NCP-US問題集、Nutanix実際の試験問題

質問 1

An administrator has recently added several NGT-enabled VMs with in-guest iSCSI initiators to a Volume Group (VG) using IP addresses in the VG allowlist. Several days later, the administrator restored the VG, after which the VMs lost connectivity to the Volume Group.
What should the administrator have done differently to prevent this from happening?

A. Use the VM hostname in the VG allowlist.

B. Use the iSCSI IQN entry in the VG allowlist.

C. Use the VM UUID in the VG allow list.

D. Use the NIC MAC address of the VM's in the VG allow list.

正解: B

質問 2

An administrator is in the process of migrating shares from one Nutanix Files cluster in the primary data center (DC) to another Files cluster running in a new DC that has been built. The administrator is using Smart DR to perform this migration as it provides less downtime. Upon a successful sync during a scheduled maintenance window, users are unable to save to the new share. How should the administrator resolve the issue?

A. Enable Self-Service Restore

B. Set share read-only to false

C. Set share type to multiprotocol

D. Enable Continuous Availability

正解: B

質問 3

Which statement is true regarding Self-Service Restore?

A. Supports Windows and Linux.

B. Supports 15 minute snapshots.

C. Supported with a Starter license.

D. Does not require NGT on the VM.

正解: D

質問 4

An administrator has files located in shares, buckets, and volumes. In which environment can File Analytics be used to collect metadata?

A. AD authenticated SMB

B. CHAP authenticated iSCSI

C. Kerberos authenticated NFS v4.0

D. Kerberos authenticated S3

正解: A

質問 5

Upon further investigation, the administrator notices the below message in the logs:
2024/07/25 10:55:23.937962 utils.go:32:
[INFO] Start wget for file fraser-6.10- stable_build_release.json. Source: http://x.x.x.x/release/builds/msp-builds/msp- services/464585393164.dkr.ecr, us-west-2.amazonaws.com/nutanix-msp/idf-container/fraser-6.10- stable_build_release.json, Destination directory: /home/msp_config/airgap/
2024/07/25 10:55:23.945387 utils.go:32:
[INFO] Start wget for file fraser-6.10- stable_build_release.tar.xz. Source: http:/x.x.x.x/release/builds/msp-builds/msp- services/464585393164. dkr.ecr.us-west-2.amazonaws.com/nutanix-msp/idf-container/fraser-6.10- stable_build_release.tar.xz, Destination directory: /home/msp_config/airgap/
2024/07/25 10:55:23.949580 utils.go:58:
[ERROR] Failed to wget fraser-6.10- stable_build_release.tar.xz from http://x.x.x.x/release/builds/msp-builds/msp- services/464585393164.dkr.ecr.us-west-2.amazonaws.com/nutanix-msp/idf-container/fraser-6.10- stable_build_release.tar.xz; output: --2024-07-25 10:55:23-- http:/x.x.x.x/release/builds
/men-builds/men-services/464585393164 der ear 118-west-2.amazonaws.com/nutaniy-men/idf- stable_build_release.tar.xz. Source: http:/x.x.x.x/release/builds/msp-builds/msp- services/464585393164.dkr.ecr.us-west-2.amazonaws.com/nutanix-msp/idf-container/fraser-6.10- stable_build_release.tar.xz, Destination directory: /home/msp_config/airgap/
2024/07/25 10:55:23.949580 utils.go: 58:
[ERROR] Failed to wget fraser-6.10- stable_build_release.tar.xz from http://x.x.x.x/release/builds/msp-builds/msp- services/464585393164. dkr.ecr.us-west-2.amazonaws.com/nutanix-msp/idf-container/fraser-6.10- stable_build_release.tar.xz: output: --2024-07-25 10:55:23-- http:/x.x.x.x/release/builds
/msp-builds/msp-services/464585393164.dkr.ecr.us-west-2.amazonaws.com/nutanix-msp/idf- container/fraser-6.10-stable_build_release.tar.xz Connecting to x.x.x.x:80... failed.
HTTP request sent, awaiting response... 404 Not Found
2024-07-25 10:55:23 ERROR 404 Not Found
What is the cause of this issue?
/msp-pias/msp-services/4104.akc.ecr.us-west-2.amazonaws.com/nutanix-msp/lar- container/fraser-6.10-stable_build_release.tar.xz Connecting to x.x.x.x:80... failed.
HTTP request sent, awaiting response... 404 Not Found
2024-07-25 10:55:23 ERROR 404: Not Found
What is the cause of this issue?

A. MSP needs to reach the web server over port 443.

B. Prism Central needs to reach the web server over port 443.

C. Prism Central needs to reach the web server over port 80.

D. MSP needs to reach the web server over port 80.

正解: D

質問 6

An administrator has an existing four-node Nutanix cluster at a primary site with three FSVM instances deployed. They want to configure Smart DR on a five-node Nutanix cluster at the recovery site.
How many FSVMs should be deployed on the recovery site for Smart DR?

A. 3

B. 4

C. 1

D. 2

正解: A

質問 7

An administrator is preparing to deploy Nutanix Objects on an AHV-based Nutanix cluster in a multi-cluster environment. The Virtual IP address and Data Services IP address have already been configured on the AHV cluster.
Which additional IP address should be configured for successful Objects deployment?

A. Fallback Virtual IP of Prism Element on AHV cluster

B. IPv6 address of Prism Element on AHV cluster

C. Fallback Virtual IP on cluster where Prism Central is deployed

D. Data Services IP on cluster where Prism Central is deployed

正解: C

質問 8

An administrator is trying to configure Mutual CHAP on a Linux guest. During configuration, the administrator keeps getting an Authentication Failure error.
What should the administrator do to resolve the issue?

A. Configure the client and target with the same password.

B. Configure the client and target with different passwords.

C. Configure the password on the client, leave the target password blank.

D. Configure the password on the target, leave the client password blank.

正解: A

質問 9

A user is logged into Prism Central and has been tasked with creating a new object store.
What could be the cause no clusters are being listed?

A. Prism Element was registered to Prism Central only 1 hour ago.

B. Access was granted to Prism Element less than 5 minutes ago.

C. Only the local Prism Central Admin can create object stores.

D. Only the local Prism Element Admin can create object stores.

正解: B

質問 10

An administrator is deployingFile Analytics. The following subnets are available:
CVM subnet: 10.1.1.0/24
AHV subnet: 10.1.2.0/24
Nutanix Files client network: 10.1.3.0/24
Nutanix Files storage network: 10.1.4.0/24
The administrator has reserved10.1.4.100as the File Analytics IP. However, the deploymentfailswith the error shown:
"Error creating volume group, please check logs for more details."
What action must the administrator take to successfully deploy File Analytics?

A. Allow port 445 in the firewall.

B. Re-deploy File Analytics on the Files storage network.

C. Allow port 139 in the firewall.

D. Re-deploy File Analytics on the Files client network.

正解: D

Nutanix Certified Professional - Unified Storage v6.5 - NCP-US 模擬練習