最適な練習法にはSplunk SPLK-2002問題集で素晴らしいSPLK-2002試験問題PDF
更新された検証済みの合格させるSPLK-2002試験リアル問題と解答
SPLK-2002認定試験を受ける前に、候補者はまずSplunk認定管理者認定を取得する必要があります。この前提条件により、候補者がSplunkのコア機能と機能を確実に理解することが保証されます。また、候補者は、複雑なエンタープライズ環境でスプランク環境の設計と展開の経験がある必要があります。
SPLK-2002試験は、Splunk環境の設計と展開を担当するIT専門家のスキルと知識をテストするように設計されています。この試験では、アーキテクチャ、展開、データ管理、ユーザー管理、検索とレポート、トラブルシューティングなど、さまざまなトピックについて説明します。これは、Splunkを扱った経験があり、スキルを次のレベルに引き上げることを目指している個人を対象としています。
SPLK-2002認定は、データ分析とIT運用のキャリアを促進しようとする専門家にとって貴重な資産です。スプランクアーキテクチャと展開における卓越性の認識された基準を提供し、キャリアの成長と進歩のための新しい機会を開くことができます。
質問 # 66
A new Splunk customer is using syslog to collect data from their network devices on port 514. What is the best practice for ingesting this data into Splunk?
- A. Use a Splunk indexer to collect a network input on port 514 directly.
- B. Use a Splunk forwarder to collect the input on port 514 and forward the data.
- C. Configure syslog to send the data to multiple Splunk indexers.
- D. Configure syslog to write logs and use a Splunk forwarder to collect the logs.
正解：B
質問 # 67
What does setting site=site0 on all Search Head Cluster members do in a multi-site indexer cluster?
- A. Enables multisite search artifact replication.
- B. Enables automatic search site affinity discovery.
- C. Sets all members to dynamic captaincy.
- D. Disables search site affinity.
正解：D
質問 # 68
When adding or rejoining a member to a search head cluster, the following error is displayed:
Error pulling configurations from the search head cluster captain; consider performing a destructive configuration resync on this search head cluster member.
What corrective action should be taken?
- A. Run the splunk resync shcluster-replicated-config command on this member.
- B. Run the clean raft command on all members of the search head cluster.
- C. Restart the search head.
- D. Run the splunk apply shcluster-bundle command from the deployer.
正解：A
解説：
Explanation
https://community.splunk.com/t5/Deployment-Architecture/How-to-resolve-error-quot-Error-pulling-configurati
質問 # 69
Which of the following server. conf stanzas indicates the Indexer Discovery feature has not been fully configured (restart pending) on the Master Node?
- A.
- B.
- C.
- D.
正解：C
解説：
The Indexer Discovery feature enables forwarders to dynamically connect to the available peer nodes in an indexer cluster. To use this feature, the manager node must be configured with the [indexer_discovery] stanza and a pass4SymmKey value. The forwarders must also be configured with the same pass4SymmKey value and the master_uri of the manager node. The pass4SymmKey value must be encrypted using the splunk _encrypt command. Therefore, option A indicates that the Indexer Discovery feature has not been fully configured on the manager node, because the pass4SymmKey value is not encrypted. The other options are not related to the Indexer Discovery feature. Option B shows the configuration of a forwarder that is part of an indexer cluster.
Option C shows the configuration of a manager node that is part of an indexer cluster. Option D shows an invalid configuration of the [indexer_discovery] stanza, because the pass4SymmKey value is not encrypted and does not match the forwarders' pass4SymmKey value12
1: https://docs.splunk.com/Documentation/Splunk/9.1.2/Indexer/indexerdiscovery 2:
https://docs.splunk.com/Documentation/Splunk/9.1.2/Security/Secureyourconfigurationfiles#Encrypt_the_pass4S
質問 # 70
What log file would you search to verify if you suspect there is a problem interpreting a regular expression in a
monitor stanza?
- A. btool.log
- B. splunkd.log
- C. tailing_processor.log
- D. metrics.log
正解：B
解説：
Explanation/Reference: https://answers.splunk.com/answers/479312/how-to-edit-inputsconf-to-monitor-multiple-files-w-
1.html
質問 # 71
When adding or rejoining a member to a search head cluster, the following error is displayed:
Error pulling configurations from the search head cluster captain; consider performing a destructive
configuration resync on this search head cluster member.
What corrective action should be taken?
- A. Run the splunk resync shcluster-replicated-configcommand on this member.
- B. Run the splunk apply shcluster-bundlecommand from the deployer.
- C. Restart the search head.
- D. Run the clean raftcommand on all members of the search head cluster.
正解：B
質問 # 72
To reduce the captain's work load in a search head cluster, what setting will prevent scheduled searches from running on the captain?
- A. captain_is_adhoc_searchhead = true (on the current captain)
- B. captain_is_adhoc_searchhead = true (on all members)
- C. adhoc_searchhead = true (on the current captain)
- D. adhoc_searchhead = true (on all members)
正解：A
質問 # 73
Which of the following will cause the greatest reduction in disk size requirements for a cluster of N indexers running Splunk Enterprise Security?
- A. Setting the cluster replication factor to N-1.
- B. Increasing the number of buckets per index.
- C. Setting the cluster search factor to N-1.
- D. Decreasing the data model acceleration range.
正解：D
解説：
Explanation
Decreasing the data model acceleration range will reduce the disk size requirements for a cluster of indexers running Splunk Enterprise Security. Data model acceleration creates tsidx files that consume disk space on the indexers. Reducing the acceleration range will limit the amount of data that is accelerated and thus save disk space. Setting the cluster search factor or replication factor to N-1 will not reduce the disk size requirements, but rather increase the risk of data loss. Increasing the number of buckets per index will also increase the disk size requirements, as each bucket has a minimum size. For more information, see Data model acceleration and Bucket size in the Splunk documentation.
質問 # 74
As a best practice, where should the internal licensing logs be stored?
- A. Search head layer.
- B. License server.
- C. Indexing layer.
- D. Deployment layer.
正解：B
解説：
Explanation
As a best practice, the internal licensing logs should be stored on the license server. The license server is a Splunk instance that manages the distribution and enforcement of licenses in a Splunk deployment. The license server generates internal licensing logs that contain information about the license usage, violations, warnings, and pools. The internal licensing logs should be stored on the license server itself, because they are relevant to the license server's role and function. Storing the internal licensing logs on the license server also simplifies the license monitoring and troubleshooting process. The internal licensing logs should not be stored on the indexing layer, the deployment layer, or the search head layer, because they are not related to the roles and functions of these layers. Storing the internal licensing logs on these layers would also increase the network traffic and disk space consumption
質問 # 75
Which of the following statements describe search head clustering? (Select all that apply.)
- A. A deployer is required.
- B. At least three search heads are needed.
- C. The deployer must have sufficient CPU and network resources to process service requests and push configurations.
- D. Search heads must meet the high-performance reference server requirements.
正解：B、D
質問 # 76
In search head clustering, which of the following methods can you use to transfer captaincy to a different member? (Select all that apply.)
- A. Run the splunk transfer shcluster-captain command from the current captain.
- B. Run the splunk transfer shcluster-captain command from the member you would like to become the captain.
- C. Use the Monitoring Console.
- D. Use the Search Head Clustering settings menu from Splunk Web on any member.
正解：B、D
質問 # 77
When should multiple search pipelines be enabled?
- A. Only if running Splunk Enterprise version 6.6 or later.
- B. Only if there are fewer than twelve concurrent users.
- C. Only if CPU and memory resources are significantly under-utilized.
- D. Only if disk IOPS is at 800 or better.
正解：C
解説：
Explanation
Multiple search pipelines should be enabled only if CPU and memory resources are significantly under-utilized. Search pipelines are the processes that execute search commands and return results. Multiple search pipelines can improve the search performance by running concurrent searches in parallel. However, multiple search pipelines also consume more CPU and memory resources, which can affect the overall system performance. Therefore, multiple search pipelines should be enabled only if there are enough CPU and memory resources available, and if the system is not bottlenecked by disk I/O or network bandwidth. The number of concurrent users, the disk IOPS, and the Splunk Enterprise version are not relevant factors for enabling multiple search pipelines
質問 # 78
Which Splunk internal index contains license-related events?
- A. _internal
- B. _audit
- C. _license
- D. _introspection
正解：A
解説：
Explanation
The _internal index contains license-related events, such as the license usage, the license quota, the license pool, the license stack, and the license violations. These events are logged by the license manager in the license_usage.log file, which is part of the _internal index. The _audit index contains audit events, such as user actions, configuration changes, and search activity. These events are logged by the audit trail in the audit.log file, which is part of the _audit index. The _license index does not exist in Splunk, as the license-related events are stored in the _internal index. The _introspection index contains platform instrumentation data, such as the resource usage, the disk objects, the search activity, and the data ingestion. These data are logged by the introspection generator in various log files, such as resource_usage.log, disk_objects.log, search_activity.log, and data_ingestion.log, which are part of the _introspection index. For more information, see About Splunk Enterprise logging and [About the _internal index] in the Splunk documentation.
質問 # 79
What is the algorithm used to determine captaincy in a Splunk search head cluster?
- A. Rift distributed consensus.
- B. Raft distributed consensus.
- C. Round-robin distribution consensus.
- D. Rapt distributed consensus.
正解：B
解説：
Explanation
The algorithm used to determine captaincy in a Splunk search head cluster is Raft distributed consensus. Raft is a consensus algorithm that is used to elect a leader among a group of nodes in a distributed system. In a Splunk search head cluster, Raft is used to elect a captain among the cluster members. The captain is the cluster member that is responsible for coordinating the search activities, replicating the configurations and apps, and pushing the knowledge bundles to the search peers. The captain is dynamically elected based on various criteria, such as CPU load, network latency, and search load. The captain can change over time, depending on the availability and performance of the cluster members. Rapt, Rift, and Round-robin are not valid algorithms for determining captaincy in a Splunk search head cluster
質問 # 80
Because Splunk indexing is read/write intensive, it is important to select the appropriate disk storage solution for each deployment. Which of the following statements is accurate about disk storage?
- A. Virtualized environments are usually preferred over bare metal for Splunk indexers.
- B. The recommended RAID setup is RAID 10 (1 + 0).
- C. Enable NFS for storing hot and warm buckets.
- D. High performance SAN should never be used.
正解：B
解説：
Explanation
Splunk indexing is read/write intensive, as it involves reading data from various sources, writing data to disk, and reading data from disk for searching and reporting. Therefore, it is important to select the appropriate disk storage solution for each deployment, based on the performance, reliability, and cost requirements. The recommended RAID setup for Splunk indexers is RAID 10 (1 + 0), as it provides the best balance of performance and reliability. RAID 10 combines the advantages of RAID 1 (mirroring) and RAID 0 (striping), which means that it offers both data redundancy and data distribution. RAID 10 can tolerate multiple disk failures, as long as they are not in the same mirrored pair, and it can improve the read and write speed, as it can access multiple disks in parallel2 High performance SAN (Storage Area Network) can be used for Splunk indexers, but it is not recommended, as it is more expensive and complex than local disks. SAN also introduces additional network latency and dependency, which can affect the performance and availability of Splunk indexers. SAN is more suitable for Splunk search heads, as they are less read/write intensive and more CPU intensive2 NFS (Network File System) should not be used for storing hot and warm buckets, as it can cause data corruption, data loss, and performance degradation. NFS is a network-based file system that allows multiple clients to access the same files on a remote server. NFS is not compatible with Splunk index replication and search head clustering, as it can cause conflicts and inconsistencies among the Splunk instances. NFS is also slower and less reliable than local disks, as it depends on the network bandwidth and availability. NFS can be used for storing cold and frozen buckets, as they are less frequently accessed and less critical for Splunk operations2 Virtualized environments are not usually preferred over bare metal for Splunk indexers, as they can introduce additional overhead and complexity. Virtualized environments can affect the performance and reliability of Splunk indexers, as they share the physical resources and the network with other virtual machines. Virtualized environments can also complicate the monitoring and troubleshooting of Splunk indexers, as they add another layer of abstraction and configuration. Virtualized environments can be used for Splunk indexers, but they require careful planning and tuning to ensure optimal performance and availability2
質問 # 81
In the deployment planning process, when should a person identify who gets to see network data?
- A. Topology diagramming
- B. Data source inventory
- C. Data policy definition
- D. Deployment schedule
正解：B
質問 # 82
Indexing is slow and real-time search results are delayed in a Splunk environment with two indexers and one search head. There is ample CPU and memory available on the indexers. Which of the following is most likely to improve indexing performance?
- A. Increase the maximum number of hot buckets in indexes.conf
- B. Decrease the maximum concurrent scheduled searches in limits.conf
- C. Decrease the maximum size of the search pipelines in limits.conf
- D. Increase the number of parallel ingestion pipelines in server.conf
正解：D
解説：
Explanation
Increasing the number of parallel ingestion pipelines in server.conf is most likely to improve indexing performance when indexing is slow and real-time search results are delayed in a Splunk environment with two indexers and one search head. The parallel ingestion pipelines allow Splunk to process multiple data streams simultaneously, which increases the indexing throughput and reduces the indexing latency. Increasing the maximum number of hot buckets in indexes.conf will not improve indexing performance, but rather increase the disk space consumption and the bucket rolling time. Decreasing the maximum size of the search pipelines in limits.conf will not improve indexing performance, but rather reduce the search performance and the search concurrency. Decreasing the maximum concurrent scheduled searches in limits.conf will not improve indexing performance, but rather reduce the search capacity and the search availability. For more information, see Configure parallel ingestion pipelines in the Splunk documentation.
質問 # 83
......
更新されたPDF（2024年最新）実際にあるSplunk SPLK-2002試験問題：https://www.passtest.jp/Splunk/SPLK-2002-shiken.html
問題集返金保証付きのSPLK-2002問題集公式問題集：https://drive.google.com/open?id=1vU9BsBSOaubzrHTISTYeqb4KNCyhP2gN