リリースISQI CTAL-TAE更新された問題PDF [Q23-Q38]

Share

リリースISQI CTAL-TAE更新された問題PDF

CTAL-TAE問題集と練習テスト（41試験問題)


ISTQB Certified Tester Advanced Level、Test Automation Engineering認定試験は、テスト自動化に特化したソフトウェアテスターにとって貴重な資格です。CTAL-TAE試験に合格することは、テスターが効果的に自動化テストを設計、実装、および維持するために必要な知識とスキルを持っていることを示しています。この認定は、テスターがソフトウェアテスト分野でキャリアを進め、最新のテスト自動化ツールと技術に常にアップデートされるための優れた方法です。


ISQI CTAL-TAE試験は、ソフトウェアテストの分野で非常に求められる認証資格です。この試験は、すでにISTQB認定テスターFoundation LevelおよびISTQB認定テスターAdvanced Levelを取得しており、テスト自動化エンジニアリングに特化したいソフトウェアテスターを対象として設計されています。試験では、テスト自動化の原則の理解と、自動化されたテストスイートの設計、実装、およびメンテナンスの能力が求められます。

 

質問 # 23
Consider a TAS associated to dynamically changing software frequent releases. Your goal is to determine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?

  • A. The number of automated tests requiring maintenance, for each new release of the SUT.
  • B. The time it takes to execute all the automated tests, for each new release of the SUT.
  • C. The number of automated tests which fail because of a single software defect, for each new release of the SUT
  • D. The code coverage achieved with the automated tests, for each new release of the SUT

正解：C


質問 # 24
As a TAE you are evaluating a functional test automation tool that will be for several projects within yourorganization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in
* different environments?
* Does the test automation tool support a licensing scheme that allows accessing different sets?
* Does the testautomation tool have a large feature set, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?

  • A. B and E
  • B. A and C
  • C. C and D
  • D. A and E

正解：A


質問 # 25
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?

  • A. The defect density in the automation code of the regression test suite.
  • B. The ratio of comments to executable statements in the SUT code.
  • C. The ratio of commands to executable statements in the automation code of the regression test suite
  • D. The SUT code coverage provided by the execution of the regression test suite.

正解：A


質問 # 26
Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?

  • A. Verify the behavior of the whole automated test suite by running all the automated tests
  • B. Do not run any tests because you can immediately confirm the correct functioning of the automated test suite
  • C. Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify itsbehavior
  • D. Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.

正解：D


質問 # 27
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?

  • A. It allows testers to findmore defects on the SUT
  • B. It allows specify test cases without being closely tied to the tool to run them against the SUT
  • C. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
  • D. It allows developing steps of the test process without being closely tied to the SUT interface.

正解：B


質問 # 28
Consider a TAS that exclusively uses the APIs of a SUT. To make this work, significant changes have been required to the SUT by adding a set of dedicated test interfaces to the APIs. All the automated tests will use these test interfaces when interacting with the SUT. Assume that you are currently verifying the correctness of the automated test environment and test tool setup.
Which of the following would you expect to be the MOST specific risk associated with this scenario?

  • A. The process of configuring the TAS will be error-phone due to manual intervention
  • B. The connectivity from the TAS to the dedicated test interfaces will not work
  • C. False alarms, that are unlikely to occur in the real world, will be observed during testing
  • D. The automated test cases will not contain the expected result

正解：B


質問 # 29
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?

  • A. The ability of the SUT to prevent unauthorized access to its components or data.
  • B. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
  • C. The ability to identify states, outputs, intermediate result and error messages in the SUT
  • D. The ability of the SUT to perform its intended function for a specified period of time

正解：D


質問 # 30
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?

  • A. A and B are both internal TAS metrics
  • B. A is an internal TAS metric and B is an external TAS metric
  • C. A and b are both external TAS metric
  • D. A is and external TAS metric and b is an internal TAS metric

正解：A


質問 # 31
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUTenvironment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?

  • A. Checking whether the loading of the TAS is repeatable in the SUT environment
  • B. Checking whether all the test cases contain the expected results
  • C. Checking whether all the test cases produce repeatable outcomes
  • D. Checking whether the post condition have been fulfilled for all the test cases

正解：C


質問 # 32
You have been asked todeterminea TAS for a new release of a SUT, test should be automatedwherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?

  • A. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
  • B. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
  • C. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
  • D. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.

正解：A、D


質問 # 33
Which of the following is NOT a technical design consideration for a TAA?

  • A. Availability of interfaces for the SUT to be testable
  • B. Standards and Legal requirements, e.g data privacy
  • C. Data used by the SUT, e.g configuration, users
  • D. The number of users for the SUT

正解：D


質問 # 34
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?

  • A. Summary of the test execution results
  • B. System/Application under test and its version
  • C. Environment in which the tests have been executed
  • D. Defect clusters identified during test execution

正解：A


質問 # 35
Consider a TAS that exclusively uses the APIs of a SUT. To make this work, significant changes have been required to the SUT by adding a set of dedicated test interfaces to the APIs. All the automated tests will use these test interfaces when interacting with the SUT. Assume that you are currently verifying the correctness of the automated test environment and test tool setup.
Which of the following would you expect to be the MOST specific risk associated with this scenario?

  • A. False alarms, that are unlikely to occur inthe real world, will be observed during testing
  • B. The process of configuring the TAS will be error-phone due to manual intervention
  • C. The automated test cases will not contain the expected result
  • D. The connectivityfrom the TAS to the dedicated test interfaces will not work

正解：A


質問 # 36
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the
11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?

  • A. Re-run the test automation suite starting from the 1sttest.
  • B. Re-run the test automation suite starting from the 12thtest
  • C. Take a backup of the database in its current state. So It can be analyzed later
  • D. Return the database to a consistent state that allows subsequent test to run

正解：C


質問 # 37
Consider thefollowing example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?

  • A. A is an internal TAS metric and B is an external TAS metric
  • B. A and B are both internal TAS metrics
  • C. A is and external TAS metric and b is an internal TAS metric
  • D. A and b are both external TAS metric

正解：C


質問 # 38
......


ISQI CTAL-TAEの認定を取得することは、個人のテスト自動化エンジニアリングの能力と、効果的かつ効率的な自動化テストプロセスの開発に貢献する能力を示すものです。この認定は、ソフトウェアテスト産業において雇用者に高く評価され、プロフェッショナルに新しいキャリアの機会を提供することができます。さらに、この認定は生涯有効であり、取得後に更新要件や継続的な費用が発生することはありません。

 

CTAL-TAE試験問題集合格させるのは更新されたのは2023年年最新の認証済み試験問題：https://www.passtest.jp/ISQI/CTAL-TAE-shiken.html

ガイド（2023年最新）実際のISQI CTAL-TAE試験問題：https://drive.google.com/open?id=11Kvle90gH27MhYE1PqdCvJWbpsx3xt2n

関するブログ

もっと
CTAL-TAE 無料問題集