問題集を購入するなら最新の2025年04月24日 C_IBP_2311試験問題と解答PDFで一年間無料更新 [Q43-Q67]

問題集を購入するなら最新の2025年04月24日 C_IBP_2311試験問題と解答PDFで一年間無料更新

時間限定無料ダウンロード！最新のC_IBP_2311問題集で2025年最新のC_IBP_2311試験問題

質問 # 43
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: Thereare 2 correct answers to this question.

A. You can only apply one value-based filter per planning view.
B. The alerts dashboard is not available if a value-based filter is set for the open planning view
C. These filters can be used together with attributes totals in the same planning view
D. You can add (or delete) planning objects to a planning view after these filters are applied

正解：C、D

質問 # 44
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand. Which solutions would apply to this scenario? Note: There are 2 correct answers to this question.

A. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs
B. Excess stock can be generated and will need to be staged in an overflow warehouse
C. Minimum capacity utilization will result in pull production
D. Capacity leveling will be possible for production and storage resources.

正解：A、B

質問 # 45
What is a prerequisite for modelling outsourced manufacturers with production capacity using the Supply Optimizer?

A. Model relative production costs across internal locations and outsourced manufacturing locations
B. Use production lead times and offsets to manage components at the outsourced manufacturing location
C. Ensure that the outsourced manufacturing locations have a separate subnetwork
D. Model target inventory and stocks at the outsourced manufacturing location

正解：A

質問 # 46
What are some of the capabilities of the Planner Workspaces app? Note: There are 2 correct answers to this question.

A. It supports simulating the effect of the changes
B. It supports sharing with other users or user groups.
C. It supports favourites created in SAP IBP, add-in for Microsoft Excel
D. It supports embedding analytic stories as a workspace component

正解：C、D

質問 # 47
Which options can be used to reduce the runtimes of a time-series optimizer run? Note: There are 3 correct answers to this question.

A. Use non-overlapping networks by using Subnetworks ID maintained at Location-Products to reduce the size of the problem
B. Split into multiple planning areas to support weekly vs. daily planning needs.
C. Eliminate the usage of telescopic time buckets
D. Increase the use of incremental lot size beyond the frozen horizon.
E. Keep the number of fairshare segments small

正解：A、C、E

質問 # 48
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct answers to this question

A. Substitute missing values in case of sporadic demands.
B. Choose time-independent key figures as segmentation measures
C. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B"
D. Identify inventory items that quire closer attentions

正解：B、D

質問 # 49
Which functional capabilities are included in SAP IBP for response and supply? Note: There are 2 correct answers to this question

A. Analyse supply Usage
B. Detailed Production Scheduling
C. Calculating buffer proposals
D. Gating Factor

正解：A、D

質問 # 50
You are working with inventory key figures. What are some of the business scenarios where you can use the Last Period Aggregation function? Note: There are 2 correct answers to this question

A. Calculating the value of inventory on on weekly basis, using static argentation from the daily 'evel
B. Calculating the value of inventory on any level from the time profile, ensuring flexibility of calculation
C. Calculating how many periods inventory is going to last based on the planned demand
D. Searching for and returning the last not-full value of the inventory key figure

正解：A、B

質問 # 51
Which Master Data Types are used in time-series-based planning within SAP IBP for response and supply? Note: There are 3 correct answers to this question

A. DS Order fulfilment
B. Product
C. Location
D. Transportation lane
E. Customer

正解：B、C、E

質問 # 52
You are modeling co-products in SAP Integrated Business Planning for Supply Chain. What are some of the properties ofco-production you need to be aware of? Note: There are 2 correct answers to this question

A. Co-production can be modelled only by supply optimizer and finite heuristics
B. The output coefficient is time-dependent and should be modeled as a time series
C. The relationship between main product and co-product is specified in the production source of supply.
D. The number of co-products that can be defined in the supply model is unlimited.

正解：C、D

質問 # 53
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question

A. Users should have authorization for template administration.
B. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel
C. Use Excel Cell reference in the report editor option is selected
D. Activate Local Member recognition settings is selected

正解：A、D

質問 # 54
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP. What are the integration toolsthat you can use with such a setup for data transfer? Note: There are 2 correct answers to this question.

A. Core Interface
B. SAP Smart data Integration
C. SAP Cloud Integration for data services
D. Real-time Integration

正解：B、C

質問 # 55
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.

A. The Total number of the attribute that can use subtotal in the planning view can be restricted
B. The values of the attribute-based total at the highest attribute level in the planning level can be - changed
C. The total value can be added before or after the selected attribute
D. Only attribute-based totals can be added to the planning view.

正解：A、C

質問 # 56
You need to create time periods for the time profile in a planning are
a. What should you be aware of when running the Create Time Periods application job?

A. It is mandatory to specify the planning area in the Parameter Section of the application job
B. The planning area to which the time profile is assigned must be active
C. This application job can also be triggered from SAP IBP, add-in for Microsoft Excel
D. A time profile has to be activated so that application job can proceed

正解：D

質問 # 57
Which of the following are features of lag-based snapshots? Note: There are 2 correct answers to this question

A. Lag-based snapshots are created in the Configuration app for a fixed time range.
B. The number of lag-based snapshots are limited to nine levels.
C. Target key figure for these snapshots are expressed to the user in planning view
D. Target key figure for these snapshots must have lag as root attribute in the base planning leve

正解：C、D

質問 # 58
You set up time-series integration using SAP Cloud Integration for data services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with the status "Fatal Error" How can you find more details about the error?

A. Download the Rejection Report in the Data Integration app
B. Navigate to the Manage Master Data app and open the Log
C. Navigate to the Master Data Workbook in Excel and open the Log.
D. Download the initial Problem report in the Data Integration app

正解：D

質問 # 59
What are the possible Master Data Maintenance options for SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question

A. The Planner Workspaces app
B. The Planning Areas Model Configuration app
C. The Manage Master Data app
D. The SAP IBP, add - in for Micorsoft Excel
E. The data Integration job app

正解：C、D、E

質問 # 60
Model configuration allows the attributes of a master data type to be assigned as key figures Which feature is relevant for this type of object?

A. This type of key figure has better performance than a time-independent key figure
B. This type of key figure is not usually stored and it cannot be s itable
C. This object contains user-defined criteria that monitor the running of business plan
D. This object usually provides a single value for a unique planning combination

正解：D

質問 # 61
Which Maintenance, Repair, and Overhaul (MRO) parts planning processes are included in SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question.

A. Supply Planning
B. Inventory Optimization
C. SAP Intelligent Asset Management
D. Demand Planning
E. Demand Driven Replenishment

正解：A、B、D

質問 # 62
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, add-infor Microsoft Excel, and you are receiving an error related to missing combinations. How can you resolve this problem? Note: There are 2 correct answers to this question

A. Use the function New Planning Object in Excel UI to create missing combination
B. Use the Manage the master data app to create missing combinations
C. Use the Data Integration app to upload the missing combinations
D. Use the Copy Operator to create the missing combinations

正解：A、C

質問 # 63
What is the feature of the weighted average key figure calculation?

A. The numerator's value should include multiplication by the weight.
B. Attributes can be used in weighted average key figure calculation
C. The first parameter of the formula acts as a weight
D. The numerator of the calculation should be stored.

正解：A

質問 # 64
Which sourcing methods are required to identify the product flow through the network? Note:
There are 3 correct answers to this question.

A. Customer sourcing Rule
B. Sourcing via Production
C. Sorucing via Costs
D. Sourcing via Demand Prioritization
E. Unspecified Sourcing

正解：A、B、C

質問 # 65
Manage Analytics Stories introduces advanced visualization features within SAP Integrated Business Planning for Supply Chain. What are some of the main capabilities of the stories? Note: There are 3 correct answers to this question.

A. Specific chart and table filters can be applied within the story
B. The story is structured around one responsive page
C. Stories must be re-created in each SAP IBP environment.
D. Links to the external URLs can be embedded in the story.

正解：A、C、D

質問 # 66
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned? Note: There are 2 correct answers to this question.

A. Created as type INTEGER and assigned to an compound master data type
B. Created as type DECIMAL and assigned to an compound master data type
C. Created as type DECIMAL and assigned to an external master data type
D. Created as type INTEGER and assigned to a simple master data type

正解：B、D

質問 # 67
......

SAP C_IBP_2311 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Planning Operators & Application Jobs: In this section of the exam, topics covered include how to configure and utilize Planning Operators to automate procedures in the planning framework.
トピック 2	Key Figures & Attributes: In this section of the exam, the topics covered include creating and utilizing key figures and attributes to model the supply chain.
トピック 3	Analytics and Reporting: In this section of the exam, the focus is given to how to define and view information with user-defined charts and dashboards.
トピック 4	Model Supply Processes: In this section, the topics covered include how to configure supply planning and how to run various solvers to generate planning results.
トピック 5	General Configuration of a Planning Area: This section covers topics such as display, create, copy, edit, check, and how to activate a planning area.
トピック 6	Model Sales & Operations Processes: In this section of the exam, the topics include how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans.
トピック 7	User Interface: This section of the exam covers using the Fiori Launchpad to customize the UI, and work with Excel UI.
トピック 8	Solution Architecture & Data Integration: In this section of the exam, topics are covered related to how to optimize the integration scenarios and architecture of your planning solution.

検証済みのC_IBP_2311問題集と解答で一年間無料最速更新：https://www.passtest.jp/SAP/C_IBP_2311-shiken.html

最新のSAP C_IBP_2311認定の練習テスト問題：https://drive.google.com/open?id=1Ui1hghnwCmi18Jzy2DnG2Tpn8yGi_tIo

関するブログ

もっと

C_IBP_2311 無料問題集