オンライン問題で最適な1z0-1045-22試験練習問題（最新の72問題)
練習問題1z0-1045-22素晴らしい練習用のOracle Warehouse Management Cloud 2022 Implementation Professionalテスト問題
Oracle 1z0-1045-22認定試験に合格した成功した候補者は、Oracle Warehouse Management Cloud 2022 Implementation Professionalsとして認定されます。この認定試験に合格することは、個人がプロの環境でOracle Warehouse Management Cloud 2022を正常に実装および管理するために必要なスキルと知識を持っていることを示します。
Oracle 1z0-1045-22試験は、Oracle Warehouse Management Cloudソリューションを実装することに興味がある専門家にとって必要不可欠な認定です。この試験は、Oracle Warehouse Management Cloudの実装に関連するさまざまな分野における候補者のスキルと知識をテストするよう設計されています。この認定を取得することは、候補者のこの分野における専門知識を証明し、クラウドコンピューティングのキャリアを発展させるのに役立ちます。
Oracle 1z0-1045-22は、Oracle Warehouse Management Cloud 2022を実装することに関心がある専門家のために設計された認定試験です。この試験は、候補者が倉庫管理システムを構成および実装し、在庫を管理し、出荷と受け取りの操作を実行し、倉庫のパフォーマンスを監視する能力を評価します。この試験は、Oracle Warehouse Management Cloudソリューションを潜在的な雇用主に実装する能力を示したい専門家に最適です。
質問 # 15
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
For active Location P20A100
Minimum Volume = 20
Max Volume = 100
Percentage of Max = 20%
Length = 20, Width = 40, Height = 60
If location P20A100 total volume goes below 20, the location is triggered for replenishment
- A. Percentage of Max
- B. Reactive
- C. Minimum Capacity
- D. Order Based
正解：A
質問 # 16
Select the two routing configurations that are used to specify routes for outbound loads. (Choose two.)
- A. the Routing Mode on the Wave Template
- B. the Routing Mode on the Carrier UI Screen
- C. the Routing_Mode parameter on the Loading RF Transaction
- D. the company parameter PACKING_ROUTING_MODE
正解：A、D
質問 # 17
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- B. The Replenishment template is required to replenish Cross Dock Order
- C. Wave template should be configured to allocate Cross Dock Order
- D. IB Shipment Type should be defined for Cross Dock ASN
- E. The Cross Dock Outbound Order type should be defined
正解：B、D
質問 # 18
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Suppress Duplicate Values icon.
- B. Select the Hid Common Values icon.
- C. Select Chart Wizard, and delete repeated values.
- D. Select the Hide Repeated Values icon.
正解：C
質問 # 19
Identify two correct statements about ASN creation. (Choose two.)
- A. Oracle WMS Cloud only allows creation of a single ASN from a PO.
- B. Oracle WMS Cloud allows creation of a single/multiple ASN from a PO.
- C. The ASN number can be system generated or manually entered.
- D. The ASN number is always auto-generated from a sequence number.
正解：B、C
質問 # 20
Identify two correct statements about the type of receiving supported by Oracle WMS Cloud. (Choose two.)
- A. If the trailer contains multiple ASNs, IB Loads can be used to consolidate then into a single record.
- B. Oracle WMS Cloud does not allow assigning multiple ASNs to a load.
- C. Receive by ASN (RF-Text: Recv LPN Shipment) allows receiving multiple ASNs.
- D. Receive by load (RF-Text: Recv LPN Load) allows receiving multiple ASNs.
正解：C、D
解説：
Receiving
There are two main types of receiving in Oracle WMS Cloud:
* Receive by ASN (RF-Text: Recv {lpn} Shipment)
* Receive by Load (RF-Text: Recv {lpn} Load)
質問 # 21
Why is it necessary to have a consolidation location?
- A. Consolidation locations are used to consolidate orders for a wave.
- B. Packing using a Distribution transaction requires a consolidation location for each store.
- C. It is necessary if you want to consolidate while packing.
- D. After you are finished picking your pick cart, you use a consolidation location to pack.
正解：B
解説：
Consolidate and Distribute: This distribution mod allows you to pick allocation from Reserve or Active.
Consolidate and Distribute only allows you to pick units, packs, or cases from the Allocation UOM dropdown.
Note: This option allows you to pick inventories for multiple stores to a temporary LPN, place it in a consolidated location, and distribute inventories based on the stores.
質問 # 22
What happens behind the flag Only deallocate on Short in the order type screen?
- A. When the parameter is set to Yes, the short pick will cancel the shorted order line automatically and
- B. When the parameter is set to Yes, then only the shorted quantity will get deallocated form the order.
- C. The Order Type has no impact on the Picking Process.
- D. When the parameter is set to YES, during short pick, the system will put the order hold status until more inventory is available.
- E. When the parameter is set to No, the shorted quantity on the order remains in the "allocated" status.
正解：B
解説：
inventory adjustment will be generated for the item.
Explanation:
Only Deallocate on Short
If allocated inventory is not physically available to completely fulfill an order, the missing inventory quantity will be short picked. The order is fulfilled with only the available inventory quantity. If an order is short picked:
When this flag = YES, the shorted quantity is only deallocated from the order.
When this flag = NO, the shorted quantity is cancelled from the order.
質問 # 23
Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)
- A. Use Custom Field in Vendor UI to map the item that needs to be sorted.
- B. The Locations Size type should be defined for each Receive Station Location.
- C. Putaway Type should be configured for the SKU.
- D. Receive Station Location for Sorting should be created and mapped with the Sorting Rule.
- E. Break Rule with Criteria needs to be set for the Sorting Rule.
- F. An IB Shipment Type should be created to receive Purchase Order with sort SKUs.
正解：A、C、F
質問 # 24
Identify three valid statements related to IB Sorting. (Choose three.)
- A. IB Sorting will group SKUs with different Putaway type and build in a single pallet
- B. IB Sorting can be done by Manual and System driven method
- C. IB Sorting is done before Putaway
- D. IB Sorting is done based on Putaway Priority.
- E. IB Sorting is done after Putaway
正解：A、B、D
質問 # 25
What is the primary purpose of the Wave Template Search Screen?
- A. to determine from which part of the warehouse the inventory will be allocated
- B. to determine how many picking tasks will be waved for picking
- C. to identify all outbound loads that have not completed picking yet
- D. to determine which available orders will be waved for picking
- E. to determine the locked locations for inventory allocation
正解：B
質問 # 26
During which of the following three scenarios does the WMS validate or throw an error message during picking with a serial number tracking execution? (Choose three.)
- A. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is present for a different facility.
- B. When the scanned serial number is present in the scanned IB LPN or active location and also exists for another item in stock in the current facility.
- C. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is currently linked to another Inventory Record for the facility.
- D. When the same serial number, which is already present on the same Sku in a different facility, is scanned.
- E. When the scanned serial number, which is associated with an OBLPN in shipped status for a different facility, is not found for the current facility.
正解：A、B、D
質問 # 27
The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning, 10% Over Receipt Warning, and 20% Over Receipt error.
Which two statements match the condition set if the ASN Qty is 100? (Choose two.)
- A. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
- B. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
- C. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
- D. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
- E. When the Operator receives 101, the RF screen displays an Over receipt warning message.
正解：C、D
質問 # 28
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Suppress Duplicate Values icon.
- B. Select Chart Wizard, and delete repeated values.
- C. Select the Hid Common Values icon.
- D. Select the Hide Repeated Values icon.
正解：A
質問 # 29
Consider that in your company you are handling lot number tracking of items.
Which two statements are true regarding lot management? (Choose two.)
- A. A received IBLPN can have multiple lot number-tracked SKUs with different lot number inventory at any point of time.
- B. After performing the Putaway of an IB LPN, which is having the lot number, the lot number will not be transferred to the Active location.
- C. Once can allocate the Inventory against the lot number during waving against an Outbound Order.
- D. A batch number in the Batch Management UI has to be always linked to an expiry date.
正解：A、C
質問 # 30
The above diagram shows a typical Third Party Logistics (3PL) structure.
Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1st in sequence).
- A. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
- B. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1
- C. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4
- D. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
正解：B
質問 # 31
The customer wants to change the items and quantities on an existing order in the WMS Cloud.
Identify the method they can use to achieve this.
- A. The customer may change the items on the Order in the UI at any order status.
- B. Once the order is Shipped Confirmed, the customer may adjust the items and quantities via their maps.
- C. The order cannot be changed and must be processes as is.
- D. The customer may send a "Cancel Order" transaction via integration just before the order is shipped.
- E. The customer may send a replacement order by sending a new order and referencing the original order in the "Order Number to Replace" field prior to shipping of the original order.
正解：E
質問 # 32
When the Ship Load interface is generated, which statement is false?
- A. The Wave is set to "Completed" status
- B. The shipping cartons (OBLPNs) assigned to the load are updated to "Shipped" status
- C. The Load is updated to "Shipped" status
- D. The Orders on the load are updated to "Shipped" status
正解：D
質問 # 33
Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving.
Which parameter must be set in the Receiving RF screen to meet this requirement?
- A. Set Mode as Blind-ASN Receiving.
- B. Set rch-sku-not-on-shmnt to "Promt for catch wt".
- C. Set Capture-catch-weight as "Prompt for catch wt".
- D. Set Single-Sku-management as Assume Single SKU.
- E. Set Blind-License Plate Number-receive-mode as by SKU scan.
正解：A
質問 # 34
In which two ways can you execute the detail cycle count of LPN Detail by sku scan? (Choose two.)
- A. using "Cycle count for LPN deffered/immediate updates" with screen parameter sku scan mode set to "By Sku Scan"
- B. using "Cycle Cnt" screen with screen parameter content-count set to "Null"
- C. using "Cycle Cnt" screen with screen parameter content-count set to "sku-scan"
- D. using "Resv Nbr Cnt" screen and with screen parameter content-count set to "sku-scan"
正解：A、B
質問 # 35
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create a Flow Through process and configure each customer's address as a "Designation Location"
- B. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
- C. Change the Order Type to "Rush" and wave it because the customer is waiting.
- D. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- E. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
正解：D
解説：
sequence.
質問 # 36
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- B. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
- C. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- D. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- E. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
正解：A
質問 # 37
Both Item A and item B are batch-tracked items. Your customer has been using both the IBLPNs UI screen and the Batch Management UI screen to manage batch-tracked inventory.
Your customer only has reserve locations for storage and doesn't use systematic ASN verification process in WMS Cloud. There are two records in the Batch Management UI screen of tem A and item B respectively, and these two records have the same value in the Batch Number field.
In the Batch Management UI screen, when you select the record of item A and apply a lock code, which two statements are true? (Choose two.)
- A. Inventory History record 22 - Lock Container - Before ASN Verification will be generated
- B. This lock code will appear in the Number Locks hyperlink in the IBLPNs UI scree for all the IBLPNs of item A with this batch number.
- C. Inventory History record 23 - Lock Container - After ASN Verification will be generated
- D. This lock code will be applied to the record of item B automatically in the Batch Management UI screen.
- E. This lock code will appear in the Batch Nbr Lock field in the IBLPNs UI screen for all the IBLPNs of item a with this batch number.
正解：C、E
質問 # 38
......
リアルな1z0-1045-22試験別格な練習試験問題：https://www.passtest.jp/Oracle/1z0-1045-22-shiken.html
100%合格率でリアルな1z0-1045-22試験成功ゲット：https://drive.google.com/open?id=12ymqlBwEL0F4Ij0Fy0Y-vsN_86yYgmyW