有効なCertified Implementation Specialist CIS-Discovery問題集はあなたの合格を必ず保証します
CIS-Discovery問題集でリアル試験問題でテストエンジン問題集でトレーニング
ServiceNow Cis-Discovery Certification Examは、発見スケジュール、プローブ、センサー、資格情報の構成と管理など、ServiceNow Discoveryアプリケーションに関連する幅広いトピックをカバーしています。この試験では、ISMやCMDBなどの他のServiceNowアプリケーションとの発見の統合に関連するトピックもカバーしています。さらに、試験では、ServiceNowプラットフォーム全体での役割を含め、ServiceNow Discoveryアプリケーションの全体的なアーキテクチャと機能についての候補者の理解をテストします。
質問 # 64
In order to use Debug from the Pattern Designer, you must have what?
- A. the admin role
- B. a discoverable CI
- C. Service Mapping installed
- D. a proxy server
正解：C
質問 # 65
What related list on a classifier dictates which Horizontal Pattern probe is launched?
- A. Pattern probes
- B. Discovery Log
- C. Triggers probes
- D. Classification Criteria
正解：C
解説：
A classifier is a set of rules that identifies a device type based on the results of a probe. A classifier can have one or more related lists that define the classification criteria, the pattern probes, and the triggers probes. The pattern probes related list specifies which horizontal discovery pattern to run for the device type. The triggers probes related list specifies which probes to run after the device is classified, and before the horizontal discovery pattern is executed. The triggers probes can be used to gather additional information or credentials that are needed for the horizontal discovery pattern12.
References:
* 1: ServiceNow Discovery Overview, page 9
* 2: ServiceNow Discovery Documentation, Classifiers section
質問 # 66
In a pattern operation, which of the following correctly calls the value of the executableDir variable from the tabular process variable?
- A. $process_executableDir
- B. process(executableDir)
- C. $process.executableDir
- D. "process_executableDir"
正解：C
解説：
The $process.executableDir expression correctly calls the value of the executableDir variable from the tabular process variable. The process variable is a tabular variable that contains the output of the ps command, which lists the processes running on a CI. The executableDir variable is a column name that holds the directory path of the executable file for each process. To access the value of a column name from a tabular variable, you need to use the dot notation, such as $variable.columnName12.
References
1: Pattern variables - Product Documentation: Tokyo - Now Support Portal
2: Examples of EVAL scripts used in Discovery patterns - ServiceNow
質問 # 67
How does MidServer communicate with ServiceNow.
Response:
- A. Outbound where ServiceNow sends messages to MidServer
- B. Outbound by sending messages to ServiceNow on port 443
- C. Bidirectional where ServiceNow sends messages to MidServer
正解：B
質問 # 68
Discovery patterns are best described as ______ .
Response:
- A. summary providers of a schedule launched Discovery
- B. operations separating data, processes, and administrative tasks into domains
- C. operations allowing Discovery to find CIs on your network and tables to populate the CMDB
- D. a graphical representation of a discovery which includes information about each sensor and probe used
正解：C
質問 # 69
Which of the following MID Server Parameters cannot be modified through the platform UI?
- A. url
- B. mid.ssh.session_timeout
- C. mid.windows.management_protocol
- D. name
正解：D
解説：
The MID Server parameters like 'mid.ssh.session_timeout', 'url', and 'mid.windows.management_protocol' can be modified through the ServiceNow platform UI under the MID Server configuration settings. These parameters control various aspects of the MID Server's operation, such as timeout settings for SSH sessions, the URL for the MID Server to communicate with the ServiceNow instance, and the management protocol to use for Windows servers, respectively. The 'name' of the MID Server, however, is not typically a parameter that can be changed through the UI as it is a unique identifier for the MID Server within the ServiceNow instance. Once a MID Server is registered with a name, that name is usually persistent and not intended to be modified through configuration settings.
質問 # 70
For CMDB Health, relationships can be which of the following choices? (Choose three.)
- A. Duplicate
- B. Stale
- C. Recommended
- D. Required
- E. Orphan
正解：A、B、E
質問 # 71
It is advisable for a MID Server to have access to ______ .
Response:
- A. installservicenow.com
- B. docs.servicenow.com
- C. servicenow.com
- D. install.service-now.com
正解：D
質問 # 72
Which choice best describes a horizontal discovery pattern?
- A. Steps that execute operations
- B. Port scanning tool
- C. Classifiers that execute probes
- D. Credential depot
正解：A
解説：
A horizontal discovery pattern is a set of steps that execute operations to identify, classify, and populate attributes for configuration items (CIs) of a specific category or class, such as infrastructure or application. A horizontal pattern can be applied to any operating system or platform that supports the required protocols and commands12.
References:
* Horizontal discovery patterns
* Discovery pattern types
質問 # 73
File-based Discovery is triggered during the.
- A. Identification Phase
- B. Exploration Phase
- C. Scan Phase
- D. Classify Phase
- E. Pattern Phase
正解：B
解説：
File-based Discovery is a process that helps identify what software is running on your Windows and UNIX servers and devices, even if there is no registration information available. File-based Discovery is triggered in the exploration phase of normal Discovery, after the target device has been classified and identified. File- based Discovery probes execute a scan searching for specific file extensions or file names in paths that you configure. The resulting file information is returned in the probe payload. The sensor attempts to match the discovered files with installed software, using the file name, size, and version returned by the probe.
1: File-based Discovery, File Based Discovery - Support and Troubleshooting Reference: https://docs.servicenow.com/bundle/paris-it-operations-management/page/product/discovery/ concept/file-based-discovery.html
質問 # 74
During the Discovery process, what determines if an Asset record is created?
- A. CMDB
- B. Configuration Item
- C. Model Product
- D. ECC Queue
- E. Model Category
正解：E
質問 # 75
Which choice will populate the Location field for a discovered CI?
- A. Location field for a Port Probe
- B. Location field for a Discovery Schedule
- C. Location field for a parent CI Type
- D. Location report from the Discovery Dashboard
正解：B
解説：
The Location field for a discovered CI is populated by the Location field of the Discovery Schedule that triggered the discovery of that CI. This is done by the DiscoverySensor script, which gets the location ID from the Discovery Schedule and passes it to the Shazzam probe, which then updates the cidata with the location information. The Location field for a parent CI Type, a Port Probe, or a Discovery Dashboard report does not affect the Location field for a discovered CI.
References: Discovery - How Location field is set for a CI, How to pass discovery schedule fields to a CI record via discovery
質問 # 76
Which of the choices provides active discovery errors with a help link for each error?
- A. IP Address Failure Report
- B. Discovery Dashboard
- C. MID Server Dashboard
- D. Discovery Schedule
正解：B
解説：
The Discovery Dashboard provides a summary of the Discovery status, including the number of active discovery errors, the number of devices discovered, and the number of credentials used. Each error has a help link that provides more information about the cause and possible solutions.
References:
* Discovery Dashboard
* Discovery troubleshooting | Error messages
質問 # 77
Discovery finds and maps dependencies for the following types of storage devices. (Choose three.)
- A. Storage area network (SAN)
- B. Multiple area network (MAN)
- C. Network-attached storage (NAS)
- D. Redundant Array of Independent Disks (RAID)
- E. Direct-attached storage (DAS)
正解：A、C、E
質問 # 78
The deletion strategy is set to 'Mark as absent' for related Disk Cls discovered via the Linux Server pattern. If a related Disk Cl is discovered during the Linux Server discovery and then the same related Disk CI is not found the next time the Linux Server is discovered, the following will happen:
- A. The Disk Status CI (install_status) is set to Absent.
- B. The Linux Server CI Status (install_status) is set to Absent.
- C. The Disk CI Operational Status (operational_status) is set to Non-Operational.
- D. The Linux Server CI Operational Status (operational_status) is set to Non-Operational.
正解：A
解説：
The deletion strategy 'Mark as absent' means that when a related CI that was previously discovered by a pattern is no longer found, the install_status attribute of that CI is set to Absent. This indicates that the CI is missing or removed from the network. The main CI (in this case, the Linux Server CI) is not affected by the deletion strategy of the related CI (in this case, the Disk CI)12.
References1: Set a deletion strategy - Product Documentation: San Diego - ServiceNow2: Network adapter status setting to "Absent" in EMC ... - ServiceNow ...
質問 # 79
Which choice represents the three best ways of extending Discovery?
- A. Orchestration, Classifiers, Probes & Sensors
- B. Classifiers, Probes & Sensors, Discovery Patterns
- C. Fingerprinting, Classifiers, Discovery Patterns
- D. Orchestration, Classifiers, Discovery Patterns
- E. Classifiers, Fingerprinting, Probes & Sensors
正解：B
解説：
ServiceNow Discovery can be extended in three main ways: Classifiers, Probes & Sensors, and Discovery Patterns. Classifiers are used to identify the type of device or application that is being discovered, based on the information returned by a probe. Probes are commands or scripts that are executed on the target device or application to collect data. Sensors are scripts that process the data collected by probes and create or update configuration items (CIs) in the CMDB. Discovery Patterns are graphical representations of the discovery process that can be customized or created to discover specific types of devices or applications, using classifiers, probes, and sensors as building blocks.
References:
* Discovery overview - Product Documentation: Vancouver - Now Support Portal
* Create a Discovery CI classification - Product Documentation: Vancouver - Now Support Portal
* Discovery probes and sensors - Product Documentation: Vancouver - Now Support Portal
* Discovery patterns - Product Documentation: Vancouver - Now Support Portal
質問 # 80
Which of the following choices explain differences between Service Mapping and Discovery? (Choose two.)
- A. Discovery addresses inventory-related use-cases, while Service Mapping allows for the creation of accurate maps of application service topologies.
- B. Discovery requires agent installation to find hardware devices, Service Mapping requires agents for software.
- C. Discovery utilizes IP address ranges for initial discovery, Service Mapping uses entry points.
- D. Discovery finds applications and devices on your network, Service Mapping monitors those devices.
正解：C、D
質問 # 81
Select correct statements based on data below:
- Operation: Merge Table
- First Table: $user_details
- Second Table: $process_information
- Target Table: $cmdb_ci_web_server
Merge criteria are satisfied when any of the following conditions are met:
- $process.executablePath contains "mongoose"
- Unmatched values are removed
(Choose 3 answers)
Response:
- A. Attributes from First Table and Second Table populates a table with the same name as a ServiceNow CMDB table.
- B. For this operation to run, it is required that variable process.executablePath contains some data.
- C. If a value is unmatched, it will be merged into the Target Table anyway.
- D. It is very likely that this operation is part of a step on a pattern set to Application Pattern Type.
正解：A、B、D
質問 # 82
Which of the following executes the osquery commands on agents to gather attribute details from a CI?
- A. ACC for Discovery
- B. Policies
- C. Agent Collector
- D. Agent listener
- E. Check Definitions
正解：C
解説：
Agent Collector is the component that executes the osquery commands on agents to gather attribute details from a CI. Agent Collector is a feature of the Agent Client Collector (ACC) for Discovery, which is an integration that enables ServiceNow Discovery to use osquery to collect data from Linux and Windows devices that have the Elastic Agent installed1. Agent Collector allows you to define osquery queries and assign them to policies that target specific devices or groups of devices2. Agent Collector then runs the queries on the agents and sends the results back to the instance, where they are processed by the Agent Listener and stored in the CMDB3.
1: Agent Client Collector for Discovery - ServiceNow 2: Create an Agent Collector policy - ServiceNow 3: Agent Client Collector for Discovery architecture - ServiceNow
質問 # 83
What action should be taken when the Discovery Status of a device shows "Active, Couldn't Classify".
Response:
- A. Create/Update the Classifier for that device CMDB Class
- B. Update the firewalls
- C. Update the credentials
正解：A
質問 # 84
There can be ______ CI Identifier(s) configured per CI Class.
Response:
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 85
specifies the CI attributes that a data source is authorized to update for a given CMDB table and prevents unauthorized data sources from overwriting the attribute values.
Response:
- A. Reconciliation Definition
- B. Discovery Rules
- C. CI Identifier Rules
- D. Event Rules
正解：A
質問 # 86
What is the advantage of Discovery Range Sets?
- A. Range Sets show the number of IPs in a subnet.
- B. Range Sets provide flexibility in management and identification of known networks for simplicity of administration.
- C. All the necessary Range Sets are installed in the base installation of Discovery.
- D. Range Sets are the only way to have more than one IP Range defined within a Discovery Schedule.
正解：B
解説：
Discovery Range Sets in ServiceNow Discovery offer a flexible way to manage and identify networks. They simplify the administration of network discovery by allowing administrators to define groups of IP ranges.
This organization helps in effectively managing and targeting different network segments without needing to define each IP range in individual Discovery Schedules. Range Sets do not necessarily show the number of IPs in a subnet, nor are they the only way to define multiple IP ranges in a schedule.
質問 # 87
Which choice best describes a Functionality Definition?
- A. Defines what CI identifiers to use.
- B. Defines the IP addresses to discover.
- C. Defines what Behavior to use from a Discovery Schedule.
- D. Defines what protocols to detect from within a Behavior.
正解：C
質問 # 88
What would be the best ways to extend Discovery capabilities?
Response:
- A. Discovery Patterns, Orchestration, Classifiers
- B. Discovery Patterns, Classifiers, Probes & Sensors
- C. Classifiers, Fingerprinting, Probes & Sensors
- D. Classifiers, Orchestration, Probes & Sensors
- E. Discovery Patterns, Fingerprinting, Classifiers
正解：A
質問 # 89
......
ServiceNow Cis-Discovery認定試験は、ServiceNow Discoveryを使用してツールのスキルと知識を検証したい専門家向けに設計されています。認定試験は、組織内の発見プロセスの管理を担当するITの専門家、システム管理者、およびサービスデスクマネージャーを対象としています。認定プログラムは、知識とスキルの向上、より良い雇用機会、より高い給与など、さまざまな利点を提供します。 ServiceNow Cis-Discovery Certified Professionalになることで、ServiceNow Discoveryの専門知識を実証することができます。
ServiceNow CIS-Discovery問題を提供していますCertified Implementation Specialist問題集と完璧な解答付き：https://www.passtest.jp/ServiceNow/CIS-Discovery-shiken.html
CIS-Discoveryテスト問題集とオンライン試験エンジンはここにある：https://drive.google.com/open?id=1t3yy99tY36YMEyR0VFYPKvpx8mr3WOlG