最新のN10-008日本語学習ガイド2024年最新の- 提供するのはテストエンジンとPDF [Q313-Q338]

Share

最新のN10-008日本語学習ガイド2024年最新の- 提供するのはテストエンジンとPDF

最新版を今すぐ試そうN10-008日本語練習テスト問題解答が待ってます

質問 # 313
ネットワーク技術者は、ネットワーク スイッチのポート 1/3 に接続されているクライアント PC のパフォーマンスの問題に関するレポートを受け取ります。技術者は、スイッチから次の構成出力を確認します。

ポート 1/3 の問題の原因は次のうちどれですか?

  • A. 両面
  • B. スピード
  • C. VLAN
  • D. エラー

正解:B


質問 # 314
ネットワーク技術者はワイヤレス アクセス ポイントを構成しており、会社所有のデバイスのみをネットワークに関連付けることを許可したいと考えています。アクセス ポイントは PSK を使用しており、ネットワーク認証システムはネットワーク上に存在しません。技術者は次のうちどれを実装する必要がありますか?

  • A. ゲストネットワークの分離
  • B. ジオフェンシング
  • C. キャプティブ ポータル
  • D. MACフィルタリング

正解:D

解説:
Explanation
MAC filtering is a method of allowing only company-owned devices to associate with the network by using their MAC addresses as identifiers. A MAC address is a unique identifier assigned to each network interface card (NIC) by the manufacturer. MAC filtering can be configured on the wireless access point to allow or deny access based on the MAC address of the device. This way, only devices with known MAC addresses can connect to the network. References: https://www.comptia.org/training/books/network-n10-008-study-guide (page 323)


質問 # 315
次の文書のうち、重要なアプリケーションの特定と文書化に関連する可能性が最も高いのはどれですか?

  • A. ユーザー受け入れテスト計画
  • B. ソフトウェア開発ライフサイクル ポリシー
  • C. 事業継続計画
  • D. 変更管理ポリシー

正解:C

解説:
Explanation
A business continuity plan (BCP) is a document that outlines the procedures and strategies to ensure the continuity of critical business functions in the event of a disaster or disruption. A BCP is most likely to be associated with identifying and documenting critical applications that are essential for the organization's operations and recovery. A BCP also defines the roles and responsibilities of the staff, the backup and restore processes, the communication channels, and the testing and maintenance schedules.
References: Network+ Study Guide Objective 5.2: Explain disaster recovery and business continuity concepts.


質問 # 316
最近完了した現場調査の結果によると、駐車場やその近くのその他の屋外エリアでは、望ましくない重大な RSSI が発生し、屋外アクセス エリアでのワイヤレス ネットワークへのアクセスが軽減されています。現在のアクセス ポイントの設定を次の表に示します。

問題を解決するために技術者が実行する最善の手順は次のうちどれですか?

  • A. AP1 と AP2 の SSID を変更します。
  • B. AP2 と AP3 の電力設定を上げます。
  • C. 重複しないチャネル用に AP2 と AP3 を再構成します。
  • D. AP1 と AP2 に指向性アンテナを実装します。

正解:D

解説:
Explanation
Implementing directional antennas on AP1 and AP2 is the best step for the technician to take to resolve the issue of undesired RSSI in the parking lot and other exterior areas near the building. RSSI stands for received signal strength indicator, which is a measure of how well a device can receive a wireless signal from an access point (AP). An AP is a device that provides wireless connectivity to a network. An antenna is a device that radiates or receives electromagnetic waves. A directional antenna is an antenna that focuses the wireless signal in a specific direction, resulting in higher gain and longer range. By using directional antennas on AP1 and AP2, which are located near the exterior walls of the building, the technician can reduce the wireless signal leakage to the outside areas and improve the wireless coverage inside the building. References: [CompTIA Network+ Certification Exam Objectives], What Is RSSI and How Does It Affect Wireless Networks?, Directional Antennas: Everything You Need to Know


質問 # 317
アプリケーション層の特徴は次のうちどれですか?

  • A. パケットロスを独自にチェックします。
  • B. 転送中のデータを暗号化します。
  • C. アドレス変換を行います。
  • D. パケット配信を他の層に依存します。

正解:D

解説:
The application layer is the highest layer of the OSI model, and it provides the interface between the user and the network. It does not handle the details of packet delivery, such as addressing, routing, error checking, or encryption. Those functions are performed by the lower layers of the OSI model. The application layer only focuses on the format, content, and presentation of the data.
Reference:
Understanding the OSI Model - N10-008 CompTIA Network+ : 1.11
CompTIA Network+ Certification Exam Objectives, page 92


質問 # 318
次のクラウド コンポーネントのうち、クラウド リソース間の受信トラフィックと送信トラフィックをフィルタリングできるのはどれですか?

  • A. NAT ゲートウェイ
  • B. ネットワークセキュリティグループ
  • C. サービスエンドポイント
  • D. 仮想プライベートクラウド

正解:B

解説:
Network security groups are cloud components that can filter inbound and outbound traffic between cloud resources based on rules and priorities. Network security groups can be applied to virtual machines, subnets, or network interfaces to control the network access and security. Network security groups can allow or deny traffic based on the source, destination, port, and protocol of the packets. Network security groups are different from NAT gateways, service endpoints, and virtual private clouds, which are other cloud components that have different functions and purposes.
Reference
1: Network Security Groups - N10-008 CompTIA Network+ : 3.2
2: CompTIA Network+ N10-008 Certification Study Guide, page 329-330
3: CompTIA Network+ N10-008 Exam Subnetting Quiz, question 17
4: CompTIA Network+ N10-008 Certification Practice Test, question 10


質問 # 319
次の物理的なセキュリティ方法のうち、共連れを防ぐのに最も効果的なのはどれですか?

  • A. アクセス制御前庭のバイオメトリクス
  • B. 改ざん防止機能付きスマートロッカー
  • C. 動体検知機能付き IP カメラ
  • D. バッジ リーダーと PIN パッド

正解:A

解説:
Biometrics is a type of authentication that uses a person's physical characteristics, such as fingerprints, iris, or face, to verify their identity. An access control vestibule is a small room or area that separates two spaces and allows only one person to enter or exit at a time. Biometrics in an access control vestibule is the most effective physical security method to prevent tailgating, which is the unauthorized entry of a person behind another person who has legitimate access.


質問 # 320
VoIP 電話を使用している会社では、片通話と会話の途切れという断続的な問題が発生しています。メーカーは、ping 時間が 50 ミリ秒未満であればシステムは機能すると述べています。同社は次の ping 時間を記録しています。

問題を引き起こしている可能性が最も高いのは、次のうちどれですか?

  • A. ジッター
  • B. 減衰
  • C. レイテンシー
  • D. VLAN の不一致

正解:B


質問 # 321
次の情報が与えられた場合:

次のコマンドライン ツールのうち、この出力を生成するのはどれですか?

  • A. トレーサート
  • B. 掘る
  • C. arp
  • D. ネット統計

正解:A

解説:
Explanation
Tracert is a command-line tool that traces the route of a packet from a source to a destination and displays the number of hops and the round-trip time for each hop. The output shown in the question is an example of a tracert output, which shows five hops with their IP addresses and hostnames (if available) and three latency measurements for each hop in milliseconds. References:
https://partners.comptia.org/docs/default-source/resources/comptia-network-n10-008-exam-objectives-(2-0),
https://www.lumen.com/help/en-us/network/traceroute/understanding-the-traceroute-output.html


質問 # 322
ユーザーはラップトップを旅行に持ち出し、空港にいる間にネットワーク パラメータを変更しました。ユーザーはすべてのインターネット Web サイトにアクセスできますが、企業イントラネット Web サイトにはアクセスできません。問題の原因として最も考えられるのは次のうちどれですか?

  • A. IP アドレスが重複しています
  • B. DNS が正しくありません
  • C. SSIDが重複しています
  • D. サブネットマスクが正しくありません

正解:B

解説:
DNS (Domain Name System) is a service that translates domain names into IP addresses. Corporate intranet websites are usually hosted on private IP addresses that are not accessible from the public internet. Therefore, the user's laptop needs to use the correct DNS server that can resolve the intranet domain names to the private IP addresses. If the user changed the network parameters at the airport and did not revert them back, the laptop might be using a public DNS server that does not have the records for the intranet websites. This would cause the user to access all internet websites but not corporate intranet websites.
Reference:
An Overview of DNS - N10-008 CompTIA Network+ : 1.61
DNS Configuration - CompTIA A+ 220-11012
CompTIA Network+ Certification Exam Objectives, page 53


質問 # 323
ネットワーク技術者が、地理的に異なる場所にある Windows ベースのサーバーに新しいソフトウェアをインストールしています。技術者がこのタスクを実行するために使用するのに最適なのは、次のうちどれですか?

  • A. DNS
  • B. SSH
  • C. RDP
  • D. FTP

正解:C

解説:
Explanation
RDP (Remote Desktop Protocol) is the best option for a network technician to use when installing new software on a Windows-based server in a different geographical location. This protocol allows the technician to connect to the server remotely and control it as if they were physically present.
References:
Network+ N10-007 Certification Exam Objectives, Objective 2.2: Given a scenario, implement the appropriate network-based security and troubleshoot common connectivity issues.


質問 # 324
管理者は、MDF 内の複数のスイッチと接触した後、静電放電が原因で障害が発生したことに気付きました。管理者は、MDF の静電気状態を最適に監視するために、どの草刈りセンサーを導入する必要がありますか?

  • A. スモーク
  • B. 電気
  • C. 湿度
  • D. 温度

正解:C

解説:
"Humidity control prevents the buildup of static electricity and reduces the chances of electronic components becoming vulnerable to damage from electrostatic shock; not only can very low humidity lead to increased static electricity, but it can also contribute to health problems, such as skin irritation."


質問 # 325
RJ45 ポートを備えたエンドポイント デバイスを ST ポートを備えたネットワーク デバイスに接続する場合、次のどれが必要ですか?

  • A. ロードバランサ
  • B. MDIX
  • C. 橋
  • D. メディアコンバータ

正解:D

解説:
The device that is required when connecting an endpoint device with an RJ45 port to a network device with an ST port is a media converter. A media converter is a device that converts signals between different types of media, such as copper and fiber. An RJ45 port is used for twisted-pair copper cables, while an ST port is used for fiber-optic cables. A media converter allows these two types of cables to interconnect and communicate. Reference: CompTIA Network+ N10-008 Certification Study Guide, page 54; The Official CompTIA Network+ Student Guide (Exam N10-008), page 2-5.


質問 # 326
ネットワーク エンジニアは、WAN 接続に使用する新しいルーターを受け取ります。ネットワーク エンジニアが新しいルーターを接続する必要がある層を最もよく説明しているものは次のうちどれですか?

  • A. コア
  • B. 配布
  • C. 葉
  • D. アクセス

正解:B

解説:
Explanation
The distribution layer is the layer that connects the access layer to the core layer in a hierarchical network design. The distribution layer is responsible for routing, filtering, and policy enforcement between the LAN and the WAN. A router is a layer 3 device that can perform these functions and connect to different WAN technologies.
References:
CompTIA Network+ N10-008 Certification Study Guide, page 151
CompTIA Network+ N10-008 Cert Guide, Deluxe Edition, page 322
CompTIA Network+ N10-008 Exam Cram, page 233


質問 # 327
組織は、組織の目標をサポートするバックアップ ソリューションの購入に関心を持っています。次の概念のうち、運用に影響を与える前に特定のサービスを停止できる最大期間を指定するものはどれですか?

  • A. RPO
  • B. MTTR
  • C. RTO
  • D. MTBF

正解:C

解説:
The maximum duration that a given service can be down before it impacts operations is often referred to as the Recovery Time Objective (RTO). RTO is a key consideration in any backup and disaster recovery plan, as it determines how quickly the organization needs to be able to recover from a disruption or failure. It is typically expressed in terms of time, and it helps to inform the design and implementation of the backup solution. For example, if an organization has a critical service that must be available 24/7, it may have a very low RTO, requiring that the service be restored within a matter of minutes or even seconds. On the other hand, if the service can be down for a longer period of time without significantly impacting operations, the organization may have a higher RTO. When selecting a backup solution, it is important to consider the organization's RTO requirements and ensure that the solution is capable of meeting those needs. A solution that does not meet the organization's RTO requirements may not be sufficient to ensure the availability of critical services in the event of a disruption or failure.


質問 # 328
構成されたネットワーク デバイスでさまざまな種類の管理者権限の資格情報を集中管理するために使用できるのは、次のうちどれですか?

  • A. TACACS+
  • B. 多要素認証
  • C. ゼロ トラスト
  • D. 職務の分離
  • E. SSO

正解:A

解説:
TACACS+ is used to authenticate users and authorize access to network resources. This protocol provides greater network security by encrypting the authentication credentials and reducing the risk of unauthorized access. According to the CompTIA Network+ Study Manual, "TACACS+ is an authentication protocol used to centralize authentication and authorization for network devices. It is a more secure alternative to Telnet for handling logins and for granting privileges to users."


質問 # 329
セキュリティ ベンダーは、サービスを開始する前に、会社のドメインの所有権を検証するために DNS にメモを追加する必要があります。次のレコードのうち、セキュリティ会社が会社に構成を依頼した可能性が最も高いのはどれですか?

  • A. CNAME
  • B. TXT
  • C. AAAA
  • D. SRV

正解:B

解説:
Explanation
TXT stands for Text and is a type of DNS record that can store arbitrary text data associated with a domain name. TXT records can be used for various purposes, such as verifying the ownership of a domain, providing information about a domain, or implementing security mechanisms such as SPF (Sender Policy Framework) or DKIM (DomainKeys Identified Mail). In this scenario, the security company most likely asked the company to configure a TXT record with a specific value that can prove the ownership of the domain. AAAA stands for IPv6 Address and is a type of DNS record that maps a domain name to an IPv6 address. CNAME stands for Canonical Name and is a type of DNS record that maps an alias name to another name. SRV stands for Service and is a type of DNS record that specifies the location of a service on a network.
References: CompTIA Network+ Certification Exam Objectives Version 7.0 (N10-007), Objective 1.8:
Explain the purposes and use cases for advanced networking devices.


質問 # 330
コンピュータがサポート終了に達したことを示すものは次のうちどれですか?

  • A. これ以上のパッチやバグ修正は無期限に利用できません。
  • B. オペレーティング システムのライセンスの有効期限が切れています。
  • C. コンピュータにはユーザーがいません。
  • D. ウイルス対策保護の有効期限が切れています。

正解:A

解説:
Explanation
No more patches or bug fixes are available indefinitely. This indicates that a computer has reached end-of-support, which means that the manufacturer or vendor of the hardware or software no longer provides technical assistance, updates, or security fixes for the product12. This can expose the computer to potential security risks and compatibility issues with newer technologies


質問 # 331
非従業員がサーバー ルームに入ることができました。次のうち、これを防ぐことができたのはどれですか?

  • A. 生体認証リーダー
  • B. 防犯カメラ
  • C. 社員教育
  • D. OTP キーフォブ

正解:A

解説:
A biometric reader is a device that scans a person's physical characteristics, such as fingerprints, iris, or face, and compares them to a database of authorized users. A biometric reader can be used to restrict access to a server room and prevent unauthorized entry. A biometric reader provides a high level of security and cannot be easily bypassed or duplicated.


質問 # 332
ネットワーク技術者は、外部ユーザーがデータセンターのどのサーバーにも telnet 接続できないようにする必要があります。ファイアウォールの構成を確認するときにブロックする必要があるポートは、次のうちどれですか?

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

正解:A


質問 # 333
ネットワーク管理者がデータセンターに足を踏み入れたところ、見知らぬ人が近くをフォローしていることに気づきました。管理者は立ち止まり、その人物をセキュリティ デスクに誘導します。ネットワーク管理者が防いだ攻撃は次のうちどれですか?

  • A. ピギーバック
  • B. 共連れ
  • C. ショルダーサーフィン
  • D. 悪の双子

正解:B


質問 # 334
次のポリシーのうち、ゲスト キャプティブ ポータルに最も一般的に使用されるのはどれですか?

  • A. AUP
  • B. DLP
  • C. NDA
  • D. BYOD

正解:A

解説:
AUP stands for Acceptable Use Policy, which is a policy that defines the rules and guidelines for using a network or service. A guest captive portal is a web page that requires users to agree to the AUP before accessing the Internet or other network resources. This is a common way to enforce security and legal compliance for guest users. Reference: https://www.arubanetworks.com/techdocs/Instant_87_WebHelp/Content/instant-ug/captive-portal/captive-portal.htm


質問 # 335
ネットワーク エンジニアは、次の特徴を持つ新しいオフィス スペースを設計および実装しました。
オフィススペースが導入されてから 1 か月後、ユーザーは、別の部屋に入ると信号がドロップされ、5GHz ネットワークへの全体的な接続が不十分であると報告し始めました。問題を最もよく解決するには、エンジニアが次のうちどれを行うべきですか?

  • A. 指向性アンテナに変更-
  • B. 2.4GHz をサポートするようにネットワークを再構成します_
  • C. 重複しないチャネルを使用します
  • D. WPA3にアップグレードします。

正解:A

解説:
The best solution to resolve the issue of dropped signals and poor connections to the 5GHz network is to change to directional antennas. Directional antennas are antennas that focus the wireless signal in a specific direction, increasing the range and strength of the signal. Directional antennas are suitable for environments where there are obstacles or interference that can weaken or block the wireless signal. In the image, the office space has several walls and doors that can reduce the signal quality of the 5GHz network, which has a shorter wavelength and higher frequency than the 2.4GHz network. By using directional antennas, the network engineer can aim the wireless signal towards the desired areas and avoid the signal loss caused by the walls and doors. Reference: CompTIA Network+ N10-008 Certification Study Guide, page 76; The Official CompTIA Network+ Student Guide (Exam N10-008), page 2-19.


質問 # 336
技術者が収納クローゼットを掃除していて、8Gbps とラベル付けされたトランシーバーの箱を見つけました。これらのトランシーバーを使用するプロトコルは次のうちどれですか?

  • A. Internet Small Computer Systems Interface
  • B. ファイバーチャネル
  • C. ギガビット インターフェイス コンバーター
  • D. 同軸オーバー イーサネット

正解:B

解説:
The transceivers labeled 8Gbps are likely to be used with the Fibre Channel protocol. Fibre Channel is a high-speed networking technology that is primarily used to connect storage devices to servers in storage area networks (SANs). It is capable of transmitting data at speeds of up to 8 Gbps (gigabits per second), and uses specialized transceivers to transmit and receive data over fiber optic cables.
Coaxial over Ethernet (CoE) is a networking technology that uses coaxial cables to transmit data, and is not related to the transceivers in question. Internet Small Computer Systems Interface (iSCSI) is a protocol that allows devices to communicate over a network using the SCSI protocol, and does not typically use specialized transceivers. Gigabit interface converter (GBIC) is a type of transceiver used to transmit and receive data over fiber optic cables, but it is not capable of transmitting data at 8 Gbps.


質問 # 337
ローカル ネットワーク上にいる PC ユーザーが、ネットワーク サーバー上のファイルにアクセスするときの速度が非常に遅いと報告している ユーザーの PC は接続しているが、他のユーザーのダウンロード速度に比べてファイルのダウンロードが非常に遅い PC の NIC はギガビット イーサネットに対応している必要があります。次のうち、問題を解決する可能性が最も高いのはどれですか?

  • A. PCのIPアドレスの解除と更新
  • B. DNS キャッシュのフラッシュ
  • C. パッチケーブルの交換
  • D. PC 内の NIC の取り付け直し

正解:C

解説:
Explanation
A slow download speed can be caused by a faulty patch cable, which is the cable used to connect the user's PC to the network server. If the patch cable is damaged, the connection will be slower than expected, resulting in slow download speeds. Replacing the patch cable is the most likely solution to this issue, as it will provide a new, reliable connection that should allow for faster download speeds.


質問 # 338
......

N10-008日本語問題集と試験テストエンジン:https://www.passtest.jp/CompTIA/N10-008J-shiken.html