更新された2026年09月03日検証済み！合格できる156-215.82試験一発合格保証付き
無料で使える156-215.82サンプルには問題100%カバー率でリアル試験問題（更新された183問あります)
質問 # 58
In R80 Management, apart from using SmartConsole, objects or rules can also be modified using:
- A. A complete CLI and API interface for Management with 3rd Party integration.
- B. A complete CLI and API interface using SSH and custom CPCode integration.
- C. 3rd Party integration of CLI and API for Management prior to R80.
- D. 3rd Party integration of CLI and API for Gateways prior to R80.
正解：B
解説：
In R80 Management, apart from using SmartConsole, objects or rules can also be modified using a complete CLI and API interface using SSH and custom CPCode integration. This allows you to automate tasks, integrate with third-party tools, and create custom scripts . 3rd Party integration of CLI and API for Gateways or Management prior to R80 is not relevant for R80 Management. A complete CLI and API interface for Management with 3rd Party integration is not a specific option. [Check Point R81 Security Management Administration Guide], [Check Point Learning and Training Frequently Asked Questions (FAQs)]
質問 # 59
Under which file is the proxy arp configuration stored?
- A. $FWDIR/state/_tmp/proxy.arp on the security gateway
- B. $FWDIR/conf/local.arp on the management server
- C. $FWDIR/state/proxy_arp.conf on the management server
- D. $FWDIR/conf/local.arp on the gateway
正解：D
解説：
The file that stores the proxy arp configuration is$FWDIR/conf/local.arpon the gateway3. The other files are not related to proxy arp configuration. How to configure Proxy ARP for Manual NAT on Security Gateway, [Check Point CCSA - R81: Practice Test & Explanation]
質問 # 60
What is the effect of enabling "Shared Layer" in an Inline Layer?
- A. It enables NAT translation
- B. It restricts access to the layer
- C. It disables the layer in other policies
- D. It allows the layer to be used in multiple rules and policies
正解：D
解説：
The correct answer is D. A shared layer allows a policy layer to be reused rather than recreated separately in every rule or policy package. In R82, layer properties include a sharing option that lets administrators share a layer with other policies. Official guidance also states that a new policy layer can be configured directly in a specific policy or as a shared policy layer for several policies, and that an Inline Layer can be configured within a specific rule while an Ordered Layer exists as a separate dedicated layer. This supports modular policy design: common controls can be centralized and reused, which improves consistency and reduces administrative duplication. Option A is wrong because NAT translation is configured through NAT rules and NAT settings, not by enabling a shared layer. Option B is the opposite of the real function; sharing increases reuse rather than disabling the layer elsewhere.
Option C is also wrong because permissions can restrict who edits a layer, but the "Shared Layer" function itself is about reuse across rules or policies. Reference topics: Policy Layers, Inline Layers, Ordered Layers, Shared Layers, SmartConsole Layer Properties.
質問 # 61
The Security Gateway uses Implied and Explicit rules to determine whether connections are allowed or denied.
Where can the administrator view the Implied rules?
- A. Use the command fw stat --implied-rules or the CLISH command show security-gateway implied-rules
- B. The Implied rules cannot be viewed in the SmartConsole. They are hidden and are there to allow Control Connections, including policy installation and log traffic.
- C. SmartConsole > MANAGE & SETTINGS > Blades > Firewall > Implied rules
- D. SmartConsole > SECURITY POLICIES > Actions > Implied rules
正解：D
解説：
The correct answer is C. Administrators can view implied rules from SmartConsole under the Security Policies view through Actions > Implied Rules. Implied rules are automatically generated rules used for essential Check Point control connections and management operations, such as policy installation, logging, and other required infrastructure traffic depending on global settings. Option A is not the correct navigation path for viewing them. Option B invents command syntax that is not the standard answer here. Option D is wrong because implied rules are not completely inaccessible; SmartConsole provides a way to view them. The distinction between explicit and implied rules matters during troubleshooting because traffic may match an implied rule before the visible administrator-created rulebase. Administrators should know how to inspect implied rules so they do not misdiagnose traffic behavior as unexplained. Reference topics: Implied Rules, Explicit Rules, Security Policies view, Access Control enforcement.
質問 # 62
What are the capabilities integrated into a Threat Prevention Policy?
- A. IPS, Anti-Bot, Application Control, URL Filtering
- B. Application Control, URL Filtering, Content Awareness, IPS
- C. IPS, Anti-Bot, Anti-Virus, SandBlast
- D. IPS Anti-Bot, Anti-Virus, Content Awareness, URL Filtering
正解：C
解説：
The correct answer is B. A Check Point Threat Prevention Policy integrates prevention-oriented blades and protections such as IPS, Anti-Bot, Anti-Virus, and SandBlast-related capabilities such as Threat Emulation and Threat Extraction, depending on licensing and configuration. Option A incorrectly includes Content Awareness and URL Filtering as Threat Prevention Policy capabilities; those are part of Access Control policy functionality in the unified policy model. Option C incorrectly places Application Control and URL Filtering under Threat Prevention. Option D makes the same category error by mixing Access Control features with IPS. In R82, Access Control answers "who/what may access what," using blades such as Firewall, Application Control, URL Filtering, Content Awareness, Identity Awareness, VPN, and Mobile Access. Threat Prevention answers "what malicious activity should be prevented," using protections against exploits, malware, bots, malicious files, and suspicious content. Reference topics: Threat Prevention Policy, IPS, Anti-Bot, Anti-Virus, SandBlast protections.
質問 # 63
A network administrator has informed you that they have identified a malicious host on the network, and instructed you to block it. Corporate policy dictates that firewall policy changes cannot be made at this time. What tool can you use to block this traffic?
- A. Policy-based routing
- B. Suspicious Activity Monitoring (SAM) rules
- C. Anti-Malware protection
- D. Anti-Bot protection
正解：B
解説：
If a network administrator has identified a malicious host on the network and instructed you to block it, but you cannot make any firewall policy changes at this time, you can use Suspicious Activity Monitoring (SAM) rules to block this traffic. SAM rules are temporary rules that allow you to block or limit traffic from specific sources or destinations without modifying the security policy. SAM rules are created and managed by SmartView Monitor and are enforced by the security gateway for a specified duration. Anti-Bot protection, Anti-Malware protection, and Policy-based routing are not tools that can be used to block traffic without changing the firewall policy. [Check Point R81 SmartView Monitor Administration Guide]
質問 # 64
In Check Point Security Management, what is the term for a logical grouping of one or more policy types?
(For example: Access Control, QoS, Desktop Security, Threat Prevention)
- A. Unified Policy
- B. Policy Package
- C. Group Policy Object (GPO)
- D. Global Policy
正解：B
解説：
The correct answer is D. A Policy Package is the logical grouping that can contain one or more policy types, such as Access Control, Threat Prevention, QoS, and other policy components depending on deployment. The package is then installed to appropriate Security Gateways or gateway clusters.
Option A is not the official term for this grouping in Check Point Security Management. Option B, Global Policy, belongs to Multi-Domain/global policy concepts and does not describe a standard package containing policy types. Option C, Group Policy Object, is Microsoft Active Directory terminology and is not a Check Point Security Management policy-package term. The exam concept is important because administrators do not install random independent rulebases; they install policy packages containing the configured policy types to enforcement points. Correct policy-package design ensures that the right Access Control, NAT, Threat Prevention, and related rules are installed to the correct gateways. Reference topics: Policy Packages, Access Control Policy, Threat Prevention Policy, policy installation.
質問 # 65
What are the types of Software Containers?
- A. Security Management, Standalone, and Security Gateway
- B. Smart Console, Security Management, and Security Gateway
- C. Security Management, Log & Monitoring, and Security Policy
- D. Security Management, Security Gateway, and Endpoint Security
正解：D
解説：
The types of Software Containers are Security Management, Security Gateway, and Endpoint Security. Software Containers are virtual environments that run on top of Gaia OS and allow multiple instances of Check Point products to coexist on the same physical machine. The other options are not valid types of Software Containers.
質問 # 66
What SmartEvent component creates events?
- A. SmartEvent Policy
- B. Correlation Unit
- C. Consolidation Policy
- D. SmartEvent GUI
正解：B
解説：
Correlation Unit is the SmartEvent component that creates events. It analyzes logs received from Security Gateways and Servers, and generates security events according to the definitions in the Consolidation Policy. [SmartEvent R80.40 Administration Guide], [Correlation Unit]
質問 # 67
What is a primary benefit of NAT?
- A. Accessibility - In a IPSec VPN environment, you can access resources with private IP addresses by assigning respective public IP addresses.
- B. Changing your source IP address hitting internet web servers randomly to hide your real identity for security reasons.
- C. Business Continuity - If only a small amount of IP addresses were allowed to access a particular resource, you can change your source IP address to overcome this limitation.
- D. Security - Hides internal IP addresses behind a public IP address which prevents the internal hosts from being exposed to the internet.
正解：D
解説：
The correct answer is B. A primary benefit of NAT is that it hides internal private IP addresses behind one or more translated public addresses, reducing direct exposure of internal addressing to external networks. Source NAT is commonly used for outbound internet access, while destination NAT can publish internal services through translated addresses. Option A is wrong because NAT is not random identity-hiding for anonymity; it is controlled address translation. Option C is not a proper security or continuity use case; using NAT to bypass source restrictions is not the intended administrative purpose.
Option D is misleading because VPNs commonly carry private addresses without requiring public NAT for every resource, and NAT inside VPN design is a separate special case, not the primary NAT benefit.
NAT does not replace Access Control. A translated connection still requires appropriate access policy permission. Reference topics: NAT Policy, automatic/manual NAT, address translation, Security Gateway packet handling.
質問 # 68
What is the command line to verify the backup was created?
- A. show backup list-successful
- B. show backups
- C. show backup successful
- D. show backup last-successful
正解：B
解説：
The correct answer from the provided CCSA item is D. The Gaia backup workflow uses Gaia Portal and Gaia Clish to create and review system backups. In the answer set, show backups is the only valid- looking Gaia Clish command intended to list backup information and confirm that backup output exists. The other options are malformed: show backup last-successful, show backup list-successful, and show backup successful are not proper Gaia-style commands for listing created backups. Check Point's R82 Gaia documentation also describes verification/recovery workflows where administrators can open the gateway shell and use Gaia Clish backup-related show commands, including show backup logs, to locate the compressed backup file name after a backup operation. The course item's expected command is therefore show backups, while the broader operational point is to verify backup creation from Gaia backup status/log information and ensure the generated .tgz backup file is present before relying on it. Reference topics: Gaia Administration, System Backup, Gaia Clish backup verification, backup logs.
質問 # 69
What are the three types of UserCheck messages?
- A. action, inform, and ask
- B. block, action, and warn
- C. ask, block, and notify
- D. inform, ask, and block
正解：D
解説：
The three types of UserCheck messages are inform, ask, and block. Inform messages notify users about security events and do not require any user action. Ask messages prompt users to choose whether to allow or block an action.Block messages prevent users from performing an action and display a reason1. Check Point R81 Logging and Monitoring Administration Guide
質問 # 70
Which of these Autonomous Threat Prevention profiles mainly focuses on providing extensive protection against server attacks and east-west traffic?
- A. Cloud/Data Center
- B. Guest Network
- C. Perimeter
- D. Strict Security
正解：A
解説：
The correct answer is A. The Cloud/Data Center profile is optimized for data center protection and includes extensive protection over servers and east-west traffic. East-west traffic refers to lateral traffic inside the environment, such as server-to-server or workload-to-workload communication, rather than north-south internet-facing traffic. Option B is wrong because Guest Network is designed for guest-user environments, not data center server protection. Option C is wrong because Perimeter profiles focus on perimeter gateways and north-south traffic exposure. Option D is too generic; Strict Security for Perimeter is a perimeter-focused maximum-security profile, not the profile specifically described as protecting servers and east-west traffic in data centers. This item directly matches the R82 profile descriptions. Reference topics: Autonomous Threat Prevention Profiles, Cloud/Data Center Profile, server protection, east-west traffic.
質問 # 71
When configuring Spoof Tracking, which tracking actions can an administrator select to be done when spoofed packets are detected?
- A. Drop packet, alert, none
- B. Log, send snmp trap, email
- C. Log, alert, none
- D. Log, allow packets, email
正解：C
解説：
The tracking actions that can be selected when configuring Spoof Tracking areLog, alert, none. Spoof Tracking is a feature that detects packets with spoofed source IP addresses and logs them in SmartView Tracker. The administrator can choose to log only, log and alert, or do nothing when spoofed packets are detected. The other options are not valid tracking actions for Spoof Tracking, as they are either not available or not relevant for this feature.
質問 # 72
You have successfully backed up your Check Point configurations without the OS information. What command would you use to restore this backup?
- A. migrate import
- B. cp_merge
- C. import backup
- D. restore_backup
正解：D
解説：
The command to restore a backup of Check Point configurations without the OS information isrestore_backup4. This command restores the Gaia OS configuration and the firewall database from a compressed file. The other commands are not valid for this purpose.import backupis not a valid command.cp_mergeis a command to merge policies or objects from different databases.migrate importis a command to import a previously exported database usingmigrate export. System Backup and Restore feature in Gaia, [cp_merge], [migrate import]
質問 # 73
Which of the following is the default role-based shell on Gaia?
- A. Supermode
- B. AdvancedCLI
- C. Clish
- D. Expert
正解：C
解説：
The correct answer is D. The default Gaia shell is Gaia Clish. Official R82 Gaia documentation explicitly states that the default Gaia shell is called clish and describes Gaia Clish as a restrictive shell where role-based administration controls the commands available to the logged-in user. This matters because Gaia separates routine administrative operations from unrestricted low-level access. Expert Mode exists, but it is more permissive and should be used only when lower-level operating system access is required. Option A is therefore wrong as a default shell answer: Expert Mode is available, but not the default role-based shell. Options B and C are not official Gaia shell names in R82. Gaia Clish is used for system configuration and operational commands such as interfaces, routes, DNS, users, roles, backups, and other platform settings. For CCSA, the important point is that Gaia Clish is the controlled administrative CLI, while Expert Mode is the Linux-based shell used for advanced troubleshooting and low-level operations. Reference topics: Gaia Clish, Expert Mode, role-based administration, Gaia OS.
質問 # 74
......
今すぐダウンロード！リアルCheckPoint 156-215.82試験問題集テストエンジン試験問題：https://www.passtest.jp/CheckPoint/156-215.82-shiken.html
検証済み！156-215.82問題集と解答で156-215.82テストエンジン正確解答付き：https://drive.google.com/open?id=1-FU08PDg2jNm7HcvRejS1oKYoF0O9yr0