• ホーム
  • ブログ
  • 問題集を購入するなら最新の2025年05月24日 FCP_FAZ_AD-7.4試験問題と解答PDFで一年間無料更新 [Q67-Q83]

問題集を購入するなら最新の2025年05月24日 FCP_FAZ_AD-7.4試験問題と解答PDFで一年間無料更新 [Q67-Q83]

Share

問題集を購入するなら最新の2025年05月24日 FCP_FAZ_AD-7.4試験問題と解答PDFで一年間無料更新

時間限定無料ダウンロード！最新のFCP_FAZ_AD-7.4問題集で2025年最新のFCP_FAZ_AD-7.4試験問題


Fortinet FCP_FAZ_AD-7.4 認定試験の出題範囲：

トピック出題範囲
トピック 1
  • System Configuration: This section assesses the capabilities of network and security analysts in managing FortiAnalyzer systems. It includes tasks like performing initial configurations, setting up high-availability systems, and configuring RAID for storage.
トピック 2
  • Logs and Reports Management: This part of the exam measures the candidate's ability to handle log data and generate reports using FortiAnalyzer. Network and security analysts must show proficiency in managing, analyzing, and reviewing logs to ensure effective system monitoring and auditing processes are in place.
トピック 3
  • Device Management: Here, Fortinet network and security analysts are evaluated on their ability to handle devices linked to FortiAnalyzer. This includes adding new devices, managing them efficiently, and troubleshooting communication issues.
トピック 4
  • Administration: This section evaluates the ability of network and security analysts to configure administrative access and manage Administrative Domains (ADOMs). It covers tasks such as setting user permissions, managing backups, and disk quotas, and ensuring secure and efficient management of administrative privileges within FortiAnalyzer systems.

 

質問 # 67
Which two purposes does the auto cache setting on reports serve? (Choose two.)

  • A. It provides diagnostics on report generation time.
  • B. It automatically updates the hcache when new logs arrive.
  • C. It reduces report generation time.
  • D. It reduces the log insert lag rate.

正解：B、C

解説：
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache


質問 # 68
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)

  • A. IPsec cannot be enabled if SSL is enabled as well.
  • B. IPsec is only enabled through the CLI on FortiAnalyzer.
  • C. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
  • D. Must establish an IPsec tunnel ID and pre-shared key.

正解：B、D

解説：
Option B is correct because you must establish an IPsec tunnel ID and pre-shared key to secure the communication between FortiAnalyzer and FortiGate with IPsec12. The tunnel ID is a unique identifier for each tunnel and the pre-shared key is a secret passphrase that authenticates the peers.
Option D is correct because IPsec is only enabled through the CLI on FortiAnalyzer1. You cannot configure IPsec settings through the GUI on FortiAnalyzer.


質問 # 69
Which daemon is responsible for enforcing the log file size?

  • A. miglogd
  • B. ofrpd
  • C. sqlplugind
  • D. logfiled

正解：D

解説：
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 121: The logfiled process enforces the log file size and is also responsible for disk quota enforcement by monitoring the other processes.


質問 # 70
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)

  • A. When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.
  • B. By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting
  • C. When in collector mode. FortiAnalyzer supports event management and reporting features.
  • D. Collector mode is the default operating mode.

正解：A、B

解説：
Reference:
https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/312644/analyzer-collector-collaboration


質問 # 71
Refer to the exhibit, which shows the HA configuration settings of a FortiAnalyzer device.

The administrator wants to join this FortiAnalyzer to an existing HA cluster. What can you conclude from the configuration displayed?

  • A. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.
  • B. After joining the cluster, this FortiAnalyzer will forward received logs to its peers.
  • C. This FortiAnalyzer will join the existing HA cluster as the secondary.
  • D. This FortiAnalyzer is configured to route HA traffic through a gateway.

正解：C

解説：
page 138 of the FortiAnalyzer 7.4 Admin Study Guide. If there is an existing primary device, then this device becomes a secondary device. The default role is Secondary, so that the device can synchronize with the primary device. A secondary device cannot become a primary device unit it is synchronized with the current primary device.


質問 # 72
Refer to the exhibit.

What is the purpose of configuring FortiAnalyzer with the settings displayed in the image?

  • A. To improve security
  • B. To maximize resiliency
  • C. To increase reliability
  • D. To expand bandwidth

正解：A

解説：
The settings displayed in the image show the creation of a VLAN interface on FortiAnalyzer. The VLAN ID is set to 100, and it is associated with port 5.
The purpose of configuring a VLAN interface like this is generally: To improve security.
By creating a VLAN, traffic can be segmented into isolated networks, which helps limit access and enhances security by reducing the broadcast domain and keeping different types of traffic (e.g., management, user, and data traffic) separate.


質問 # 73
Which statement describes a dataset in FortiAnalyzer?

  • A. They define the chart types to be used in reports.
  • B. They determine what data is retrieved from the database.
  • C. They provide the layout used for reports.
  • D. They are used to set the data included in templates.

正解：B


質問 # 74
How can you attach a report to an incident?

  • A. By editing the settings of the desired report
  • B. From the properties of an existing incident
  • C. By attaching it to an event handler alert
  • D. Saving it in JSON format, and then importing it

正解：B


質問 # 75
Refer to the exhibit.

What does the data point at 12:20 indicate?

  • A. FortiAnalyzer is using its cache to avoid dropping logs.
  • B. The log insert lag time is increasing.
  • C. The sqlplugind service is caught up with new logs.
  • D. The performance of FortiAnalyzer is below the baseline.

正解：C


質問 # 76
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)

  • A. System information
  • B. Logs from registered devices
  • C. Database snapshot
  • D. Report information

正解：A、D

解説：
A FortiAnalyzer system backup includes configurations, report settings, and system information, but it does not include logs from registered devices or database snapshots. Logs are stored separately and are not part of the system configuration backup.


質問 # 77
Which statement correctly describes RAID 10 (1+0) on FortiAnalyzer?

  • A. A configuration with four disks, each with 2 TB of capacity, provides a total space of 2 TB.
  • B. It uses striping to provide performance and fault tolerance.
  • C. A configuration with four disks, each with 2 TB of capacity, provides a total space of 4 TB.
    B 11 combines mirroring striping and distributed parity to provide performance and fault tolerance

正解：C

解説：
RAID 10 combines mirroring (RAID 1) and striping (RAID 0). In a RAID 10 setup with four disks, data is mirrored across two pairs of disks, and those pairs are striped for performance. This results in improved performance and fault tolerance, but the total usable storage is 50% of the total raw storage, meaning four 2 TB disks provide 4 TB of usable space.


質問 # 78
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?

  • A. Custom View
  • B. Chart Builder
  • C. Dataset Library
  • D. Export to Report Chart

正解：D


質問 # 79
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)

  • A. Disk size
  • B. License type
  • C. Total quota
  • D. RAID level

正解：A、D

解説：
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation


質問 # 80
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?

  • A. FortiView
  • B. Fabric View
  • C. System Settings
  • D. Log View

正解：A

解説：
Log View in FortiAnalyzer records all logs related to system and user activities, including any changes made by administrators. It would show entries related to any unauthorized access or modifications done by a rogue administrator.


質問 # 81
Which statement is true when you are upgrading the firmware on an HA cluster made up of two FortiAnalyzer devices?

  • A. You can perform the firmware upgrade using only a console connection.
  • B. Both FortiAnalyzer devices will be upgraded at the same time.
  • C. You can enable uninterruptible-upgrade so that the normal FortiAnalyzer operations are not interrupted while the cluster firmware upgrades.
  • D. First, upgrade the secondary device, and then upgrade the primary device.

正解：D

解説：
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 64: To upgrade FortiAnalyzer HA cluster firmware:
1. Log in to each secondary device.
2. Upgrade the firmware of all secondary devices.
3. Wait for the upgrades to complete and verify that all secondary devices joined the cluster.
4. Verify that logs on all secondary devices are synchronized with the primary device.
5. Upgrade the primary device.
https://docs.fortinet.com/document/fortianalyzer/7.2.0/upgrade-guide/262607/upgrading-fortianalyzer-firmware


質問 # 82
Refer to the exhibit.

The exhibit shows the creation of a new administrator on FortiAnalyzer. The new account uses the credentials stored on an LDAP server.
Why would an administrator configure a password for this account?

  • A. This password is set to comply with FortiAnalvzer password policy
  • B. This password is used if the authentication server becomes unreachable.
  • C. This password authenticates FortiAnalyzer aqainst the LDAP server.
  • D. This password is required because this is a restricted user.

正解：B

解説：
When using LDAP for authentication, a password can be set locally on FortiAnalyzer as a fallback option in case the LDAP server becomes unreachable. This ensures that the administrator can still log in if there are issues with the LDAP server.


質問 # 83
......

検証済みのFCP_FAZ_AD-7.4問題集と解答で一年間無料最速更新：https://www.passtest.jp/Fortinet/FCP_FAZ_AD-7.4-shiken.html

最新のFortinet FCP_FAZ_AD-7.4認定の練習テスト問題：https://drive.google.com/open?id=1M4xpLN3Z8oah-rcKDbp4hoxqi1Z7vd3W

関するブログ

もっと
FCP_FAZ_AD-7.4 無料問題集