ED0-002問題集、Ericsson実際の試験問題

質問 1

When working with the RBS, you should remove_____.

A. bracelets

B. wrist watches

C. All of the above

D. rings

正解: C

質問 2

In the RBS 2106 and 2206, the CXU is normally located__.

A. Below the PSU/DXU rack

B. Above the PSU/DXU rack

C. Between the PSU and DXU

D. Between the dTRUs and CDU rack

正解: D

質問 3

What is the proper resistance of an ESD wrist strap?

A. 1 Mega ohm (MO)

B. 1 MO

C. 10 O

D. 1 ohm (O)

正解: A

質問 4

How else can you tell the T1 has reached the cabinet if the DXU Operational LED is off??

A. The associated Port LED(on the DXU)is fixed green

B. The DXU Local LEDis flashing yellow

C. There is no other way

D. The dTRU Operational LED is fixed green

正解: A

質問 5

The abbreviation "VSWR" stands for___.

A. Voltage Standing Wave Ratio

B. Very Strong Wave Radio

C. Variable Signal Wave Radio

D. Voltage Strength Wire Ratio

正解: A

質問 6

A site has one T1, two cabinets, and three sectors. The cabinets should be set up as which one of the following configurations?

A. First cabinet TEI value is 62 stand-alone; second cabinet TEI value is 61 cascaded

B. First cabinet TEI value is 62 stand-alone; second cabinet TEI value is 62 cascaded

C. First cabinet TEI value is 62 cascaded; second cabinet TEI value is 61 stand-alone

D. Doesn??t matter what the TEI values are

正解: C

質問 7

The External Condition Mao Class1(EC1)fault(s)from the above print out is?

A. EC1:9

B. None of the above

C. EC1:4

D. EC1:10

E. EC1:7 and EC1:18

正解: C

質問 8

If a three-sector site has six radios, how many cells/ Transceiver Groups does it have?

A. 3/1

B. 3/2

C. 1/3

D. 1/2

正解: A

質問 9

real-time "scoreboard" current active hardware alarms can be viewed using ___?

A. ALB

B. ASM

C. ALV

D. ATR

正解: B

質問 10

The abbreviation "COD" stands for_____.

A. None of the above

B. Command Document

C. Command On Demand

D. Command Description

正解: D

Ericsson bts competence - ED0-002 模擬練習