IBM AnyPlace Kiosk Models 5xx 7xx and 9xx Technical Mastery (P6040-015) - P6040-015 模擬練習

A. a pair of glass panels, each having a thin metallic electrically conductive and resistive layer separated by a thin
space

B. a glass panel with a conductive coating on top and a polyester top sheet with a conductive coating on the bottom

C. a printed circuit board frame around the perimeter of the display; on two sides there are closely spaced LEDs, and
on the opposing two sides there are matching phototransistors

D. a glass panel where the sensor has a conductive coating on the front surface with wires connected to each corner; a
small voltage is applied to each of these four corners

A. use a soft cloth moistened with water

B. use a cleaner especially made for computer equipment

C. spray glass cleaner on the area that needs cleaning and wipe with a paper towel

D. spray a cloth with any ammonia-based cleaner

A. AnyPlace Line or Omni Scanner

B. printer

C. keyboard

D. MSR

E. cash drawer

A. the side access door only

B. the hard disk drive door only

C. the hard disk drive and side access doors

D. the hard disk drive door and the rear cover

A. install two memory modules that are matched by manufacturer, speed, and size

B. verify that the maximum amount of memory has been installed

C. verify that the correct system board was ordered to support dual-channel memory

D. install an additional memory module and enable dual-channel memory through the Utilities menu

A. replace the touch screen assembly

B. replace the graphics chip

C. replace the inverter card

D. replace the system board

A. It allows the AnyPlace Kiosk to support 64-bit versions of Windows operating systems.

B. It doubles the amount of data sent from RAM to the CPU when matching SO-DIMMs are installed.

C. It allows the system memory to be expanded up to 4GB.

D. It allows the AnyPlace Kiosk to perform well in multitasking environments.