VMware vSphere 8.x Advanced Design - 3V0-21.23 模擬練習
Refer to the exhibit.
An architect is assigned a new project to design a VMware hybrid cloud solution.
The project is following a proven design methodology following the V-Model of systems engineering and verification. The selected methodology follows these phases: Assess, Design, Deploy and Validate.
Which activity would be conducted during the Design phase?
An architect is assigned a new project to design a VMware hybrid cloud solution.
The project is following a proven design methodology following the V-Model of systems engineering and verification. The selected methodology follows these phases: Assess, Design, Deploy and Validate.
Which activity would be conducted during the Design phase?
正解: B
An architect is tasked with an application migration to a new VMware Cloud platform. The application service owner assistance from the architect to identify the technical requirements of the application.
The following has been made available following initial discussions:
A VMware Aria Operations report containing current resource usage
The output from a planning session including a roadmap for planned service growth A service dependency map from the company's IT operations management tool The desired consolidation ratio for the target platform is 10:1 The applications hosting budget is reducing by 10% Which two contain the technical requirements of the application? (Choose two.)
The following has been made available following initial discussions:
A VMware Aria Operations report containing current resource usage
The output from a planning session including a roadmap for planned service growth A service dependency map from the company's IT operations management tool The desired consolidation ratio for the target platform is 10:1 The applications hosting budget is reducing by 10% Which two contain the technical requirements of the application? (Choose two.)
正解: B,E
An architect is working on the cluster layout design for a new vSphere solution. The resource requirements for the first cluster state that memory demand can experience spikes of up to 20% over the documented average demand during peak business hours and the cluster must be able to handle these spikes without contention.
Which design quality is being referenced?
Which design quality is being referenced?
正解: C
解説: (PassTest メンバーにのみ表示されます)
A company has the requirement to ensure that business-critical applications have the necessary network bandwidth to function optimally and maintain a consistent quality of service (QoS).
Which statement would be included in the conceptual design to support this requirement?
Which statement would be included in the conceptual design to support this requirement?
正解: B
An architect is working on a security design for a shared storage environment. The storage array provides connectivity by the NFS protocol.
Which two design decisions could the architect include for this solution? (Choose two.)
Which two design decisions could the architect include for this solution? (Choose two.)
正解: B,C
解説: (PassTest メンバーにのみ表示されます)
An architect is designing the access management component of a vSphere-based solution. During a requirements gathering workshop, the customer states that the architecture must use a centralized user authentication solution.
The architect decides that an Open Lightweight Directory Access Protocol (OpenLDAP) solution would meet the requirement. The security team intervenes and requires that the solution use the corporate Active Directory Domain Services solution.
At which point did the architect's design become constrained?
The architect decides that an Open Lightweight Directory Access Protocol (OpenLDAP) solution would meet the requirement. The security team intervenes and requires that the solution use the corporate Active Directory Domain Services solution.
At which point did the architect's design become constrained?
正解: A
解説: (PassTest メンバーにのみ表示されます)
An architect is tasked with designing a new workload domain in an existing VMware Cloud Foundation environment. The customer requirement is to physically separate the NSX host overlay network traffic from other management networks flows.
Which design decision should the architect make to meet this requirement?
Which design decision should the architect make to meet this requirement?
正解: B
解説: (PassTest メンバーにのみ表示されます)
An architect is designing the virtual networking components of a vSphere-based solution that will provide an environment for the development of a new latency sensitive stock trading application.
The following information was identified within the initial meeting with the customer:
The customer has vCenter Standard and vSphere Standard licenses left over from a previous project.
The customer's CFO has approved budget for additional purchases, if required.
The following requirements were also identified during the meeting:
The solution must support 500 development workloads concurrently running in the secondary site.
The solution must support the ability to complete all vSphere Operational Management centrally.
The solution must ensure business-critical applications are not impacted by vSphere system-level operations.
Given the requirements, the architect has decided on a single 20-node cluster for development.
Which three additional design decisions should the architect make to meet these requirements? (Choose three.)
The following information was identified within the initial meeting with the customer:
The customer has vCenter Standard and vSphere Standard licenses left over from a previous project.
The customer's CFO has approved budget for additional purchases, if required.
The following requirements were also identified during the meeting:
The solution must support 500 development workloads concurrently running in the secondary site.
The solution must support the ability to complete all vSphere Operational Management centrally.
The solution must ensure business-critical applications are not impacted by vSphere system-level operations.
Given the requirements, the architect has decided on a single 20-node cluster for development.
Which three additional design decisions should the architect make to meet these requirements? (Choose three.)
正解: B,D,E
解説: (PassTest メンバーにのみ表示されます)
An architect is reviewing the security and compliance requirements for a new application that will be hosted on a vSphere 8 environment.
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SAN Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machines The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SAN Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machines The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
正解: B,D,F
An architect is documenting the logical design for a new vSphere solution. The following requirements have been provided to the architect by the customer for the design:
The solution must be deployed in two locations: DC1 and DC2
The solution must limit the impact radius of accidental changes by administrators The solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24 hours The solution must allow workloads to run in both DC1 and DC2 during normal operations The solution must allow workloads to be moved bi-directionally between DC1 and DC2 The solution must use hyper-converged infrastructure for the virtual machine storage The customer has also confirmed that the network connection between DC1 and DC2 has a 10 Gbps bandwidth with a maximum round trip latency of 4 ms.
The architect recommends the following design decision:
Use separate clusters in DC1 and DC2 to form a multi-region design
What should the architect include as justification for this design decision?
The solution must be deployed in two locations: DC1 and DC2
The solution must limit the impact radius of accidental changes by administrators The solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24 hours The solution must allow workloads to run in both DC1 and DC2 during normal operations The solution must allow workloads to be moved bi-directionally between DC1 and DC2 The solution must use hyper-converged infrastructure for the virtual machine storage The customer has also confirmed that the network connection between DC1 and DC2 has a 10 Gbps bandwidth with a maximum round trip latency of 4 ms.
The architect recommends the following design decision:
Use separate clusters in DC1 and DC2 to form a multi-region design
What should the architect include as justification for this design decision?
正解: A
解説: (PassTest メンバーにのみ表示されます)