検証済み！C-BYD15-1908問題集と解答でC-BYD15-1908テストエンジン正確解答付き
あなたを必ず合格させるC-BYD15-1908問題集PDF2024年最新のに更新された82問あります
SAP C-BYD15-1908認定試験は、ITプロフェッショナルの間でますます人気が高まっており、それによって彼らに求職市場での優位性を提供しています。この認定試験は、候補者が顧客向けにSAP Business ByDesignソリューションを実装および構成する必要なスキルと知識があることを示しています。さらに、候補者が実装プロセスを管理し、特定の顧客ニーズに適合するカスタマイズされたソリューションを提供する能力も検証されます。
SAP C-BYD15-1908試験は、SAPビジネスのByDesign実装の専門知識を獲得したいSAP専門家にとって不可欠な認証です。この認定では、SAP Business Bydesignソリューションの実装とカスタマイズにおける候補者の知識とスキルを評価します。また、財務管理、プロジェクト管理、サプライチェーン管理など、ビジネスプロセスのさまざまな側面もカバーしています。
質問 # 30
Which conditions must be fulfilled before you can complete the go-live readiness acceptance test? Note:
There are 2 correct answers to this question.
- A. Integration testing is complete.
- B. Unit testing is scheduled for completion.
- C. The implementation project team states that the system, people and data are ready to use SAP Business By Design.
- D. Testing is scheduled for completion.
正解：C、D
質問 # 31
Which of the following are prerequisites for managing inventory at a location (for internally-managed locations only)?
Note: There are 3 correct answers to this question.
- A. Maintain a logistics model for the location.
- B. Create a location layout for the location.
- C. Flag the location as 'Storage Location'.
- D. Flag a logistics area as 'Inventory Managed'.
- E. Create a storage control profile.
正解：A、C、E
質問 # 32
Which of the following steps in the production process can be automated with the help of "Automated Runs"?
Note: There are 2 correct answers to this question.
- A. Confirmation of production tasks
- B. Release of production orders
- C. Closing of production lots
- D. Finishing of production orders
正解：A、B
質問 # 33
You change an active project baseline and save it. Then, the system creates a new baseline.
What are the statuses of the previous baseline and new baseline?
- A. Previous baseline: "obsolete"
New baseline: "in planning" - B. Previous baseline: "active with pending changes"
New baseline: "in planning" - C. Previous baseline: "active with pending changes"
New baseline: "in approval" - D. Previous baseline: "obsolete"
New baseline: "active"
正解：B
解説：
The correct answer is A. Previous baseline: "active with pending changes" and New baseline: "in planning". When you change an active project baseline and save it, the system creates a new baseline with the status of "in planning". Meanwhile, the previous baseline is set to "active with pending changes" to indicate that changes were made to the baseline but they have not yet been incorporated into the project.
質問 # 34
Two companies "A" and "B" are setup in organizational management.
Which of the following options can you use as the account for the sales order in company "A", when selling goods to company "B"?
- A. The organizational unit representing company "B".
- B. The partner company corresponding to company "B".
- C. The site receiving the goods corresponding to company "B".
- D. The business partner corresponding to company "B".
正解：B
質問 # 35
How do you know if a Fine-Tuning setting will be copied from the initial test system to a new production system? Choose the correct answer.
- A. The Fine-Tuning activity is set to In Project.
- B. The Repetition Required field is set to No.
- C. The Move to Production Flag is set to Yes.
正解：B
質問 # 36
How can users change the number and date format preferences in SAP Business ByDesign? Choose the correct answer.
- A. Time and date formats cannot be changed.
- B. Users can create a change request to update their time and date format preferences.
- C. Time and date formats are based on the organizational structure's country.
- D. Users can set their number and date format preferences themselves.
正解：D
質問 # 37
What components does the Intelligent Enterprise consist of? Note: There are 3 correct answers to this question.
- A. Machine Learning
- B. Process Automation
- C. Intelligent Technology
- D. Intelligent Suite
- E. Digital Platform
正解：C、D、E
質問 # 38
What information must key users enter in their preferences before they forward incidents to SAP Business By Design support? Note: There are 2 correct answers to this question.
- A. Location and timezone
- B. Business role assignment
- C. Email
- D. Phone
正解：C、D
質問 # 39
Which of the following design characteristics apply to the user interface for SAP Business ByDesign?
Note: There are 2 correct answers to this question.
- A. The work center content is predefined and equal for all work centers.
- B. Users can reposition the navigation bar to the left, top or bottom of the screen.
- C. The layout of the user interface is consistent across all parts of the solution.
- D. Users can create shortcuts to specific work center views or common tasks.
正解：C、D
質問 # 40
Which of the following pricelists are delivered by SAP?
Note: There are 3 correct answers to this question.
- A. Base pricelist
- B. Customer-specific pricelist
- C. Quotation-specific pricelist
- D. Delivery-specific pricelist
- E. Company-specific pricelist
正解：A、B、D
解説：
These three pricelists are delivered by SAP and can be used to define prices for customers, as well as for deliveries and quotations. The customer-specific pricelist defines prices for individual customers, the base pricelist defines default prices, and the delivery-specific pricelist defines prices for specific deliveries. According to the SAP.com study resources (https://help.sap.com/viewer/3dbc3de4fa2542f3bd0c9a52f1c06d86/1905/en-US/f2070d5600d711dda6f400155d0f3d3c.html), these three pricelists are the only ones delivered by SAP.
質問 # 41
Which business scenarios does SAP Business ByDesign support for selling and executing services? Note:
There are 3 correct answers to this question.
- A. Over-the-Counter Sales
- B. Make-to-Order
- C. Field Service and Repair
- D. Selling Standardized Services
- E. Project-Based Services
正解：C、D、E
質問 # 42
How would you initiate a third-party order fulfillment process in the system? Choose the correct answer.
- A. By selecting "External" for the fulfillment field in a sales order item.
- B. By selecting "External" for the fulfillment field in the sales order logistics details in the Outbound Logistics Control work center.
- C. By selecting an externally managed location as the ship-from site in the sales order item.
- D. By selecting the "Source Of Supply Priority" rule as the procurement type in the planning tab of the material master.
正解：A
質問 # 43
Which reporting principles separate receivables and payables by profit center?
Note: There are 2 correct answers to this question.
- A. Profit center and segment reporting with balancing
- B. Profit center and segment reporting
- C. Profit center and segment reporting with splitting
- D. Profit center and segment reporting with clearing
正解：A、C
質問 # 44
In the business scenario "Intercompany Project Time and Expenses" you want a consultant from the selling company to record travel expenses.
In the buying company, you have already created a purchase order (PO) for the consultant in project "P". The system automatically creates a sales order (SO) and an intercompany project "IP" in the selling company. To enable travel expense recordings for the consultant, what is your next step?
- A. In the PO, create a limit item that is account-assigned to a task in project "P".
- B. In the SO, create an item of type "Expense - time and material (project)" that is linked to the intercompany project "IP".
- C. In the PO, create a limit item that is account-assigned to the intercompany project "IP".
- D. In the PO, create a service item with an expense product that is account-assigned to a task in project "P".
正解：D
質問 # 45
Which of the following options can you configure in the pricing procedure delivered from SAP?
Note: There are 2 correct answers to this question.
- A. Switch from net value based to net weight-based freights
- B. Switch of Tax calculation
- C. Manually overwrite a price condition in a document
- D. Set the currency code of the price component
正解：B、D
質問 # 46
Which inventory valuation methods are supported in SAP Business ByDesign? Note: There are 3 correct answers to this question.
- A. Moving average
- B. Last in, first out
- C. First in, first out
- D. Standard cost
- E. Actual costing
正解：A、D、E
質問 # 47
Which of the following master data is used as a source of supply, when a production request is created?
- A. Released Execution Production Model
- B. Production Bill of Operation
- C. Production Bill of Material
- D. Released Planning Production Model
正解：C
解説：
The master data used as a source of supply when a production request is created in SAP Business ByDesign are the released Planning Production Model and the Production Bill of Material. The Released Execution Production Model and the Production Bill of Operation are not used as a source of supply in this scenario. Reference: https://help.sap.com/viewer/4b90d3b2f01543698a15bbb7cdaa9071/1911/en-US/2514c5ef6d0c10149b605984b89c8b/content.htm
質問 # 48
Which of the following design characteristics apply to the user interface for SAP Business ByDesign?
Note: There are 2 correct answers to this question.
- A. Users can reposition the navigation bar to the left, top or bottom of the screen.
- B. The work center content is predefined and equal for all work centers.
- C. The layout of the user interface is consistent across all parts of the solution.
- D. Users can create shortcuts to specific work center views orcommon tasks.
正解：B、D
質問 # 49
Which cost rates does the system consider when it valuates internal project time recordings?
Note: There are 2 correct answers to this question.
- A. Service cost rate
- B. Labor resource cost rate
- C. Employee costrate
- D. Project-specific cost rate
正解：A、B
質問 # 50
In which of the following settings do you maintain the payment terms to be automatically determined in sales orders?
- A. In the account settings
- B. In the company settings
- C. In the product settings
- D. In the ship-from settings
正解：B
質問 # 51
Forwhich of the following business objects can you create invoice schedules in SAP Business ByDesign?
Note: There are 2 correct answers to this question.
- A. Service orders
- B. Contracts
- C. Opportunities
- D. Sales orders
正解：A、D
質問 # 52
A company needs to provide statutory reporting in local GAAP within its country of registration. In addition, IFRS statutory reports are necessary due to group reporting. Which one of the following approaches can achieve multi-GAAP reporting in SAP Business ByDesign? Choose the correct answer.
- A. Define one ledger for the local accounting principle and one ledger with an accounting principle IFRS.
- B. Close your accounting period in local GAAP and do adjustment postings to achieve IFRS.
- C. Define one company with a local accounting principle and one with an accounting principle IFRS.
- D. Define one set of books with a local accounting principle and one set of books with an accounting principle IFRS.
正解：D
質問 # 53
......
合格できるSAP C-BYD15-1908試験情報フリー練習テスト：https://www.passtest.jp/SAP/C-BYD15-1908-shiken.html
SAP C-BYD15-1908リアル試験問題と解答は無料で試せる：https://drive.google.com/open?id=146AguVXJRfH38Uke_62K1HUGwre_OT54