更新済みの2025年04月 D-PDD-DY-23試験練習テスト問題
検証済みD-PDD-DY-23問題集と解答100%一発合格保証で更新された問題集
EMC D-PDD-DY-23 認定試験の出題範囲:
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 24
What are some possible network bottlenecks for a PowerProtect DD?
- A. Routing protocols, switches and routers, and wire speeds
- B. Connectivity, firewalls, and routing protocols
- C. Configuration, wire speeds, switches and routers
- D. Connectivity, routing protocols, and configuration
正解:C
解説:
In PowerProtect DD environments, network performance can be affected by various factors, and bottlenecks often arise from:
Configuration: Misconfigured network settings or incorrect protocols can limit the system's performance.
Wire speeds: The physical speed of the network cables (e.g., 1 GbE, 10 GbE) impacts data transfer rates.
Switches and routers: These network devices can introduce latency or limit bandwidth, especially if they are not optimized or if there are too many hops in the network path.
By addressing these areas, you can improve network throughput and ensure that the PowerProtect DD system is not constrained by network bottlenecks.
質問 # 25
What is the order of steps to configure DD Boost on a PowerProtect DD appliance?
正解:
解説:
質問 # 26
The finance department requires unused PDFs older than 90 days to be tiered into Azure Blob Storage.
Which data movement policy is used to archive the files?
- A. App-driven
- B. Age-range
- C. Age-based
- D. Recall
正解:C
質問 # 27
An engineer is deploying a new PowerProtect DD9900 system that includes ES40, DS60, and FS25 expansion shelves.
What should the engineer consider when cabling the hardware?
- A. The DS60 shelf must be populated with identical drives
- B. The DS60 shelf should be cabled on a separate chain
- C. The FS25 shelf should be cabled on a separate chain
- D. The FS25 shelf must be fully populated
正解:C
質問 # 28
What is a use case of BoostFS
- A. To enable snapshot on DD Boost data
- B. To increase DD Boost throughput
- C. To protect applications that do not support DD Boost
- D. To implement DD Boost over Fibre Channel
正解:C
質問 # 29
Refer to the exhibit.
To which shelf and port should SAS HBA slot 1 port B be connected?
- A. Shelf 04 BH
- B. Shelf 04 BE
- C. Shelf 01 BE
- D. Shelf 01 BH
正解:A
質問 # 30
An administrator recognizes poor network performance when using CIFS shares from a PowerProtect DD system. The network link utilization is under 100%. What is the most likely cause of this issue?
- A. TCP window size too small
- B. TCP timeout too small
- C. TCP window size too large
- D. TCP timeout too large
正解:A
解説:
Explanation: A small TCP window size can restrict data throughput, leading to suboptimal performance in CIFS-based file transfers. Adjusting the TCP window size can help maximize network bandwidth utilization and improve transfer speeds.
質問 # 31
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?
- A. FTP
- B. HTTPS
- C. SSL
- D. SSH
正解:B
質問 # 32
What is the preferred method to ensure backups are protected against deletion or corrupt?
- A. Data Invulnerability Architecture
- B. Dell EMC Cloud Tier
- C. Retention Lock
- D. Encryption
正解:A
質問 # 33
Which is required to store and manage archive data on a single PowerProtect DD appliance to comply with regulatory standards?
- A. Retention Lock Governance
- B. Encryption for Data at Rest
- C. Retention Lock Compliance
- D. Dell EMC Cloud Tier
正解:C
質問 # 34
What is the correct order of steps to verify DD Boost implementation and clone functionality?
正解:
解説:
Explanation:
質問 # 35
A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack.
When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?
- A. Expansion port of the controller
- B. Expansion port of the upstream shelf
- C. Host port of the controller
- D. Host port of the downstream shelf
正解:B
質問 # 36
A customer requires a backup for their daily operational data. They do not back up directly to the PowerProtect DD appliance using Avamar backup software.
What will be the result of the backup process?
- A. Data will be unable to restore locally
- B. Backup server will preserve the data on the PowerProtect DD appliance
- C. Backup process will be using post dedupe technology
- D. Backup file will be available on cloud tier
正解:B
質問 # 37
A customer is attempting to configure VTL with 68 libraries, 800 slots, 524 drives, and 100 CAPs each but is unable to complete the configuration.
What is the cause of this issue?
- A. Reached slots limit
- B. Reached libraries limit
- C. Reached drives limit
- D. Reach CAPs limit
正解:B
解説:
PowerProtect DD appliances have specific limits on the number of libraries, slots, drives, and CAPs that can be configured. In this case, reaching the limit of 68 libraries likely exceeds the maximum allowed, preventing the configuration from being completed. Each component has its own limits, but in this scenario, the number of libraries is the bottleneck that prevents successful configuration.
質問 # 38
An IBM Spectrum Protect administrator would like to use the benefits of DD Boost.
Which technology will allow this integration?
- A. ICIFS
- B. BooslFS
- C. NFS
- D. VTL
正解:B
解説:
BoostFS (Boost File System) is a DD Boost-enabled file system interface that allows applications like IBM Spectrum Protect to take advantage of DD Boost features, such as optimized deduplication, load balancing, and improved backup/restore performance. By using BoostFS, IBM Spectrum Protect can efficiently integrate with PowerProtect DD appliances to leverage DD Boost's capabilities for faster and more efficient data transfer.
質問 # 39
An administrator is configuring an AWS S3 cloud unit on their DD9400.
Which certificate must be imported before adding the cloud unit?
- A. GlobalSign Root R1
- B. GlobalSign Root R2
- C. S3 Flexible
- D. Baltimore CyberTrust Root CA
正解:D
質問 # 40
What is the maximum number of open CIFS files that DDOS supports in PowerProtect DD?
- A. 20,000
- B. 40,000
- C. 60,000
- D. 30,000
正解:C
解説:
Explanation: PowerProtect DD supports up to 60,000 open CIFS files, ensuring high scalability and performance in file-based data storage. This capability is essential for environments with high file access requirements.
質問 # 41
Refer to the exhibit.
Match each action to its call-out location. Select and Place:
正解:
解説:
質問 # 42
A company has SMT and VTL enabled on a PowerProtect DD appliance. They back up their data to virtual tape under a VTL pool named "finance".
Where is the backup data stored on the PowerProtect DD appliance?
- A. /data/col1/<tenatname>/vtl/finance
- B. /data/col1/<tenatname>/finance
- C. /data/col1/finance
- D. /data/col1/vtl/finance
正解:C
質問 # 43
Which command is used to start the initial CLI configuration wizard?
- A. config
- B. config setup
- C. setup
- D. install config
正解:B
質問 # 44
An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?
- A. 0
- B. 1
- C. 2
- D. 3
正解:A
質問 # 45
......
究極の準備用無料ガイドD-PDD-DY-23試験問題と解答:https://drive.google.com/open?id=1vifo326Zxk_XjD9AnS-BCNLLSgcYADBH
合格できるDell Data Protection D-PDD-DY-23試験問題集には165問があります:https://www.passtest.jp/EMC/D-PDD-DY-23-shiken.html