Symantec 250-587最新問題集[2026]高得点を掴み取れ
250-587問題集PassTest100%合格率保証
質問 # 99
How should an administrator export all policies from a test environment to a production environment?
- A. export one policy template at a time
- B. locate the 'policy' folder under 'SymantecDLP' and copy all of the .XML files
- C. choose the option to 'export all' on the Manage > Policies > Policies List page
- D. navigate to System > Settings > Export and select 'All'
正解：A
質問 # 100
You have installed the Storage Foundation for Sybase. You want to temporarily suspend all write operations to all databases. What should you do?
- A. Use the Quiesce feature.
- B. Use the Cached Quick I/O feature.
- C. Use the Concurrent I/O feature.
- D. Use the Quick I/O feature.
正解：A
質問 # 101
Refer to the exhibit.
Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity. According to best practices, which option should be enabled during the baseline phase of policy risk reduction?
- A. enable auto-encryption
- B. EDM/IDM detection
- C. use secure storage
- D. change automated email responses
正解：B
質問 # 102
How should an administrator apply a policy to Network Discover scans?
- A. assign the policy group to the scan target
- B. assign the policy to the Network Discover Server
- C. choose the correct scan target in the policy destination
- D. choose the correct policy in the scan target
正解：A
質問 # 103
Which option should be used to optimize the performance of a network share Discover scan?
- A. use an incremental scan to only include previously unscanned items
- B. configure credential prefetching to reduce delay in authentication
- C. ensure that the target file system is defragmented regularly
- D. disable antivirus scanning for network shares on the detection server
正解：B
質問 # 104
Which two methods should an administrator use to exclude emails going to partner.com and all traffic going to a specific subnet? (Select two.)
- A. L7 sender filter
- B. L7 recipient filter
- C. IP filter
- D. Protocol filter
- E. Sender/User Matches pattern
正解：B、C
質問 # 105
You're the administrator of a production database environment, including a large transaction processing complex, a large decision support system, and smaller systems dedicated to supporting functions, such as backups. Uptime is critical, and the DBA for the environment has found the mechanisms at his disposal for sharing data among the environment's functions cumbersome. How can Storage Foundation's point-in-time copy capabilities help manage the environment more effectively? (Select two)
- A. You can use PITCs to summarize information accumulated by the OLTP system.
- B. You can use PITCs to propagate physical database objects between the OLTP system and decision support systems.
- C. You can use PITCs to enable real-time access to OLTP data by the decision support system.
- D. You can use PITCs to capture instant backup images.
- E. You can use PITCs to transfer daily transaction data between systems.
正解：B、D
質問 # 106
You are planning a relayout for a 10GB RAID-5 volume with a RAID-5 log to a stripe-mirror configuration. Dirty-region logging is indicated by the volume's size. How would your plan to address the logs?
- A. Remove the RAID-5 log and create a DRL prior to the relayout operation.
- B. Relayout will remove log plexes from the volume, but the DRL must be created after relayout is complete.
- C. Use the "convertlogs" option of vxassist to cause the relayout job to convert the log plexes.
- D. The RAID-5 log should be removed prior to the relayout and after the relayout completes, the DRL should be created separately.
正解：D
質問 # 107
Which response rule action will be ignored when using an Exact Data Matching (EDM) policy?
- A. All: Send Email Notification
- B. Network Prevent: Remove HTTP/HTTPS Content
- C. Network Protect: Copy File
- D. Endpoint Prevent: Notify
正解：D
質問 # 108
Which product can replace a confidential document residing on a share with a marker file explaining why the document was removed?
- A. Endpoint Discover
- B. Network Discover
- C. Mobile Prevent
- D. Network Protect
正解：D
質問 # 109
An administrator is checking System Overview and all of the detection servers are showing as 'unknown'. The Vontu services are up and running on the detection servers. Thousands of .IDC files are building up in the Incidents directory on the detection servers. There is good network connectivity between the detection servers and the Enforce server when testing with the telnet command. How can the administrator bring the detection servers to a running state in the Enforce UI?
- A. delete all of the .BAD files in the incidents folder on the Enforce server
- B. restart the Vontu Monitor Service on all of the detection servers affected
- C. ensure port 8300 is configured as open on the firewall
- D. ensure the Vontu Monitor Controller service is running on the Enforce server
正解：D
質問 # 110
Which is the correct installation sequence?
- A. Oracle > Enforce > Solution pack > detection server
- B. Enforce > Oracle > detection server > Solution pack
- C. Enforce > Oracle > Solution pack > detection server
- D. Oracle > Enforce > detection server > Solution pack
正解：A
質問 # 111
When you attempt to start the RAID-5 volume, you are prompted with an error message "VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity is stale." You want to remove this error and start the RAID-5 volume. How will you ensure that you do not encounter this error again?
- A. Use a single RAID-5 log plex in RAID-5 volumes.
- B. Use two or more RAID-5 log plexes in RAID-5 volumes.
- C. Change the subdisks.
- D. Reattach the subdisks.
正解：B
質問 # 112
Which user store is essential for using the user risk summary feature?
- A. Active Directory
- B. MySQL
- C. Tomcat
- D. Samba
正解：A
質問 # 113
You are using the Symantec Storage Foundation Web GUI to manage a tiered storage environment. The Storage Foundation Web GUI provides a mechanism that allows an improved level of data management over mechanisms. What is this mechanism?
- A. Hierarchical Storage Management
- B. Data management API
- C. File level data management
- D. Information Lifecycle Management
正解：C
質問 # 114
Consider a situation where you run the vxdmpadm start restore command and encounter an error message "VxVM vxdmpadm ERROR V-5-1-3243 The VxVM restore daemon is already running" How will you solve this error?
- A. Stop vxdmpadm and restart vxdmpadm.
- B. Stop vxdmpadm and start vxdarestore.
- C. Restart the all the VxVM daemons.
- D. Stop vxdmpadm and reboot the system.
正解：A
質問 # 115
A DLP administrator needs to decide if using Symantec Management Console (SMC) will provide additional functionality over the built-in Agent Actions that can be performed via Agents > Overview > Summary Reports.
What are two of the Agent Actions that can be performed with SMC that are unable to be used with the built-in Agent Actions? (Select two.)
- A. Toggle Print Screen
- B. Set Under Investigation
- C. Gather Endpoint detection server logs
- D. Set Log Level
- E. Get Agent Configuration
正解：A、E
質問 # 116
You have a customer who has set up a 5 GB full-size instant snapshot volume on one of his file servers. The data replicated into the snapshot is a combination of code and content elements, which serves as a rapid recovery mechanism in case of a corruption in a new build installed on the server. The customer tells you that the snapshot is working correctly, but that the time it takes to refresh the snapshot is unusually longer than expected. The customer is expecting you to resolve this problem. How should you resolve this problem?
- A. Use "vxsnap prepare" on the source volume, then remove and recreate the snapshot
- B. Recreate the snapshot as a space-optimized instant snapshot
- C. Recreate the snapshot as a traditional third-mirror break-off snapshot
- D. Use vxassist addlog logtype=dco to enable FastResync on the volume
正解：A
質問 # 117
You move a set of files from a VxFS file system to another file system. When the files are moved, the extent attributes are not moved along with the files and are lost during the migration. What could be a possible cause for this problem?
- A. There is a variation in the block size of source and target VxFS file system.
- B. The target VxFS file system does not have enough free space to accommodate the extent attributes.
- C. The target file system is not a VxFS type file system.
- D. The target VxFS file system uses mixed block size.
正解：C
質問 # 118
When you are working on Veritas Storage Foundation for Oracle, the vxdbd daemon reports an error: "VXDBA_PRODUCT exec_remote ERROR V-81-7700 Can not connect to the vxdbd". You must resolve this error with minimum administrative effort. What should you do? (Each correct answer presents part of the solution. Select two.)
- A. Restart the vxdbd daemon.
- B. Restart the Veritas Storage Foundation for Oracle server.
- C. Define a HOME directory for the vxdbd daemon.
- D. Change the port of VXDBD_SOCKET and restart the vxdbd daemon.
正解：A、D
質問 # 119
You have installed all the features for Storage Foundation for DB2. On the VxFS file system, you execute a command /opt/VRTS/bin/qiomkfile -s 500m /db01/dbfile. What will be the outcome of this command?
- A. The command will create a concurrent I/O capable file.
- B. The command will resize a Quick I/O file to 500 MB.
- C. The command will terminate without providing any result.
- D. The command will create a 500 MB Quick I/O capable file.
正解：D
質問 # 120
......
100%合格率リアル250-587試験成功を掴み取れ：https://www.passtest.jp/Symantec/250-587-shiken.html
プレミアム良質なSymantec 250-587オンライン問題集：https://drive.google.com/open?id=100ysA6TBy1klLWdyXuiLb8oa65CHoF9W