実践サンプルと問題集と指導には2024年最新のNCP-CI-Azure有効なテスト問題集
最新 [2024年11月06日] 100%合格率保証付きの素晴らしいNCP-CI-Azure試験問題PDF
質問 # 23
A company wants to start using Nutanix Cloud Clusters (NC2) in Azure. The company has large spend commitments as part of a Microsoft Azure Consumption Commitment (MACC) totaling $15 million.
What approach should the administrator take to ensure the Nutanix licensing costs apply to the MACC?
- A. Purchase Nutanix licenses directly from Nutanix and contact Microsoft support.
- B. Leverage existing Nutanix licenses
- C. Purchase Nutanix licenses through the Azure Marketplace.
- D. Request a trial directly from Nutanix.
正解：C
解説：
* Microsoft Azure Consumption Commitment (MACC):To ensure that the Nutanix licensing costs apply to the MACC, the company needs to make purchases that are recognized by Azure's billing system.
* Azure Marketplace Purchases:By purchasing Nutanix licenses through the Azure Marketplace, the costs will be included in the Azure billing and count towards the MACC, thereby leveraging the committed spend.
References:
* Azure Marketplace Documentation
* Nutanix Licensing Guide
質問 # 24
An administrator wants to ensure that enough available bandwidth exits for workloads running in an NC2 on Azure cluster environment.
What is the highest number of Flew Gateway VMs that can be deployed within this environment?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
* Flow Gateway VMs: Flow Gateway VMs are used to manage and route network traffic within an NC2 on Azure cluster, ensuring sufficient bandwidth for workloads.
* Scalability: To ensure enough available bandwidth, multiple Flow Gateway VMs can be deployed.
* Maximum Limit: The highest number of Flow Gateway VMs that can be deployed within an NC2 on Azure environment is 6, providing the necessary capacity to handle high traffic volumes and ensure optimal performance.
* Conclusion: Deploying up to 6 Flow Gateway VMs ensures adequate bandwidth for NC2 workloads.
References:
* Nutanix Clusters Networking Guide
* Azure Network Performance Documentation
質問 # 25
After creating a new Nutanix User VPC, what is needed to allow traffic to flow out of the Flow gateway VM when using the NATed Path?
- A. Add a default route on the Nutanix User VPC of 0.0.0.0/0 to the External Overlay network.
- B. Edit the External Flow Gateway Security Group on the External NIC to allow outbound traffic.
- C. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- D. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- E. Edit the Internal Flow Gateway Security Group on the internal NIC to allow outbound taffic
正解：A
解説：
* NATed Path Configuration: When using the NATed Path, it is essential to ensure that traffic can flow out of the Flow gateway VM to external networks.
* Default Route: Adding a default route on the Nutanix User VPC ensures that all outbound traffic is directed to the appropriate network gateway.
* Configuration Steps:
* Navigate to the routing settings of the Nutanix User VPC.
* Add a default route with the destination of 0.0.0.0/0, pointing to the External Overlay network.
* Security Group Settings:
* Ensure that the External Flow Gateway Security Group on the External NIC allows outbound traffic.
* Ensure that the Internal Flow Gateway Security Group on the internal NIC allows outbound traffic (if needed for internal network flows).
* Conclusion: Properly configuring the default route on the Nutanix User VPC enables outbound traffic flow via the NATed Path through the External Overlay network.
References:
* Nutanix Flow Gateway Configuration Guide
* Azure VPC Routing Documentation
質問 # 26
What is the minimum number of nodes needed to deploy an RF3 NC2 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
* Replication Factor (RF3):RF3 requires that data is replicated across three different nodes to ensure data durability and fault tolerance. This replication scheme allows the system to tolerate the failure of two nodes simultaneously.
* Minimum Node Requirement for RF3:To meet the RF3 requirements while maintaining operational capability, a minimum of five nodes is necessary. This configuration ensures that there are enough nodes to distribute the data and provide the necessary redundancy.
References:
* Nutanix Replication Factor Documentation
* Nutanix NC2 on Azure Deployment Guide
質問 # 27
Which address must Azure Directory Service be able to resolve when deploying a new NC2 cluster?
- A. Apikeys.nutanix.com
- B. Gateway-internal-api-cloud.nutanix.com
- C. Gateway-external-api.cloud.nutanix.com
- D. Download.cloud.nutanix.com
正解：C
解説：
* Azure Directory Service Role: Azure Directory Service must be able to resolve specific Nutanix URLs to ensure proper communication and functionality during the deployment of an NC2 cluster.
* Critical Endpoint: The address "Gateway-external-api.cloud.nutanix.com" is critical for establishing external API communications required for the deployment and management of the NC2 cluster.
* DNS Resolution: Proper DNS resolution of this address ensures that the Azure Directory Service can interact with Nutanix services and APIs necessary for cluster operations.
* Verification Process:
* Ensure that DNS settings allow resolution of "Gateway-external-api.cloud.nutanix.com".
* Test connectivity and resolution prior to deployment to avoid issues.
* Importance: Without resolving this address, the deployment process might face connectivity issues, leading to potential deployment failures.
References:
* Nutanix NC2 on Azure Setup Guide
* Azure Active Directory Integration
質問 # 28
What action is performed in Azure when an instance is reported as being in a terminated state, but NC2 expects it to be in a running state?
- A. NC2 automatically reconnects with the instance.
- B. NC2 restarts the AHV host.
- C. NC2 alerts the administrator that a manual replacement is required.
- D. NC2 condemns the host and triggers replacement of the host.
正解：D
解説：
* Instance Termination Detection:When an instance in Azure is reported as being in a terminated state but NC2 expects it to be running, the system will automatically take corrective actions.
* Host Condemnation and Replacement:NC2 will condemn the host, marking it as unusable, and will then trigger the replacement process to ensure that the cluster maintains its required capacity and performance levels. This automatic handling ensures minimal disruption to the workloads running on the cluster.
References:
* Nutanix NC2 Automated Management Features
* Azure Instance State Documentation
質問 # 29
NC2 Azure API calls are failing and MCM no longer shows telemetry or health of the cluster.
Where should the administrator look first?
- A. SSH into the NC2 Azure CVMs
- B. Log into Prism and check alerts and notifications
- C. Check whitelisting of Outbound Communication
- D. Check VPN/ExpressRoute
正解：C
解説：
* Outbound Communication Whitelisting:For NC2 Azure API calls and telemetry data to function correctly, certain outbound communications must be allowed. If these communications are not whitelisted, API calls can fail, and telemetry or health data might not be reported correctly.
* First Check:Given the symptoms (failing API calls and missing telemetry), the first step should be to ensure that all necessary outbound communications are correctly whitelisted. This includes ensuring that endpoints and services required for NC2 operation are accessible.
References:
* Nutanix NC2 Networking Requirements
* Azure Networking and Security Configuration Guide
質問 # 30
An administrator is tasked with creating a new subnet for a group of VMs that require inbound internet access.
Internal private addresses must be obscured to servers on the public internet.
Which network is best suited for satisfying this requirement?
- A. Layer 2 Stretch network
- B. No-NAT based network
- C. Bastion based network
- D. NAT based network
正解：D
解説：
* NAT Based Network:A NAT-based network is designed to provide inbound and outbound internet access while obscuring the internal private addresses. This setup uses Network Address Translation (NAT) to map internal IP addresses to a public IP address, ensuring that internal addresses are not exposed to the public internet.
* Security and Connectivity:NAT provides a layer of security by hiding internal IP addresses and allowing controlled access to external resources. This configuration is well-suited for VMs that need to communicate with servers on the public internet while maintaining the privacy of their internal network addresses.
References:
* Azure Virtual Network NAT Documentation
* Nutanix Networking and Security Configuration Guide
質問 # 31
When configuring an alert email in Prism Central deployment within an NC2 environment, what is required in order for the emails to be sent properly?
- A. Cluster Super Admin permissions
- B. SMTP server configured in Prism Central Settings
- C. A whitelisted public cloud console endpoint
- D. Name servers configure in Prism Central
正解：B
解説：
* SMTP Server Configuration:To send alert emails from Prism Central, it is essential to configure an SMTP server in the Prism Central settings. This server handles the email sending process, ensuring that alerts generated by Prism Central are properly delivered to the specified email addresses.
* Email Notification Setup:The SMTP server settings include the server address, port, and authentication details. Once these settings are correctly configured, Prism Central can use the SMTP server to send out alert emails reliably.
References:
* Nutanix Prism Central Administration Guide
* SMTP Configuration for Email Alerts in Prism Central
質問 # 32
An administrator has been tasked with scoping an NC2 on Azure deployment. One of the requirements is to ensure that the bare metal instance will support up to 20 TB of storage capacity.
Which bare metal instance should the administrator choose?
- A. HB176rs
- B. ND96asr
- C. AN36P
- D. AN36
正解：C
解説：
* Storage Capacity Requirement: The requirement specifies that the bare metal instance must support up to 20 TB of storage capacity.
* Instance Selection: Among the provided options, the AN36P instance is designed to support higher storage capacities and performance needs.
* AN36P Capabilities: The AN36P instance is optimized for storage-intensive applications and provides the necessary hardware specifications to handle up to 20 TB of storage.
* Comparison with Other Instances:
* ND96asr: Typically optimized for GPU workloads rather than storage.
* AN36: May not meet the 20 TB storage requirement.
* HB176rs: Geared towards high-performance computing rather than large storage capacities.
* Conclusion: Based on the requirements and instance specifications, AN36P is the most suitable choice for supporting up to 20 TB of storage.
References:
* Nutanix NC2 Instance Types
* Azure Virtual Machine Sizes
質問 # 33
An administrator has noticed the company's NC2 free trial expired 60 days ago.
Whatshouldthe administrator do to continue using all of the NC2 features on existing clusters?
- A. Contact Nutanix support to redeploy the cluster.
- B. Nothing. The clusters will have full feature support.
- C. Switch to a paid subscription plan.
- D. Contact the cloud vendor.
正解：C
解説：
* Free Trial Expiration:Once the NC2 free trial period expires, the administrator needs to switch to a paid subscription plan to continue using all the features and functionalities provided by Nutanix NC2.
* Paid Subscription Benefits:Transitioning to a paid subscription ensures uninterrupted access to NC2 features, support, and updates, maintaining the operational capabilities of the existing clusters.
References:
* Nutanix Subscription and Billing Documentation
* Nutanix NC2 Support and Subscription Guide
質問 # 34
An administrator has been tasked with ensuring NC2 VMs are able to access Azure and on-premises resources.
The NC2 VM traffic must not traverse the internet.
How can the administrator achieve this?
- A. By using a Site-to-Site VPN
- B. By using ExpressRoute
- C. By using an Interface Endpoint
- D. By using an SSH connection
正解：B
解説：
* Requirement Analysis: The NC2 VMs need to access Azure and on-premises resources without traversing the internet, ensuring secure and direct connectivity.
* Solution Options:
* SSH Connection: Suitable for individual remote access, not for full VM connectivity to Azure and on-premises resources.
* Interface Endpoint: Facilitates private connectivity to specific Azure services, but not comprehensive for all resources.
* ExpressRoute: Provides private, dedicated connectivity between Azure and on-premises environments. This ensures that traffic does not traverse the public internet, meeting the security and performance requirements.
* Site-to-Site VPN: Provides secure connectivity but can involve traversing the internet, which is against the requirements.
* Conclusion: ExpressRoute is the optimal solution as it offers a private connection that does not involve internet traversal, ensuring secure and efficient access to both Azure and on-premises resources.
References:
* Azure ExpressRoute Documentation
* Nutanix Clusters on Azure Networking Guide
質問 # 35
An administrator seeks to ensure that the newly-created NC2 organization named Finance can only deploy clusters into certain cloud regions.
Which action should the administrator take to do this?
- A. Configure RBAC roles on the Finance NC2 organization to allow access to regions.
- B. Open a support ticket with Nutanix to whitelist the allowed regions for the Finance N
- C. Specify allowed regions when configuring a cloud account for the Finance NC2 organization.
- D. Configure permissions in cloud accounts to restrict access to certain regions.
正解：C
解説：
* Cloud Account Configuration:When setting up a cloud account for the NC2 organization, the administrator can specify which regions are available for deploying clusters.
* Restricting Regions:This ensures that the Finance organization can only deploy clusters into the designated regions, complying with organizational policies and requirements.
References:
* Nutanix NC2 Configuration Guide
* Azure Subscription and Resource Management Documentation
質問 # 36
An administrator is tasked with preparing the company's Azure subscription for use with NCZ.
Which two Azure Resource Providers need to be registered? (Choose two.)
- A. Microsoft.Network
- B. Microsoft.HybridCompute
- C. Microsoft.HybridNetwork
- D. Microsoft.Nutanix
正解：A、D
解説：
* Azure Resource Providers: To prepare an Azure subscription for NC2, specific resource providers must be registered to enable necessary services and resources.
* Required Providers:
* Microsoft.Network: This provider is essential for networking functionalities, including virtual networks, subnets, and other network resources necessary for NC2 deployment.
* Microsoft.Nutanix: This provider is specifically required for integrating and managing Nutanix resources within the Azure environment.
* Other Providers:
* Microsoft.HybridNetworkandMicrosoft.HybridCompute: These are not specifically required for NC2 but might be relevant for other hybrid or extended network configurations.
* Conclusion: Registering both "Microsoft.Network" and "Microsoft.Nutanix" ensures that all necessary network and Nutanix-specific resources are available for NC2 deployment.
References:
* Azure Resource Providers Documentation
* Nutanix on Azure Setup Guide
質問 # 37
Native Azure VMs exist in a subnet (10.20.80.0/20) in the Prism Central VNet that need access to the workload running on the Nutanix User.
What needs to be modified to allow access from the native Azure VMs to the workloads running in the Nutanix User VPC?
- A. Adjust the Inbound Network Security Group on the Flow Gateway VM External NIC to allow traffic
102030.0/20. - B. Change the ERP value to the the subnet range of the native Azure VMs (10.20.80.0/20) on the Transit VPC and the Nutanix User VPC.
- C. Adjust the Inbound Network Security Group on the Flow Gateway VM Internal NIC to allow traffic
102030,0/20. - D. Remove the ERP value on the transit VPC and Nutanix User VPC.
正解：C
解説：
To allow access from the native Azure VMs to the workloads running in the Nutanix User VPC, the administrator needs to:
* Adjust the Inbound Network Security Group (NSG) on the Flow Gateway VM's Internal NIC.
* Specifically, allow traffic from the subnet range of the native Azure VMs (10.20.80.0/20) in the Inbound rules of the NSG associated with the Internal NIC of the Flow Gateway VM.
This configuration change permits the desired network traffic, ensuring that the native Azure VMs can communicate with the workloads in the Nutanix User VPC.References
* Azure Network Security Groups Overview
* Nutanix Networking and Security Best Practices
質問 # 38
A nutanix User VPC named Servers has a subnet named Tier1:
Servers: 10.0.0.0/20
Tier1: 10.0.0.0/25
Tier is using floating IPS to allow inbound traffic to the web servers that are hosted for a payroll system.
The company requires that the Network Security Group allow other Native Azure instances running in subnet AD (10.20.0.0/24) in the Prism Central VNet to be able to contact the web servers.
Which statement is true regarding this company requirement?
- A. The external NIC of the Flow Gateway Network Security Group needs to allow traffic from
10.20.0,0/24. - B. The internal NIC of the Flow Gateway Network Security Group needs to allow to traffic from 1
10.20.0.0/24. - C. Native Azure instances \n the Prism Central vNet will be allowed access by default.
- D. Policy based routing in the Servers VPC must be edited to allow traffic from 10.20.0.0/24.
正解：B
解説：
* Flow Gateway Network Security Group (NSG):NSGs control the traffic flow to and from network interfaces associated with VMs and other resources. Configuring the NSG correctly is crucial for ensuring that required traffic is allowed.
* Internal NIC Configuration:To allow Native Azure instances in the Prism Central VNet (10.20.0.0/24) to access the web servers in the Tier1 subnet, the internal NIC of the Flow Gateway must be configured to allow traffic from 10.20.0.0/24. This ensures that inbound traffic from these instances is permitted and properly routed to the web servers.
References:
* Azure Network Security Group Documentation
* Nutanix Flow Gateway Configuration Guide
質問 # 39
An administrator deploys an NC2 cluster in Azure and uses 10.100.0.0/16 for one of the VNets.
The cluster is configured as follows:
* 8 nodes
* Prism Central Deployed
* Files Deployed
Following the deployment, the administrator experiences network connectivity issues.
Which reason explains the connectivity issues?
- A. The 10.100.0.0/16 range is reserved by IANA.
- B. The 10.100.0.0/16 range is not a valid CIDR range.
- C. The W.100.0.0/16 range contains too many IP addresses for an NC2 cluster.
- D. 10.100.0.0/16 range is reserved for internal cluster usage.
正解：D
解説：
* Network Configuration: Using a specific IP range for a VNet can cause conflicts if that range is reserved or already in use by the cluster's internal operations.
* Internal Usage: In NC2, certain IP ranges are reserved for internal cluster functions and should not be used for VNets to avoid IP conflicts and connectivity issues.
* Impact: If the 10.100.0.0/16 range is reserved for internal usage, using it for a VNet would lead to IP conflicts, causing network connectivity issues.
* Verification: It's important to verify the reserved IP ranges in the NC2 documentation before assigning them to VNets.
* Conclusion: The connectivity issues are likely due to using the 10.100.0.0/16 range, which is reserved for internal cluster usage.
References:
* Nutanix Networking Guidelines
* Azure Virtual Network Documentation
質問 # 40 
Which action shouldthe administrator take to troubleshoot the error shown in the exhibit?
- A. Check the Azure subnet delegation status.
- B. Check the PC VNet is peered correctly.
- C. Check the Azure AD App registration Client Secret.
- D. Check the NC2 organization permissions.
正解：C
解説：
To troubleshoot the error shown in the exhibit where Azure credentials are not valid and the creation of the resource group failed, the administrator should:
* Verify that the Azure AD App registration has been correctly configured, especially the Client Secret.
* Ensure that the Client Secret is valid, has not expired, and matches what has been entered in the configuration.
This step is crucial because an invalid or expired Client Secret would prevent the validation of Azure credentials and the creation of necessary resources.
References
* Azure AD App Registration and Secrets Management
* Nutanix Cluster Configuration Documentation
質問 # 41
An administrator is planning an NC2 deployment in Azure and wants to connect the company's on-premises datacenter to the cloud environment.
What connectivity solution should the administrator use to avoid traffic between the locations flowing over the public internet?
- A. VTEP Gateways
- B. Point-to-Site VPN
- C. Site-to-Site VPN
- D. ExpressRoute
正解：D
解説：
To connect the company's on-premises datacenter to the Azure cloud environment while avoiding traffic over the public internet, the administrator should use Azure ExpressRoute. ExpressRoute provides a private connection to Azure, offering more reliability, faster speeds, and lower latencies compared to typical internet connections. This service ensures that data traffic does not traverse the public internet, enhancing security and performance.References
* Azure ExpressRoute Overview
質問 # 42
An administrator deploys a new NC2 cluster in Azure in a new subscription. No VPN or Express Route exists.
Which two actions will allow the administrator access to Prism Central to start the configuration? (Choose two.)
- A. Deploy a Jump Host VM instance in an external VNet and peer the VNets.
- B. Deploy a Jump Host VM instance in the Prism Central VNet inside a delegated subnet.
- C. Deploy a Jump Host VM instance and NAT Gateway in an external VNet and peer the VNets.
- D. Deploy a Jump Host VM instance in the Prism Central VNet inside a non-delegated subnet.
正解：A、B
解説：
* Jump Host VM in External VNet with VNet Peering:
* Deploy Jump Host VM:Deploy a VM in an external VNet that is not within the same network as Prism Central.
* VNet Peering:Establish VNet peering between the external VNet and the Prism Central VNet.
This allows the Jump Host to communicate with Prism Central securely.
* Jump Host VM in Prism Central VNet Inside a Delegated Subnet:
* Deploy Jump Host VM:Deploy the Jump Host VM directly in the Prism Central VNet within a delegated subnet. This places the Jump Host in the same network environment as Prism Central, allowing direct access.
References:
* Azure VNet Peering Documentation
* Nutanix NC2 Networking and Access Configuration Guide
質問 # 43
Exhibit.
An administrator is trying to figure out why the NC2 cluster deployment in Azure failed.
Which issue might be the cause?
- A. The selected bare metal node type is not supported in the deployment region.
- B. The company does not have sufficient NCI/AOS licenses.
- C. DNS servers are not reachable from cluster management VNet.
- D. The administrator has not specified a DNS server during deployment.
正解：A
解説：
* Error Message Analysis:The error message indicates that the node cannot boot successfully and will be replaced with a new node. This points towards an issue related to the specific node type or configuration.
* Bare Metal Node Support:One common cause for such deployment failures is selecting a bare metal node type that is not supported in the chosen deployment region. Azure has specific regions where certain node types are available, and attempting to use an unsupported node type in a region can result in provisioning failures.
References:
* Nutanix KB 9768 for troubleshooting deployment issues: KB 9768
* Azure Region Availability Documentation
* Nutanix NC2 on Azure Deployment Guide
質問 # 44
Exhibit
An NC2 on Azure cluster was deployed with two Flow Gateway in HA (FHW1 and FGW2). After a week of use, four bare-metal nodes were added to the NC2 cluster and additional workloads were added. The existing workloads were using floating IPs to allow inbound traffic to communicate with the running workloads on the NC2 cluster.
It was determined that additional bandwidth for north/south traffic would be needed. Two additional Flow Gateways were added (FGW3 and FGW4) from the NC2 portal configuration menu.
The existing workloads prior to expansion on the NC2 cluster will be able to use which Flow Gateways using the NAT traffic path after the expansion?
- A. All four Flow Gateways using a MAC/Hash algorithm.
- B. Only the Flow Gateway each workload was using prior to expansion.
- C. They will be able to use FGW3 and FGW4 once the NC2 workloads reboots.
- D. All four Flow Gateways.
正解：B
解説：
In the NC2 on Azure cluster scenario, the existing workloads were using floating IPs for inbound traffic before the addition of new Flow Gateways (FGW3 and FGW4). The NAT traffic path established initially will continue to direct traffic through the originally assigned Flow Gateways (FGW1 and FGW2). The existing workloads will not automatically utilize the new Flow Gateways (FGW3 and FGW4) without a reconfiguration or reboot, which reassigns the NAT paths.
References
* Nutanix Flow Networking and Configuration Guide
質問 # 45
An administrator has created a new overlay network. Which is intended for the company's user VMs.
The cluster has these characteristics:
* Policy-based Routing is not configured
*Only using external NAT
*DNS Server: 8.8.8.8
After adding a few VMs to the network, the administrator notices that the VMs cannot reach resources outside the network, even by IP address.
What is a likely cause?
- A. The DNS server is unreachable.
- B. A default route was not configured for the external subnet.
- C. The local cluster does not have access to the underlying network.
- D. The VPC connection is not established.
正解：B
解説：
When the administrator notices that the VMs cannot reach resources outside the network, even by IP address, it is likely that a default route was not configured for the external subnet. The default route is essential for directing traffic from the VMs to external networks. Without it, the VMs will not know how to route traffic to external destinations, which leads to connectivity issues.
References
* Azure Virtual Network Documentation
* Nutanix Flow Networking Best Practices
質問 # 46
An administrator needs to extend an on-premises subnet to an NC2 cluster on Azure.
Which set of options should the administrator configure to complete this task?
- A. Subnet Type: VPC subnets
Traffic Type: IPv4 unicast traffic and ARP
On-premises Hypervisor: ESXi, AHV, Hyper-V - B. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: AHV
- C. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic IPv6 unicast traffic and ARP On-premises Hypervisor: ESXi and AHV
- D. Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv6 umcasi traffic and ARP On-premises Hypervisor: Hyper-V
正解：C
解説：
To extend an on-premises subnet to an NC2 cluster on Azure, the administrator should configure:
* Subnet Type:Both on-premises VLAN subnets and VPC subnets. This ensures that the subnet can span both the on-premises environment and the Azure environment.
* Traffic Type:Support for IPv4 unicast traffic, IPv6 unicast traffic, and ARP is necessary to ensure
* proper communication and address resolution across the extended subnet.
* On-premises Hypervisor:ESXi and AHV are supported hypervisors for this type of configuration, allowing for a seamless extension of the subnet between these environments.
References
* Nutanix Hybrid Cloud Networking
質問 # 47
......
NCP-CI-Azure時間限定！無料アクセス：https://www.passtest.jp/Nutanix/NCP-CI-Azure-shiken.html
NCP-CI-Azure認定有効な試験問題集と解答学習ガイド：https://drive.google.com/open?id=10uqsBGnaaWWo7oTbLToc46hUsGVEySRk