無料Enterprise Data Management 1z0-1086-22究極の学習ガイド（更新された60問あります) [Q17-Q42]

無料Enterprise Data Management 1z0-1086-22究極の学習ガイド（更新された60問あります)

トップクラスの1z0-1086-22練習試験問題

質問 # 17
Which three statements are true about an alternate viewpoint in an unbound state7

• A. The alternate viewpoint is not used in a binding and all of the data chain objects that it contains have a binding status of Unbound.
• B. The alternate viewpoint is not used in a binding, but all of the data chain objects that it contains have a binding status of Bound.
• C. The alternate viewpoint may be partially bound if it shares data chain objects with a bound viewpoint.
• D. Unbound data objects in an alternate viewpoint enable you to model and evaluate potential changes to dimensions in cases where the changes would not conform to a dimension's current binding rules.
• E. You cannot use the alternate viewpoint to construct a what-if scenario that is isolated from production.

正解：A、C

解説：
Explanation
An alternate viewpoint is a viewpoint that lets you see enterprise data organized in a different way. Nodes can be aggregated, rolled up, or summarized using a hierarchy that differs from the hierarchy in the bound viewpoint. An alternate viewpoint can be in an unbound state or a partially bound state. The following statements are true about an alternate viewpoint in an unbound state: the alternate viewpoint is not used in a binding and all of the data chain objects that it contains have a binding status of Unbound; unbound data objects in an alternate viewpoint enable you to model and evaluate potential changes to dimensions in cases where the changes would not conform to a dimension's current binding rules; the alternate viewpoint may be partially bound if it shares data chain objects with a bound viewpoint. The following statements are false about an alternate viewpoint in an unbound state: the alternate viewpoint is not used in a binding, but all of the data chain objects that it contains have a binding status of Bound; you cannot use the alternate viewpoint to construct a what-if scenario that is isolated from production. An unbound alternate viewpoint does not have any bound data objects, because it is not related to any external applications. You can use an unbound alternate viewpoint to construct a what-if scenario that is isolated from production, because it does not affect the bound viewpoint or the external applications. References: Defining AlternateViewpoints - Oracle Help Center1; Understanding Bindings and Bound Data Objects - Oracle Help Center2

質問 # 18
Which two items describe the information that you can find in the Custom Validation Report?

• A. A list of all manually created validations across all applications
• B. The date and status of the last time a validation was run
• C. The actions and properties that trigger the validation check
• D. A list of system and application-specific validations

正解：C、D

解説：
Explanation
The Custom Validation Report is a report that lists all the custom validations that have been created for an application. The report includes information such as: the actions and properties that trigger the validation check, the validation rule expression and message, the node types and hierarchy sets that use the validation, and whether the validation is enabled or disabled. The report does not include a list of all manually created validations across all applications, because it is specific to one application at a time. The report does not include a list of system and application-specific validations, because these are predefined validations that cannot be customized. The report does not include the date and status of the last time a validation was run, because this information is available in the request history or subscription history. References: Working with Custom Validations - Oracle Help Center

質問 # 19
A request has a status of "In Flight." In which stage of the approval workflow is the request?

• A. Approve
• B. Submit
• C. Review
• D. Closed

正解：A

解説：
* Approve: This option is correct because when a request has a status of "In Flight", it means that it is in the Approve stage of the approval workflow, where it is waiting for approvals from the approvers or data managers.

質問 # 20
Which three tasks can be performed by a user with the Data Manager permission on an application?

• A. Manage the application's node sets, hierarchy sets, and node types.
• B. Assign permissions for the application data.
• C. Import, export, and update data for all dimensions in the application.
• D. Manage viewpoints and viewpoint subscriptions for all dimensions in the application.
• E. Create and submit requests for dimensions in the application.

正解：C、D、E

解説：
Explanation
The Data Manager permission is the second highest level of permission that can be assigned to an application.
Users with the Data Manager permission can perform various tasks such as: import, export, and update data for all dimensions in the application, create and submit requests for dimensions in the application, manage viewpoints and viewpoint subscriptions for all dimensions in the application, run business rules on dimensions in the application, copy data across dimensions in the application, etc. Users with the Data Manager permission cannot manage the application's node sets, hierarchy sets, and node types, because these are data objects that require Owner permission to manage. Users with the Data Manager permissioncannot assign permissions for the application data, because this requires Owner permission as well. References: Working with Permissions - Oracle Help Center ; Working with Requests - Oracle Help Center3

質問 # 21
Which two things occur during application registration7

• A. You select an Enterprise Data Management Cloud application type.
• B. The system generates connections to external applications.
• C. You load dimension data from flat files.
• D. The system imports external application data to determine the application configuration.
• E. The system generates default data objects based on your selections in the registration wizard.

正解：A、E

解説：
According to the Oracle documentation, application registration is the process of creating an Enterprise Data Management Cloud application and defining its configuration. During application registration, you select an application type and the system generates default data objects based on your selections in the registration wizard. The system does not generate connections to external applications, import external application data, or load dimension data from flat files during application registration. These tasks are performed separately after the application is registered.

質問 # 22
You are mapping nodes from dimensions in two source applications to a dimension in a single target application.
How do you set up the mapping hierarchy sets?

• A. Target nodes and converted source nodes in two separate hierarchies
• B. Target nodes as parents and converted source nodes as children
• C. Separate hierarchy sets for each source-to-target relationship
• D. Target nodes in one hierarchy set and converted source nodes in a separate hierarchy set

正解：C

解説：
When you are mapping nodes from dimensions in two source applications to a dimension in a single target application, you need to set up separate hierarchy sets for each source-to-target relationship. This way, you can define the mapping rules and node type converters for each source node type and target node type pair. You cannot use target nodes and converted source nodes in two separate hierarchies, because this would not establish a mapping relationship between them. You cannot use target nodes in one hierarchy set and converted source nodes in a separate hierarchy set, because this would not allow you to export the mappings to the target application. You cannot use target nodes as parents and converted source nodes as children, because this would create a hierarchical relationship instead of a mapping relationship. Reference: Working with Hierarchy Sets - Oracle Help Center1; Creating Mapping Viewpoints - Oracle Help Center2

質問 # 23
Approval Policy definition: Markfo
* Approval Method = Parallel
* One Approval Per Group = NOT selected
* Total Required approvals = 4
Approvers:
* Group 1: User1, User2, User3
* Group 2: User4, User5, User6
* Group 3: User3, User8, User9
Given the above approval policy and approvers, which statement correctly describes how the approvals workflow is enacted?

• A. Members of the three approval groups can approve in any order, and approvals are not required from all three groups as long as the total required number of approvals is met.
• B. Every member of the three approval groups must approve, but can do so in any order.
• C. Members of the first approval group can approve in any order, but must provide at least one approval before the workflow moves to the second approval group.
• D. Members of the three approval groups can approve in any order, and at least one approval is required from each group to meet the required number of approvals.

正解：A

解説：
* This option is correct because when the approval method is parallel and one approval per group is not selected, the approvers from different groups can approve in any order and the request is approved when the total required number of approvals is met, regardless of which groups they belong to.

質問 # 24
You have a maintenance view that consists of the following viewpoints from different applications: GL Accounts, Consolidation Accounts, and Planning Accounts. You open a request and manually add a new account to GL Accounts.
In the same request, which two methods can you use to add the account to the other two viewpoints7

• A. Compare and align: Run a comparison between the viewpoints to identify missing nodes. Search for the appropriate parents in the other viewpoints before dragging and dropping the new node to insert it into the other viewpoints.
• B. Share manually: Drag and drop the new node from the GL Accounts viewpoint to the Consolidation and Planning viewpoints, after manually identifying the appropriate parents.
• C. Automatic insert: Select the new node and run the auto-insert tool to automatically identify comparable parents in the other viewpoints and insert the new node under them.
• D. Master alignment: Create a fourth viewpoint that represents a master combined account dimension and add the node there to insert it into all three applications.

正解：A、B

解説：
Explanation
If you have a maintenance view that consists of viewpoints from different applications, and you open a request and manually add a new node to one of the viewpoints, you can use two methods to add the node to the other viewpoints: share manually or compare and align. Share manually means dragging and dropping the new node from one viewpoint to another viewpoint, after manually identifying the appropriate parents. This way, you can create new nodes in the target viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. Compare and align means running a comparison between the viewpoints to identify missing nodes, then searching for the appropriate parents in the target viewpoint before dragging and dropping the new node to insert it into the target viewpoint. This way, you can also create new nodes in the target viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. You cannot use master alignment or automatic insert methods, because these are not supported by Oracle Enterprise Data Management Cloud. References: Working with Requests - Oracle Help Center3; Comparing Viewpoints - Oracle Help Center

質問 # 25
Which three tasks can be performed by a user with the Data Manager permission on an application?

• A. Manage the application's node sets, hierarchy sets, and node types.
• B. Assign permissions for the application data.
• C. Import, export, and update data for all dimensions in the application.
• D. Manage viewpoints and viewpoint subscriptions for all dimensions in the application.
• E. Create and submit requests for dimensions in the application.

正解：C、D、E

解説：
The Data Manager permission is the second highest level of permission that can be assigned to an application. Users with the Data Manager permission can perform various tasks such as: import, export, and update data for all dimensions in the application, create and submit requests for dimensions in the application, manage viewpoints and viewpoint subscriptions for all dimensions in the application, run business rules on dimensions in the application, copy data across dimensions in the application, etc. Users with the Data Manager permission cannot manage the application's node sets, hierarchy sets, and node types, because these are data objects that require Owner permission to manage. Users with the Data Manager permission cannot assign permissions for the application data, because this requires Owner permission as well. Reference: Working with Permissions - Oracle Help Center1; Working with Requests - Oracle Help Center3

質問 # 26
Which three statements are true about lookup sets? (Select Three)

• A. You can use lookup sets to group and filter nodes.
• B. Lookup sets associate source values, or keys, with target values.
• C. Lookup sets are created during application registration.
• D. Keys and values in a lookup set can be configured for one or more applications.
• E. You use lookup sets in expressions for deriving properties or transforming properties in node type converters.

正解：B、D、E

解説：
Lookup sets are used to associate source values, or keys, with target values that can be used in expressions for deriving properties or transforming properties in node type converters. You can configure keys and values in a lookup set for one or more applications. Lookup sets are not created during application registration, but rather as separate objects that can be shared across applications. Lookup sets are not used to group and filter nodes, but rather to map values between different applications or perspectives. Reference: Working with Lookup Sets - Oracle Help Center2

質問 # 27
In a maintenance view for mappings, you compare the source and mapping viewpoints to identify nodes that exist in the source but have not been mapped to the target.
What is the next step to define mappings?

• A. Open a request, add nodes to the target viewpoint, and assign the mapping key to the new nodes.
• B. Run the mapping utility to relate source to target nodes.
• C. Create a request, then drag and drop nodes from the source to the mapping viewpoint.
• D. Using the appropriate mapping key, import an Excel mapping file.

正解：C

解説：
In a maintenance view for mappings, you can compare the source and mapping viewpoints to identify nodes that exist in the source but have not been mapped to the target. The next step to define mappings is to create a request, then drag and drop nodes from the source to the mapping viewpoint. This way, you can create new nodes in the mapping viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. You do not need to use an Excel mapping file, run a mapping utility, or open a request and add nodes to the target viewpoint, because these are not supported methods for defining mappings in Oracle Enterprise Data Management Cloud. Reference: Working with Requests - Oracle Help Center3; Creating Mapping Viewpoints - Oracle Help Center2

質問 # 28
Which two statements are true about requests?

• A. Requests are the mechanism that you use to apply changes to data.
• B. You can perform data changes across multiple views and submit all those changes together in the same request.
• C. You cannot make multiple changes to the same node in the same request.
• D. When you create a request, data changes are not applied immediately.

正解：A、D

解説：
1. Requests are the mechanism that you use to apply changes to data: This option is correct because requests are the way that you make changes to enterprise data in Enterprise Data Management Cloud. Requests can contain various types of data changes, such as adding, deleting, or editing nodes or properties.
2. When you create a request, data changes are not applied immediately: This option is correct because when you create a request, the data changes are not applied to the viewpoints until the request is submitted and approved. You can review and modify the request items before submitting them.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/working-with-requests.html

質問 # 29
In your application, you have nodes for cost centers. You want to group them two ways: by department and geography.
What are two ways to accomplish this?

• A. Create two node sets; one with a group of departments and another with a group of geographical regions.
• B. Create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children.
• C. Create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers.
• D. Create a list viewpoint for cost centers, then add parents for departments and geography.

正解：B、C

解説：
Hierarchy sets define nodes' parent-child relationships. You can use hierarchy sets to organize nodes into different hierarchies based on business needs or perspectives. One way to group cost centers by department and geography is to create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers. Another way is to create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children. Shared nodes allow the same nodes to exist multiple times in the hierarchy set. You cannot use a list viewpoint or node sets to group cost centers by department and geography, because they do not define parent-child relationships or hierarchies. Reference: Working with Hierarchy Sets - Oracle Help Center

質問 # 30
Which three tasks can you automate with EPM Automate?

• A. Export and import snapshots
• B. Recreate service
• C. Create and auto-submit change requests
• D. Archive backups
• E. Import and export dimensions

正解：A、D、E

解説：
EPM Automate enables users to remotely perform tasks within Oracle Enterprise Performance Management Cloud environments. Some of the tasks that can be automated are: archive backups, import and export metadata, data, artifact and application snapshots, templates, and Data Management mappings; upload and download files; run business rules; copy data; and export and import snapshots. Reference: About EPM Automate - Oracle Help Center1

質問 # 31
Which two statements are true about hierarchy sets?

• A. Hierarchy sets are always a component of a viewpoint's data chain.
• B. Hierarchy sets store the parent-child relationships between nodes of node types defined for a dimension.
• C. You can manage multiple hierarchies in a single hierarchy set.
• D. Shared nodes exist when the same node type is used in multiple hierarchy sets.

正解：B、C

解説：
Comprehensive Explanation: According to the reference, "Hierarchy sets store the parent-child relationships between nodes of node types defined for a dimension. You can manage multiple hierarchies in a single hierarchy set." The other statements are false. Hierarchy sets are not always a component of a viewpoint's data chain, but only when they are selected as a data object for the viewpoint. Shared nodes exist when the same node is used in multiple hierarchy sets, not when the same node type is used.

質問 # 32
You have account dimensions in two different applications that must be kept in sync.
Given a business requirement that nodes added to either application must be shared with the other, what should you do?

• A. Create one bi-directional node type converter between the two applications.
• B. Create three node type converters: one with Application! accounts as the source and Application2 accounts as the target, another with Application2 accounts as the source and Application! accounts as the target, and a third for bi-directional sharing.
• C. Create one node type converter with Application! accounts as the source and Application2 accounts as the target, and specify a reverse conversion in requests when sharing in the opposite direction.
• D. Create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target.

正解：C、D

解説：
Explanation
To share nodes between applications, you need to create node type converters and maintenance views. Node type converters enable you to transform properties or derive values from source node types to target node types when sharing data across applications. You need to create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target. This way, you can share nodes in both directions. Maintenance views contain viewpoints from multiple applications that facilitate sharing data across applications. You need to create a maintenance view with viewpoints for both the General Ledger account dimension and the Planning account dimension. This way, you can create requests or subscriptions to share nodes between the two dimensions. You do not need to create one bi-directional node type converter or a node type converter for the Account node type in the General Ledger application that uses the Planning Account node type as a source. References: Working with Node Type Converters - Oracle Help Center1; Working with Maintenance Views - Oracle Help Center2

質問 # 33
At the end of the registration process, each dimension generates a data chain, which is a group of data objects within the information model.
Which statement is FALSE regarding the data chain object?

• A. Node types manage nodes and properties.
• B. Node sets define the group of nodes available in viewpoints.
• C. You can define your own hierarchy sets when you want to create alternate hierarchies using different relationships between the same or different node types.
• D. Views are a collection of node sets and hierarchy sets.
• E. A viewpoint is the interface you use to display and edit information, and work with data.
• F. A hierarchy uses all the data chain objects.

正解：F

解説：
This option is false because a hierarchy does not use all the data chain objects, but only a node type and a hierarchy set. A node type defines the nodes and properties that are used in the hierarchy, and a hierarchy set defines the relationships between the nodes.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/understanding-data-chains.html

質問 # 34
You have a source viewpoint with an entity hierarchy with top nodes defined for Departments and Geography.
Your target viewpoint only has departments.
If you define a subscription that is filtered by the Department top node, what happens when changes are made to the Geography hierarchy in the source viewpoint?

• A. The system does not create a subscription request.
• B. The system creates an empty subscription request for tracking purpose, but does not notify the request assignees.
• C. The system creates a subscription request and flags request items for the Geography hierarchy for deletion.
• D. The system notifies the request assignee that changes were made to the Geography hierarchy, but generates no request items.

正解：A

解説：
Explanation
When a data manager submits a request in a view that has subscriptions defined, the system only generates subscription requests for the viewpoints that match the filter criteria of the subscriptions. If changes are made to a viewpoint that does not match the filter criteria, the system does not create a subscription request for that viewpoint. References: Creating, Editing, and Validating Subscriptions - Oracle Help Center1

質問 # 35
Which are two reasons for creating a migration snapshot?

• A. To migrate the enterprise data between different releases of the environment
• B. To export the enterprise data to an external application
• C. To restore the artifacts and data to the snapshot state
• D. To refresh the test environment from the production environment
• E. To download the enterprise data locally for offline work

正解：C、D

解説：
According to the Oracle Help Center, migration snapshots are used to migrate application artifacts and data between environments, such as refreshing the test environment from the production environment. Migration snapshots can also be used to restore the artifacts and data to the snapshot state in case of any issues or errors. The other reasons are not valid for creating a migration snapshot.

質問 # 36
Which two statements are true about exporting dimensions and mappings7

• A. For Planning and Universal applications, you can export enterprise data using either a connection or a comma-delimited file.
• B. All application types support exporting dimensions and mappings to registered external applications using connections.
• C. For bound hierarchy viewpoints, nodes are exported starting with the top nodes.
• D. You need the Data Manager or Owner permission to the application to export its dimensions and mappings.

正解：A、D

解説：
1. You need the Data Manager or Owner permission to the application to export its dimensions and mappings: This option is correct because the Data Manager or Owner permission is required to export enterprise data from an application to an external application or a file.
2. For Planning and Universal applications, you can export enterprise data using either a connection or a comma-delimited file: This option is correct because Planning and Universal applications support both methods of exporting enterprise data.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/exporting-enterprise-data.html

質問 # 37
Maintenance views contain viewpoints from multiple applications. What two types of sharing do these views facilitate?

• A. Aligning nodes and property values between comparable dimensions in different applications
• B. Adding new nodes to comparable dimensions across multiple applications
• C. Copying hierarchies from one application to another
• D. Sharing workflows and approvals for comparable dimensions across applications

正解：A、B

解説：
Maintenance views are views that contain viewpoints from multiple applications that facilitate sharing data across applications. Maintenance views enable you to add new nodes to comparable dimensions across multiple applications by creating requests or subscriptions that include viewpoints from different applications. Maintenance views also enable you to align nodes and property values between comparable dimensions in different applications by using compare functions or property derivations. Maintenance views do not facilitate sharing workflows and approvals for comparable dimensions across applications, because workflows and approvals are defined at the application level and are not shared across applications. Maintenance views do not facilitate copying hierarchies from one application to another, because hierarchies are defined by hierarchy sets and are not shared across applications. Reference: Working with Maintenance Views - Oracle Help Center2

質問 # 38
Which two statements are true about Inherited properties7

• A. Values are inherited from the top node.
• B. Different values can be inherited for shared nodes under multiple parents.
• C. Inheritance can be overridden at lower levels; descendants from the overriding position inherit the override value.
• D. Nodes in lists can inherit property values from their ancestors.

正解：B、C

解説：
"Inheritance can be overridden at lower levels; descendants from the overriding position inherit the override value." and "Different values can be inherited for shared nodes under multiple parents." The other statements are false. Nodes in lists cannot inherit property values from their ancestors, because lists do not have parent-child relationships. Values are not inherited from the top node, but from the nearest ancestor with a value.

質問 # 39
Consider a hierarchy: A parent node, "Core Products", has a child node "100", which has children "101" and
"102". In the same hierarchy, you insert "100" under another parent, "New Products".
What happens?

• A. Node "100" is inserted as a unique node under "New Products", with a qualifier to indicate that it's a separate node from the original.
• B. Node "100" cannot be inserted under another parent in the same hierarchy.
• C. Node "100" and its children are inserted as shared nodes under "New Products".
• D. Only node "100" is inserted as a shared node under "New Products".

正解：C

質問 # 40
Which three statements are true about lookup sets7

• A. You can use lookup sets to group and filter nodes.
• B. Lookup sets associate source values, or keys, with target values.
• C. Lookup sets are created during application registration.
• D. Keys and values in a lookup set can be configured for one or more applications.
• E. You use lookup sets in expressions for deriving properties or transforming properties in node type converters.

正解：B、D、E

解説：
Explanation
Lookup sets are used to associate source values, or keys, with target values that can be used in expressions for deriving properties or transforming properties in node type converters. You can configure keys and values in a lookup set for one or more applications. Lookup sets are not created during application registration, but rather as separate objects that can be shared acrossapplications. Lookup sets are not used to group and filter nodes, but rather to map values between different applications or perspectives. References: Working with Lookup Sets - Oracle Help Center2

質問 # 41
The Owner permission for an application lets users perform which three tasks?

• A. Modify application registration.
• B. Delete service administrators from an instance.
• C. Import viewpoints from external applications.
• D. Manage an application's data objects.
• E. Assign permissions for an application's data objects to other users and groups.

正解：A、D、E

解説：
The Owner permission is the highest level of permission that can be assigned to an application. Users with the Owner permission can perform various tasks such as: modify application registration, assign permissions for an application's data objects to other users and groups, manage an application's data objects such as properties, views, node types, node sets, hierarchy sets, etc., create and delete applications, and link dimensions across applications. Users with the Owner permission cannot import viewpoints from external applications, because viewpoints are created within Oracle Enterprise Data Management Cloud and are not imported from external applications. Users with the Owner permission cannot delete service administrators from an instance, because service administrators are created and managed in Oracle Cloud EPM through My Services by the Identity Domain Administrator. Reference: Working with Permissions - Oracle Help Center1; Registering Applications - Oracle Help Center2

質問 # 42
......

Oracle 1z0-1086-22試験に備えるためには、候補者はOracle EPM CloudおよびOracle ERP Cloudソリューションについての確固たる理解を持っている必要があります。また、データ管理および統合ツールを使用した経験が必要です。さらに、候補者はデータガバナンスおよびマスターデータ管理の原則に精通している必要があります。この試験の勉強には、オンラインのトレーニングコース、勉強ガイド、練習問題など、さまざまなリソースを活用することができます。

 

合格させるOracle 1z0-1086-22試験問題でテスト復刻エンジンとPDF：https://www.passtest.jp/Oracle/1z0-1086-22-shiken.html

実際問題を使って1z0-1086-22問題集無料サンプル問題と練習テストエンジン：https://drive.google.com/open?id=16XYxUznNsQpGvCldh_8DvNtFrnbeNB15