検証済みFCP_FAZ_AN-7.4問題集と解答で2025年最新のFCP_FAZ_AN-7.4をダウンロード
更新された100%カバー率リアルFCP_FAZ_AN-7.4試験問題で100%合格保証付いてます
Fortinet FCP_FAZ_AN-7.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 32
What allows one task to use the output of a previous task as its input?
- A. Trigger variables
- B. Exported tasks
- C. Trigger variables
- D. Output variables
正解：D
質問 # 33
The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.
What can be the reason for this failure?
- A. ADOMs are not enabled on FortiAnalyzer.
- B. FortiAnalyzer is in an HA cluster.
- C. A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.
- D. ADOM mode should be set to advanced, in order to register the FortiClient EMS device.
正解：A
質問 # 34
Exhibit.
Laptop1 is used by severaladministratorsto manage FotiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than admin'', and coming from Laptop1.
Which filter will achieve the desired result?
- A. Operation-login and srcip== 10.1.1.100 and dstip==10.1.1.1.210 and user==admin
- B. Operation-login and performed_on==''GU(10.1.1.120)' and user!=admin
- C. Operation-login and performed_on==''GUI(10.1.1.100)' and user!=admin
- D. Operation-login and dstip==10.1.1.210 and user!-admin
正解：C
解説：
The objective is to create a filter that identifies all login attempts to the FortiAnalyzer web interface (GUI) coming fromLaptop1(IP 10.1.1.100) and excludes the admin user. This filter should match any user other than admin.
* Filter Components Analysis:
* Operation-login: This portion of the filter will target login actions specifically, which is correct for filtering login attempts.
* performed_on==''GUI(10.1.1.100)': This indicates that the login attempt must occur on the GUI interface and originate from the specified IP, which matches Laptop1's IP address (10.1.1.100). This ensures that the filter only matches GUI logins from this specific device.
* user!=admin: This part excludes logins by the admin user, meeting the requirement to capture only non-admin users.
* Option Analysis:
* Option A: Correctly specifies theOperation-login,performed_on==''GUI(10.1.1.100)', and user!=admin. This setup effectively filters login attempts to the GUI from Laptop1, excluding the admin user.
* Option B: Uses the incorrect IP 10.1.1.120 in the performed_on filter, which does not match Laptop1's IP (10.1.1.100).
* Option C: This option includessrcip==10.1.1.100anddstip==10.1.1.210but incorrectly specifies user==admininstead ofuser!=admin, which does not match the requirement to exclude admin users.
* Option D: This option does not specify theperformed_onfield to restrict it to the GUI and only includesdstip(destination IP) withoutsrcip. It also incorrectly uses user!-admin instead of the correct syntaxuser!=admin.
Conclusion:
* Correct Answer:A. Operation-login and performed_on==''GUI(10.1.1.100)' and user!=admin
* This filter precisely captures the required conditions: login attempts from Laptop1 to the GUI interface by any user except admin.
References:
* FortiAnalyzer 7.4.1 documentation on log filters, syntax for login operations, and GUI login tracking.
質問 # 35
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy.
What is the most likely problem?
- A. CPU resources are too high.
- B. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
- C. The total disk space is insufficient and you need to add other disk.
- D. The ADOM disk quota is set too low based on log rates.
正解：D
質問 # 36
What are two benefits of using fabric connectors? (Choose two.)
- A. Fabric connectors allow you to improve redundancy.
- B. You do not need an additional license to send logs to the cloud platform.
- C. They allow FortiAnalyzer to send logs in real-time to public cloud accounts.
- D. Using fabric connectors is more efficient than using third-party polling with API.
正解：A、C
質問 # 37
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
- A. Logs from registered devices
- B. Report information
- C. Database snapshot
- D. System information
正解：B、D
質問 # 38
What should you always do after erasing the FortiAnalyzer configuration on flash?
- A. Run the execute reset all-settings command
- B. Perform a system backup
- C. Run the execute reboot command
- D. Run the execute format disk command
正解：D
質問 # 39
After a generated a repot, you notice the information you were expecting to see in not included in it. However, you confirm that the logs are there:
Which two actions should you perform? (Choose two.)
- A. Disable auto-cache.
- B. Check the time frame covered by the report.
- C. Test the dataset.
- D. Increase the report utilization quota.
正解：B、C
解説：
When a generated report does not include the expected information despite the logs being present, there are several factors to check to ensure accurate data representation in the report.
Option A - Check the Time Frame Covered by the Report:
Reports are generated based on a specified time frame. If the time frame does not encompass the period when the relevant logs were collected, those logs will not appear in the report. Ensuring the time frame is correctly set to cover the intended logs is crucial for accurate report content.
Conclusion: Correct.
Option B - Disable Auto-Cache:
Auto-cache is a feature in FortiAnalyzer that helps optimize report generation by using cached data for frequently used datasets. Disabling auto-cache is generally not necessary unless there is an issue with outdated data being used. In most cases, it does not directly impact whether certain logs are included in a report.
Conclusion: Incorrect.
Option C - Increase the Report Utilization Quota:
The report utilization quota controls the resource limits for generating reports. While insufficient quota might prevent a report from generating or completing, it does not typically cause specific log entries to be missing. Therefore, this option is not directly relevant to missing data within the report.
Conclusion: Incorrect.
Option D - Test the Dataset:
Datasets in FortiAnalyzer define which logs and fields are pulled into the report. If a dataset is misconfigured, it could exclude certain logs. Testing the dataset helps verify that the correct data is being pulled and that all required logs are included in the report parameters.
Conclusion: Correct.
Conclusion:
Correct Answe r : A. Check the time frame covered by the report and D. Test the dataset.
These actions directly address the issues that could cause missing information in a report when logs are available but not displayed.
Reference:
FortiAnalyzer 7.4.1 documentation on report generation settings, time frames, and dataset configuration.
質問 # 40
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. oftpd
- B. logfiled
- C. sqlplugind
- D. miglogd
正解：D
質問 # 41
Why must you wait for several minutes before you run a playbook that you just created?
- A. FortiAnalyzer needs that time to back up the current playbooks.
- B. FortiAnalyzer needs that time to parse the new playbook.
- C. FortiAnalyzer needs that time to debug the new playbook.
- D. FortiAnalyzer needs that time to ensure there are no other playbooks running.
正解：B
質問 # 42
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security?
- A. Threat hunting
- B. Outbreak alert services
- C. Incidents dashboard
- D. FortiView Monitor
正解：A
解説：
FortiAnalyzer offers several features for monitoring, alerting, and incident management, each serving different purposes. Let's examine each option to determine which one best supports a proactive security approach.
Option A - FortiView Monitor:
FortiView is a visualization tool that provides real-time and historical insights into network traffic, threats, and logs. While it gives visibility into network activity, it is generally more reactive than proactive, as it relies on existing log data and incidents.
Conclusion: Incorrect.
Option B - Outbreak Alert Services:
Outbreak Alert Services in FortiAnalyzer notify administrators of emerging threats and outbreaks based on FortiGuard intelligence. This is beneficial for awareness of potential threats but does not offer a hands-on, investigative approach. It's more of a notification service rather than an active, proactive investigation tool.
Conclusion: Incorrect.
Option C - Incidents Dashboard:
The Incidents Dashboard provides a summary of incidents and current security statuses within the network. While it assists with ongoing incident response, it is used to manage and track existing incidents rather than proactively identifying new threats.
Conclusion: Incorrect.
Option D - Threat Hunting:
Threat Hunting in FortiAnalyzer enables security analysts to actively search for hidden threats or malicious activities within the network by leveraging historical data, analytics, and intelligence. This is a proactive approach as it allows analysts to seek out threats before they escalate into incidents.
Conclusion: Correct.
Conclusion:
Correct Answe r : D. Threat hunting
Threat hunting is the most proactive feature among the options, as it involves actively searching for threats within the network rather than reacting to already detected incidents.
Reference:
FortiAnalyzer 7.4.1 documentation on Threat Hunting and proactive security measures.
質問 # 43
A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on FortiAnalyzer.
What can you do on FortiAnalyzer to accomplish this?
- A. Click Log View and generate a report for that administrator.
- B. Click Task Monitor and view the tasks performed by that administrator.
- C. Click FortiView and generate a report for that administrator.
- D. Click Fabric View and view the tasks performed by the rogue administrator.
正解：B
質問 # 44
Exhibit.
Which statement about the event displayed is correct?
- A. The risk source is isolated.
- B. An incident was created from this event.
- C. The security risk was blocked or dropped.
- D. The security event risk is considered open.
正解：C
解説：
In FortiOS and FortiAnalyzer logging systems, when an event has a status of "Mitigated" in the Event Status column, it typically indicates that the system took action to address the identified threat. In this case, the Web Filter blocked the web request to a suspicious destination, and the event status "Mitigated" confirms that the action was successfully implemented to neutralize or block the security risk.
Let's review the answer options:
Option A: The risk source is isolated.
This is incorrect because "isolated" would imply that FortiGate took further steps to prevent the source device from communicating with the network. There is no indication of isolation in this event status.
Option B: The security risk was blocked or dropped.
This is correct. The "Mitigated" status, along with the Web Filter event type and the accompanying description, implies that the FortiGate or FortiAnalyzer successfully blocked or dropped the suspicious web request, which corresponds to the term "mitigated." Option C: The security event risk is considered open.
This is incorrect because an open status would indicate that no action was taken, or the threat is still present. The "Mitigated" status indicates that the threat has been addressed.
Option D: An incident was created from this event.
This option is not correct or evident based on the given display. Although FortiAnalyzer or FortiGate could escalate certain events to incidents, this is not indicated here.
Reference:
The FortiOS 7.4.1 and FortiAnalyzer 7.4.1 documentation specify that "Mitigated" status in logs means the identified threat was handled, usually by blocking or dropping the action associated with the event, particularly with Web Filter and Security Policy logs.
質問 # 45
Which statement describes archive logs on FortiAnalyzer?
- A. Logs that are indexed and stored in the SQL database
- B. Logs compressed and saved in files with the .gz extension
- C. Logs a FortiAnalyzer administrator can access in FortiView
- D. Logs previously collected from devices that are offline
正解：B
解説：
In FortiAnalyzer, archive logs refer to logs that have been compressed and stored to save space. This process involves compressing the raw log files into the .gz format, which is a common compression format used in Fortinet systems for archived data. Archiving is essential in FortiAnalyzer to optimize storage and manage long-term retention of logs without impacting performance.
Let's examine each option for clarity:
Option A: Logs that are indexed and stored in the SQL database
This is incorrect. While some logs are indexed and stored in an SQL database for quick access and searchability, these are not classified as archive logs. Archived logs are typically moved out of the database and compressed.
Option B: Logs a FortiAnalyzer administrator can access in FortiView
This is incorrect because FortiView primarily accesses logs that are active and indexed, not archived logs. Archived logs are stored for long-term retention but are not readily available for immediate analysis in FortiView.
Option C: Logs compressed and saved in files with the .gz extension
This is correct. Archive logs on FortiAnalyzer are stored in compressed .gz files to reduce space usage. This archived format is used for logs that are no longer immediately needed in the SQL database but are retained for historical or compliance purposes.
Option D: Logs previously collected from devices that are offline
This is incorrect. Although archived logs may include data from devices that are no longer online, this is not a defining characteristic of archive logs.
質問 # 46
Which statement about automation connectors in FortiAnalyzer is true?
- A. The local connector becomes available after you configured any external connector.
- B. An ADOM with the Fabric type comes with multiple connectors configured.
- C. The actions available with FortiOS connectors are determined by automation rules configured on FortiGate.
- D. The local connector becomes available after you connectors are displayed.
正解：C
質問 # 47
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin" and coming from Laptop1.
Which filter will achieve the desired result?
- A. operation-login & dstip==10.1.1.210 & userl-admin
- B. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
- C. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- D. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
正解：C
質問 # 48
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?
- A. Fortinet is assigned the Restricted_ User administrator profile.
- B. Fortinet is assigned the Standard_ User administrator profile.
- C. ADOM mode is configured with Advanced mode.
- D. A trusted host is configured.
正解：B
質問 # 49
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To encrypt log communications
- C. To add the MD's hash value and authentication code
- D. To add a unique tag to each log to prove that it came from this FortiAnalyzer
正解：A
質問 # 50
Exhibit.
Based on the partial outputs displayed, which devices can be members of a FotiAnalyzer Fabric?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. FortiAnalyzer2 and FortiAnalyzer3
- C. All devices listed can be members.
- D. FortiAnalayzer1 and FortiAnalyzer3
正解：C
解説：
In a FortiAnalyzer Fabric, devices can participate in a cluster or grouping if they meet specific compatibility criteria. Based on the outputs provided, let's evaluate these criteria:
* Version Compatibility:
* All three devices, FortiAnalyzer1, FortiAnalyzer2, and FortiAnalyzer3, are runningversion v7.
4.1-build0238, which is the same across the board. This version alignment is crucial because FortiAnalyzer Fabric requires that devices run compatible firmware versions for seamless communication and management.
* Platform Type and Configuration:
* All three devices are configured asStandalonein the HA mode, which allows them to operate independently but does not restrict their participation in a FortiAnalyzer Fabric. Each device is also on theFAZVM64-KVMplatform type, ensuring hardware compatibility.
* Global Settings:
* Key settings such as adm-mode, adm-status, and adom-mode are consistent across all devices (adm-mode: normal, adm-status: enable, adom-mode: normal), which aligns with requirements for fabric integration and role assignment flexibility.
* Each device also has thelog-forward-cache-sizeset, which is relevant for forwarding logs within a fabric environment.
Based on the above analysis,all devices(FortiAnalyzer1, FortiAnalyzer2, and FortiAnalyzer3) meet the requirements to be part of a FortiAnalyzer Fabric.
References: FortiAnalyzer 7.4.1 documentation outlines that devices within a FortiAnalyzer Fabric should be on the same or compatible firmware versions and hardware platforms, and they must be configured for integration. Given that all devices match the version, platform, and mode criteria, they can all be part of the FortiAnalyzer Fabric.
質問 # 51
......
リアル問題集で100%無料FCP_FAZ_AN-7.4試験問題集を試そう：https://www.passtest.jp/Fortinet/FCP_FAZ_AN-7.4-shiken.html
実際のFCP_FAZ_AN-7.4問題集最新練習テスト問題集：https://drive.google.com/open?id=1b2UwwWNmYxeGtryEZOdovZP1UVVH8H_0