最新 [2023年05月] 効果的な学習法でPassTestの問題集でOMS-435テストを合格せよ
実績のある受験者のシミュレーションされたOMS-435試験PDF問題を試そう
質問 # 19
A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?
- A. DataRaptor Post Action
- B. Lookup
- C. Select
- D. HTTP Action
正解：B
質問 # 20
Refer to the exhibit below. What JSON from the DRGetContactDeteils action would display all six values correctly in the shown? BlkCases is a Repeat Block, and the names of the elements are the same as the label names without spaces.
- A.
- B.
- C.
- D.
正解：C
質問 # 21
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- B. Use Data JSON is not selected in the properties of the Type Ahead Block.
- C. Lookup Mode is not selected in the properties of the Type A Head Block.
- D. The Typeghead ley is not in the correct format
正解：A
質問 # 22
A developer needs to create . DataRaptor to retrieve the name of an account for a contact.
Following best practices, how should a developer configure the extraction steps?
- A. Define extraction steps for the Contact and the Account objects, and set the Extract JSON Path to Contact Account.Name
- B. Define an extraction step for the Account object, and set the Extract JSON Path to AccountContact.Name
- C. Define an extraction step for the Contact object and set the Extract JSON Path to Contact Account.Name
- D. Define extraction steps for the Contact and the Account objects, and set the Extract 3SON Path to Account.Name
正解：C
質問 # 23
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be included in constants.
- B. It must be a calculation step.
- C. It must be a matrix lookup step.
- D. It must be included in the calculation output.
正解：D
質問 # 24
Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers
- A. In Procedure Configuration, in a Tracking Custom Data value field.
- B. In a Remote Action, in an Additional Output value field.
- C. In a Response Action, in an Additional input value field.
- D. In a Remote Action, in a Remote Options value field.
正解：B、C
質問 # 25
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Postalcode}
- B. {Params.postalcode}
- C. {Records.postalcode}
- D. {Parent.postalcode}
正解：D
質問 # 26
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
- A.
- B.
- C.
- D.
正解：C
質問 # 27
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Add a Show/Hide condition on the Set Values element.
- B. Delete or Deactivate the Set Values element.
- C. Deactivate the contextId key/value pair
- D. Update the ContextId value to specify an id from the Production org.
正解：B
質問 # 28
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
- B. The flag passDataJSON in the parent OmniScript in not configured correctly.
- C. Both parent and embedded OmniScripts have the same element name for the Set values element.
- D. The LWC PubSub Message flag in the Set Values action of the parent has not been set.
正解：D
質問 # 29
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed in the flyout?
Choose 2 answer
- A. An Integration Procedure
- B. A DataRaptor
- C. A Child FlexCard
- D. An OmniScript
正解：A、C
質問 # 30
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- B. Lookup Mode is selected in the properties of the Type Ahead Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- D. The typeHead key is not in the correct format.
正解：C
質問 # 31
A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.
Which factor would lead the developer to this decision?
- A. All instance of the FlexCard must be updated with the changes.
- B. The new and current versions will be displayed together on the same target.
- C. Another team member is developing new action, fields and styling for the current version of the FlexCard.
- D. The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.
正解：D
質問 # 32
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. Null
- B. 12.99
- C. 13.99
- D. 12.99,13.99
正解：C
質問 # 33
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?
- A. ResponseCart
- B. ResponseCartDebug
- C. Response
- D. FetchCart
正解：A
質問 # 34
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The flag passData.JSON in the parent OmniScript in not configured correctly.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- D. Both parent and embedded OmniScripts have the same element name for the Set Values element.
正解：B
質問 # 35
......
OmniStudioは、ビジネスが顧客向けにカスタマイズされたエクスペリエンスを作成できる強力なプラットフォームです。開発者がカスタマイズされたアプリ、ワークフロー、およびデータモデルを作成できるさまざまなツールを提供します。このプラットフォームは柔軟で使いやすく設計されており、あらゆる規模のビジネスに最適です。OmniStudioを使用することで、ビジネスは顧客のユニークなニーズと好みに合わせたパーソナライズされたエクスペリエンスを構築できます。
シミュレーションされた材料でOMS-435テストエンジンで学習：https://www.passtest.jp/Salesforce/OMS-435-shiken.html
合格には必要なるOMS-435試験問題集：https://drive.google.com/open?id=11PNLULdD3izWgpLsT16yQ66eOfJQSP38