

D. Select the ESXi server that you want to associate.

正解: C

解説: (PassTest メンバーにのみ表示されます)

質問 10

Which policy is used to determine server boot order?

A. BIOS policy

B. power control policy

C. maintenance policy

D. boot policy

正解: D

VCE Vblock® Systems Deployment and Implementation - Compute - 210-020 模擬練習