無料SAP E-BW4HANA214学習ガイド試験問題と解答
E-BW4HANA214試験問題集、E-BW4HANA214練習テスト問題
SAP E-BW4HANA214 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 25
What is a valid data target in an SAP HANA Analysis Process without using a Data Trasfer Process?
- A. DataStore object (advanced)
- B. CompositeProvider
- C. InfoObject with Attributes
- D. SAP HANA Database Table
正解：D
質問 # 26
You model an Open ODS View on an SAP HANA table. You would like to persist the data in a SAP BW/4HANA object based on the 'Generate Dataflow...' function.
Which objects are created automatically? Note: there are 3 correct answers to thi s question
- A. DataSource
- B. DataStore object (advanced)
- C. Transformation
- D. InfoSource
- E. InfoPackage
正解：B、C、D
質問 # 27
Which of the following statements describe the benefits of the SAP BW/4HANA Content Add-on? (3 Answers)
- A. The content delivers Transformations that are optimized to enable push-down to SAP HANA
- B. The content delivers optimized process chain to load LSA++ structured data models
- C. The content leverages new navigational attributes of the SAP standard time Characteristics
- D. The content follows the LSA++ recommendation and delivers an LSA++ aligned structure
- E. The content delivers predefined settings for SAP BW/4HANA Data Tiering Optimization (DTO)
正解：A、C、D
質問 # 28
You are running SAP S/4HANA On-Premise. You would like to extract data to SAP BW/4HANA.
Which tool does SAP recommend to evaluate the metadata of CDS-based extractors?
- A. SAP S/4HANA Query Browser
- B. SAP BW/4HANA Cockpit
- C. SAP BW/4HANA Modeling Tools
- D. SAP S/4HANA View Browser
正解：C
質問 # 29
Which SAP HANA XS classic information view can you convert directly into an SAP HANA HDI Calculation View?
- A. SAP HANA Calculation View (scripted)
- B. SAP HANA Analytic View
- C. SAP HANA Attribute View
- D. SAP HANA Calculation View (graphical)
正解：D
質問 # 30
Which statement describes the "Intelligent PULL Run Mode" of Streaming Process Chain property?
- A. The concept is obsolete in SAP BW/4HANA. SAP recommends leveraging the new "PUSH Run Mode" for Streaming Process Chain instead
- B. An SAP BW/4HANA Process Chain is scheduled as a periodic job with high frequency up to each minutes. The Process Chain runs accordingly
- C. SAP BW/4HANA checks once a minute if a new record is generated in the source system. If this check is successful, the Process Chain starts immediately
- D. SAP BW/4HANA receives a trigger from a Daemon in the source system. This event runs the Process Chain immediately
正解：C
質問 # 31
Which operations can you perform in the SAP BW/4HANA Cockpit? Note: there are 3 correct answers to this question.
- A. Create and maintain BW Query variables
- B. Manage requests of DataStore objects (advanced)
- C. Create and maintain indicesfor DataStore objects (advanced)
- D. Monitor Process Chains
- E. Create and maintain Analysis Authorizations
正解：B、D、E
質問 # 32
You use the SAP BW/4HANA Transfer Cockpit to prepare your SAP BW system for an in place conversion to SAP BW/4HANA. Which functions are provided by this cockpit? Note: There are 2 correct answers to this question.
- A. Execute Pre-Checks
- B. Transfer 3.x DataFlow into 7.x DataFlows
- C. Transfer Bex Queries into BW Queries
- D. Transfer Standard Authorizations
正解：A、D
質問 # 33
How does column-based storage enable data to be read faster in SAP HANA?
- A. Individual columns can be transferred to an SAP HANA optimized row-based format for faster access
- B. Individual columns are read-optimized by writing into a main store and a delta ^ store
- C. Individual columns can be processed at the same time by different CPU cores
- D. Individual columns contain all of the information for ine record
正解：A
質問 # 34
What are characteristics of SAP HANA modelling in XS Advanced? (2 Answers)
- A. Use of SAP HANA Studio as a user interface
- B. Import of SAP HANA HDI Calculation View as a file in a project
- C. Potential use of GitHub as a source code repository
- D. Deployment of external SAP HANA views generated from BW objects
正解：B、C
質問 # 35
What do the Remote Conversion approach and the Shell Conversion approach have in common? Note: There are 3 correct answers to this question.
- A. Both approaches uninstall the unsupported BW Add-ons from the sending BW system as the first activity
- B. Both approaches convert unsupported object types during import into the new SAP BW/4HANA system
- C. Both approaches are setup by installing required SAP notes via the SAP BW Notes Analyzer
- D. Both approaches require the SAP BW/4HANA Starter Add-on to be installed on the sending system
- E. Both approaches result in a SAP BW/4HANAsystem which has a new system ID Notes Analyzer
正解：B、C、E
質問 # 36
What are key results provided by the SAP BW/4HANA Readiness Check? (3 Answers)
- A. List of largest database table and additional sizing information
- B. List of all BW/4HANA incompatible SAP ERP DataSource
- C. List of all BW/4HANA incompatible add-ons in the system
- D. List of all BW/4HANA incompatible BW objects in the system
- E. List of all missing SAP notes for installing the SAP BW/4HANA Transfer Cockpit
正解：A、C、D
質問 # 37
Which features have been removed from SAP BW/4HANA compared to SAP BW powered by SAP HANA?
Note: there are 2 correct answers to this question.
- A. Execute Data Archiving Process (DAO)
- B. Execute Analysis Process (APD)
- C. Trigger Delta Merge
- D. Attribute Change Run
正解：B、D
質問 # 38
You create an SAP HANA HDI Calculation View in SAP Web IDE for SAP HANA and have to select a data category. Which data category can only use attributes in the Semantic nodes?
- A. Cube with Star Join
- B. SQL Access Only
- C. Dimension
- D. Cube
正解：C
質問 # 39
Why do you create a Semantic Group?
- A. To define settings for Data Tiering Optimization (DTO)
- B. To loadlnfoObject attribute with Enhanced Master Data Update
- C. To generate multiple similar DataStore objects (advanced)
- D. To create folders for SAP BW Query elements
正解：C
質問 # 40
You enable a DataStore object(advanced) for reporting by switching on the ""Externa SAP HANA view"" flag in the settings.
Which authorizations are used when you consume the generated SAP HANA view directly?
- A. The combination of the generated analytic privileges in SAP HANA and the analysis authorizations in SAP BW/4HANA
- B. The generated analytic privileges in SAP HANA
- C. The authorizations forthe HDI container access in SAP HANA
- D. The analysis authorizations in SAP BW/4HANA
正解：A
質問 # 41
You imported a project into SAP Web Ide for SAP HANA to develop an SAP HANA HDI Calculation View.
At which level do you have to assign a space?
- A. HDB Module
- B. Package
- C. Workspace
- D. Project
正解：D
質問 # 42
For which SAP Cloud system does SAP recommend using the SAP HANA SDI and its Odata adapter to load data into SAP BW/4HANA?
- A. SAP SuccessFactors
- B. SAP S/4HANA Cloud
- C. SAP Ariba
- D. SAP C/4HANA
正解：A
質問 # 43
A customers wants to convert from SAP BW powered by SAPHANA to SAP BW/4HANA. What additional value is offered by SAP BW/4HANA compared to SAP BW powered by SAP HANA?
- A. Leveraging the Data Tiering Optimization (DTO) concept
- B. Generating external SAP HANA Views for SAP BW Queries
- C. Storing data of DaraStore objects (advanced) in Extended Tables
- D. Creating HANA Analysis Processes (HAP)
正解：A
質問 # 44
......
最新のE-BW4HANA214実際の無料試験問題は更新された54問があります：https://www.passtest.jp/SAP/E-BW4HANA214-shiken.html
検証済みE-BW4HANA214問題集PDF資料 [2024年更新]：https://drive.google.com/open?id=1cXMS2LrOQPxMK5dhW-dq5cZ_TH19ZeIZ