正真正銘のベスト試験材料は1Z0-1045-21テストエンジン練習試験合格させます
[2022年更新]1Z0-1045-21のPDF問題、完璧に練習問題で合格
質問 10
The above diagram shows a typical Third Party Logistics (3PL) structure.
Identify the Facility, Company, and User levels, as applicable, in sequential order (that is, the proper label for box 1 is listed 1stin sequence).
- A. 1=Super User, 2=Parent 3PL, 3=Company 1, 4=Facility 1, 5-Facility 2, 6=Facility 3, 7=Facility 4
- B. 1=Parent 3PL, 2=Facility 1,3=Facility 2, 4=Company 1, 5=Company 2, 6=Company 3, 7=Company 1
- C. 1=Facility 1, 2=Company 1, 3=Company 2, 4=Super User 1, 5=Facility 2, 6=Facility 3, 7=Facility 4
- D. 1=Company 1, 2=Parent 3PL, 3=Company 2, 4=Facility 1, 5=Facility 2, 6=Facility 3,7=Facility 4
正解: D
質問 11
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules created at Parent company view can be edited at Child company view.
- B. Replenishment Rules are used for defining Wave Template.
- C. Replenishment Rules areused for Inventory movement between two warehouses.
- D. Replenishment Rules are only editable at the company level in which it was created.
正解: B
質問 12
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statementsare correct related to the Purchase order update? (Choose two.)
- A. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- B. The Purchase order header canbe updated by sending an UPDATE action code when the status is in Created and Received.
- C. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
- D. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- E. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
正解: B,E
質問 13
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
* For active Location P20A100
* Minimum Volume = 20
* Max Volume = 100
* Percentage of Max = 20%
* Length = 20, Width = 40, Height = 60
* If location P20A100 total volume goes below 20, the location is triggered forreplenishment
- A. Reactive
- B. Percentage of Max
- C. Order Based
- D. Minimum Capacity
正解: B
質問 14
Why is it necessary to have a consolidation location?
- A. It is necessary if you want to consolidate while packing.
- B. Packing using a Distribution transaction requires a consolidation location for each store.
- C. After you arefinished picking your pick cart, you use a consolidation location to pack.
- D. Consolidation locations are used to consolidate orders for a wave.
正解: C
質問 15
While working on the configuration of your client, you uncover that the ASNs will always have the correct serial number information interfaced upfront and your client trusts the ASN information. Your client also needs the serial number information to get into WMS Cloud when the items are received from POs.
Which three actions do you need to take, assuming that item A is serial-tracked? (Choose three.)
- A. Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.
- B. Set item A's require serial number parameter to "Required, validate and allow user override".
- C. Set item A's require serial number parameter to "Required, don't Validate".
- D. Create the Serial Number barcodetype.
- E. Create the IB Container barcode type.
正解: A,B,E
質問 16
In WMS Cloud, which two statements are true about WMS BI Cloud? (Choose two.)
- A. Tables in WMS BI Cloud are referred to as categories
- B. WMS BI Cloud is availablefor use out of the box
- C. WMS BI Cloud allows users to create reports by creating SQL queries
- D. By default, the WMS BI Cloud functionality is disabled
正解: A,D
質問 17
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lockcode rather than the expected "LL" code.
Which scenario is causing this issue?
- A. Oneof your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- B. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- C. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
- D. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- E. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
正解: E
質問 18
Select the two routing configurations thatare used to specify routes for outbound loads. (Choose two.)
- A. the Routing Mode on the Wave Template
- B. the Routing Mode on the Carrier UI Screen
- C. the Routing_Mode parameter on the Loading RF Transaction
- D. the company parameter PACKING_ROUTING_MODE
正解: B,C
質問 19
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quicklypick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create a Flow Through process and configure each customer's address as a "Designation Location"
- B. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
- C. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- D. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO sequence.
- E. Change the Order Type to "Rush" and wave it because the customer is waiting.
正解: C
質問 20
Identify two correct statements about ASN creation. (Choose two.)
- A. The ASN number is always auto-generated from a sequence number.
- B. Oracle WMS Cloud allows creation of a single/multiple ASN from a PO.
- C. The ASN number canbe system generated or manually entered.
- D. Oracle WMS Cloud only allows creation of a single ASN from a PO.
正解: B,C
質問 21
Your customer wants to have the Purchase order created in their legacy ERP system and download it to Oracle WMS Cloud.
Identify four mandatory field values that must be present in the Purchase order to be successfully downloaded to the WMS Cloudsystem. (Choose four.)
- A. Purchase Order Number
- B. IB Shipment
- C. License Plate Number
- D. item
- E. Vendor code
- F. Ship Date
- G. Item Quantity
正解: A,D,E,G
質問 22
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What stepshould they perform?
- A. When interfacing the shipment, the PO number should be specified
- B. Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen
- C. The user needs to go to the Purchase Order Screen UI and select the "Create IB Shipment" check box
- D. When interfacing the PO, the "create_asn" check box needs to be selected every time
正解: B
質問 23
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. The from-IBLPNand the to-IBLPN might be received against two different ASNs respectively.
- B. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- C. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
- D. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- E. This error message will disappear if the RF screen parameter split-uom is left bank.
正解: C,D,E
質問 24
Which two packing transactions do not require you to open up an IB LPN (Everything will go in the box)?
(Choose two.)
- A. Pick Cart Transaction
- B. PackLPN Transaction
- C. PackNC Transaction
- D. Distribution Transaction
正解: A,B
質問 25
During which of the following three scenarios does the WMS validate or throw an error message during picking witha serial number tracking execution? (Choose three.)
- A. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is currently linked to another Inventory Record for the facility.
- B. When the scanned serial number is present in the scanned IB LPNor active location and also exists for another item in stock in the current facility.
- C. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is present for a different facility.
- D. When the same serial number, which is already present on the same Sku in a different facility, is scanned.
- E. When the scanned serial number, which is associated with an OBLPN in shipped status for a different facility, is not found for the current facility.
正解: B,C,D
質問 26
......
ベスト最新資料は1Z0-1045-21オンライン練習試験：https://www.passtest.jp/Oracle/1Z0-1045-21-shiken.html