リアルなAPI-510最新試験PassTest 2024年最新ののAPI-510練習テスト問題集を提供しています
全問API-510問題集でandPressure Vessel Inspectorトレーニングコース受験生を学習してパスさせるPressure Vessel Inspector試験無料問題集！
質問 # 85
When must both an internal and external inspection always be performed?
- A. whenever the vessel's ownership and location changes
- B. whenever the vessel's ownership changes
- C. whenever there is a change in fluid service
- D. at installation of vessel
正解：A
質問 # 86
One of the steps when rerating a pressure vessel is the documentation of the:
- A. Approval of the ASME
- B. Report from an external professional engineer
- C. Approval of the operation's engineering department
- D. Calculations from the manufacturer or the owner-user's engineer
正解：D
質問 # 87
Which API standard is specifically mentioned within API-510 for corrosion and materials expertise?
- A. API 580
- B. API 571
- C. API 570
- D. API 579
正解：B
質問 # 88
When a corroded area of considerable size is encountered and the circumferential stresses govern, what is maximum length over which the thickness can be averaged for a vessel with an inside diameter of 48 inches?
- A. 24 inches
- B. 20 inches
- C. 20 percent of the vessel diameter
- D. 25 percent of the vessel diameter
正解：B
質問 # 89
Describe the training requirements for new inspectors under API-510.
正解：
解説：
New inspectors under API-510 are required to undergo comprehensive training that covers all aspects of pressure vessel inspection, including theoretical knowledge of materials science and the practical application of inspection techniques. The training must include a detailed study of the API-510 code, hands-on experience with non-destructive testing methods, and familiarity with documentation and compliance procedures. Additionally, inspectors must pass a certification exam and participate in continuing education to maintain their certification and stay updated with industry developments.
質問 # 90
Which documentation is not required by API-510 for pressure vessels undergoing major repairs?
- A. A record of previous repairs and inspections
- B. Updated as-built drawings
- C. A detailed repair plan approved by an authorized inspector
- D. Certification of compliance from the original equipment manufacturer
正解：D
質問 # 91
Discuss the strategies for implementing API-510 standards in a multinational corporation with diverse operational environments.
正解：
解説：
Implementing API-510 standards in a multinational corporation requires a centralized strategy tailored to diverse operational environments. This strategy should include developing a corporate-wide policy that integrates API-510 standards with local regulations and operational practices. Training programs should be adapted to the specific needs and languages of different regions, and a robust internal audit system should be established to ensure compliance across all locations. Leveraging technology for remote training and inspections can also help standardize practices across diverse environments. Additionally, fostering a culture of safety and compliance through leadership commitment and employee engagement is crucial for successful implementation.
質問 # 92
Under API-510, when is a pressure vessel subject to mandatory stress relieving?
- A. After every major repair
- B. When the thickness of the vessel is reduced by 10%
- C. After any repair
- D. After alterations that involve cutting or welding on critical areas
正解：D
質問 # 93
What two conditions should be considered in selecting the techniques(s) to be used for the inspection of a pressure vessel?
- A. The condition of the vessel and the recommendations described by NBIC
- B. The condition of the vessel and the recommendations of the repair organization
- C. The condition of the vessel and the environment in which the vessel operates
- D. The recommendation of the repair organization and the environment in which the vessel operates
正解：C
質問 # 94
Describe the process for re-certifying a pressure vessel that has been out of service for an extended period according to API-510.
正解：
解説：
Re-certifying a pressure vessel that has been out of service according to API-510 involves a comprehensive inspection and testing process to ensure it meets all current safety standards before being returned to service. This includes a complete internal and external visual inspection, thickness measurements to check for corrosion or erosion, and non-destructive testing to detect any defects.
Additionally, a hydrostatic or pneumatic test must be conducted to verify the integrity of the pressure boundaries. Any issues identified must be repaired, and the vessel must comply with the current versions of the API-510 code before re-certification can be completed.
質問 # 95
According to API-510, the acceptance criteria for a welded repair must be in accordance with which of the following?
- A. The original code of construction
- B. The discretion of the inspecting engineer
- C. The latest edition of the ASME code
- D. Any internationally recognized welding standard
正解：A
質問 # 96
An on-stream inspection can NOT be substituted for an internal inspection unless the remaining life exceeds:
- A. 4 years
- B. 10 years
- C. 5 years
- D. 2 years
正解：B
質問 # 97
What is the maximum allowable working pressure (MAWP) recalculated after a significant repair?
- A. After each repair
- B. Biannually
- C. Every five years
- D. Annually
正解：A
質問 # 98
As per API 510, what is the maximum allowed time between the testing of pressure relieving devices?
- A. Pressure relief devices must be tested at every shutdown
- B. 10 years
- C. 5 years
- D. Pressure relief valves shall be tested at intervals that are frequent enough to verify that the valves perform reliably
正解：B
質問 # 99
What is the API-510 required minimum thickness for ultrasonic testing on a pressure vessel's shell?
- A. 0.375 inches
- B. 0.25 inches
- C. 0.1 inches
- D. 0.05 inches
正解：B
質問 # 100
Under API-510, how often must the qualifications of a pressure vessel inspector be revalidated through testing or continuing education?
- A. Every 3 years
- B. Every 6 years
- C. Every 10 years
- D. Every 5 years
正解：A
質問 # 101
......
有効な学習方法でAPIのAPI-510試験をパス：https://www.passtest.jp/API/API-510-shiken.html
無料テストエンジンPressure Vessel Inspector認定試験：https://drive.google.com/open?id=1dmURZt49dh9-c2LYDkU416wYFGl-rmgm