試験高合格率保証2025年05月02日 1z0-1042-24試験問題と正確な回答！
テストエンジン練習問題1z0-1042-24有効最新の問題集
Oracle 1z0-1042-24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 22
To use Integration Insight to map milestones to actions in an Oracle Integration Cloud (OIC) business process implementation, certain prerequisites and conditions must be met.
Which is NOT a valid consideration for models and mapping milestones?
- A. Extraction criteria for the milestone indicator is defined with an XPath expression.
- B. A business process implementation can be mapped to milestones within only one model.
- C. The model must be in Draft state in order to map a milestone to an integration action.
- D. Milestones in a single model can be mapped to multiple business processes.
- E. Extraction criteria for the instance unique identifier is defined with an XPath extension.
正解：B
解説：
A business process implementation can be mapped to milestones across multiple models, makingBthe incorrect statement. Milestones can be used in complex scenarios, shared between processes, and can be identified with XPath expressions.
質問 # 23
In Oracle Integration Cloud (OIC), you are working on an integration that uses a REST trigger, which will require authentication. You need to ensure that only authorized clients can access the integration.
Which configuration should you apply?
- A. Configure the REST Adapter with a Basic Authentication or OAuth 2.0 security policy and provide the required credentials.
- B. Encrypt the payload using a custom encryption algorithm and provide the decryption key to authorized clients.
- C. Enable Cross-Origin Resource Sharing (CORS) and set an API key in the REST Adapter configuration.
- D. Set up an IP whitelist in the OIC instance, allowing only specific IP addresses to access the integration.
正解：A
解説：
Configuring Basic Authentication or OAuth 2.0 is the most appropriate and secure method to authenticate clients accessing your OIC integration via a REST trigger.
質問 # 24
OIC is available in two editions - Standard and Enterprise. Which OIC Enterprise Edition capabilities are ALSO available in the OIC Standard edition? (Select two)
- A. Integration Insight
- B. B2B Trading Partner Agreements
- C. File Server
- D. Visual Builder
- E. Enterprise application Adapters (such as EBS, JDE, SAP, and Siebel)
- F. Process Applications
正解：C、D
解説：
Both the File Server and Visual Builder capabilities are available in the OIC Standard edition, along with the Enterprise edition. Other capabilities, such as B2B and Process Applications, are exclusive to the Enterprise edition.
質問 # 25
As an Oracle Integration Cloud (OIC) specialist, you are tasked with implementing a scheduled integration between two enterprise applications. The client requires that the integration be run every weekday at 3:00 PM to synchronize data between the systems.
Which advanced scheduling configuration expression will you use?
- A. "FREQ=DAILY;BYDAY!=SA,SU;BYHOUR=15"
- B. "FREQ=WEEKLY;BYDAY=MO,TU,WE,TH,FR;BYHOUR=15"
- C. "FREQ=DAILY;BYDAY=MO-FR;BYHOUR=15"
- D. "FREQ=WEEKLY;BYDAY=MO-FR;BYHOUR=15"
正解：C
解説：
This expression specifies a daily frequency with a restriction to weekdays (Monday through Friday) at 3:00 PM, which matches the requirement.
質問 # 26
Which statement is NOT true about Schedule Parameters in Oracle Integration Cloud (OIC) integration flows?
- A. Updates to Schedule Parameter values can be made manually when starting a schedule.
- B. Schedule Parameters are always visible as an additional data source in the Sources section of the mappers and expression editors within the integration.
- C. Updates to Schedule Parameter values can be made manually before submitting an ad hoc request.
- D. Updates to Schedule Parameter values made dynamically in an Assign action will not persist on to the next instance run of the integration.
正解：B
解説：
Schedule parameters are not directly visible as data sources in the mapper or expression editors. They are used for dynamic configuration during execution.
質問 # 27
What are the four steps required to complete the task 'create a connection'?
- A. Test Connection
- B. Import SSL Certificate
- C. Configure Lookup
- D. Configure Connection Security
- E. Select an Adapter
- F. Configure Connection Properties
正解：A、D、E、F
解説：
The four steps to creating a connection are selecting an adapter, configuring connection properties, configuring security, and testing the connection. Importing SSL certificates and configuring lookups are optional tasks.
質問 # 28
Which two statements about lookups are correct?
- A. Lookups are deployed as part of integration activation.
- B. Changes made to lookups already used in active integrations take effect immediately.
- C. You cannot clone a copy of an existing lookup.
- D. Create a lookup to map values between applications.
正解：B、D
解説：
* A: Lookups are used to map values between different applications and systems.
* C: Changes made to lookups in OIC are applied in real time, affecting active integrations immediately.
* Bis incorrect as lookups are independent entities and not tied to integration activation.
* Dis incorrect because you can clone existing lookups.
質問 # 29
You need to create an OIC integration that will process many records individually contained within a large file. You have been advised to use an implementation approach that includes using the Download File operation of an FTP adapter in conjunction with the Stage File action's Read File in Segments operation to mitigate issues with memory consumption.
When using this approach, which is a valid consideration regarding the use of the Read File in Segments operation?
- A. You must provide the actual filename because file references cannot be processed by the Read File in Segments operation.
- B. Segment sizes will default to 50 records but can be configured to any other segment size.
- C. You will need to explicitly configure a Scope action for this operation if you want to add additional actions during the processing of each segment.
- D. The Read File in Segments operation allows you to process the segments sequentially or in parallel.
正解：D
解説：
The Read File in Segments operation allows you to process file segments sequentially or in parallel, making it an effective method to handle large files without consuming excessive memory.
質問 # 30
What two tasks can a user with the Application Developer role perform?
- A. Create an Application.
- B. Subscribe to a Plan.
- C. Deploy to a Gateway.
- D. Create an API.
正解：A、D
解説：
Application developers can create APIs and applications within Oracle Integration Cloud (OIC). They have the capability to define API logic and group resources. Subscribing to plans or deploying to gateways is generally reserved for administrators.
質問 # 31
Which Oracle Integration Cloud (OIC) service role does NOT have permission to run an OIC integration flow?
- A. ServiceDeveloper
- B. ServiceAdministrator
- C. ServiceUser
- D. ServiceInvoker
正解：D
解説：
The ServiceInvoker role is primarily designed for invoking integrations programmatically via REST/SOAP APIs and cannot manually run integrations from the OIC console.
質問 # 32
Which three statements are true about SOAP and the advantages it provides?
- A. It leverages XML-based payloads to communicate between two client machines across any modern network.
- B. It is platform and programming language independent.
- C. It provides flexibility for message format, allowing for loose coupling between client and server.
- D. As compared to RPC (Remote Procedure Calls), which are sometimes blocked by firewalls and proxy servers, SOAP over HTTP can overcome that limitation.
- E. SOAP clients can easily hold stateful references to remote server-side SOAP objects.
- F. It commonly serves as a cleaning agent to remove excess data from the transmission protocol.
正解：A、B、D
解説：
SOAP over HTTP helps bypass firewalls and proxies, uses XML-based messaging for platform independence, and is designed for interoperability between systems. SOAP does not clean excess data (C) and is typically stateless (F).
質問 # 33
You receive a status code: 502 Proxy Error.
Which is a possible event cause for this error?
- A. When the proxy setup is incorrect.
- B. While adding proxy for an enterprise application device.
- C. While the proxy server is not responding to the request.
- D. While registering a large number of devices using the Batch Registration feature under the Devices menu.
正解：D
解説：
A 502 Proxy Error can occur when the proxy server is overloaded or unresponsive due to a large number of concurrent requests, such as during the Batch Registration feature in the Oracle IoT Cloud. Incorrect proxy setup and server unresponsiveness can also cause the error.
質問 # 34
You are tasked with provisioning a Managed File Transfer (MFT) Cloud Service on Oracle Cloud Infrastructure (OCI).
Which statement is valid concerning MFT provisioning?
- A. Because MFT requires an Oracle ATP database, the database instance must be provisioned in OIC.
- B. You must include the B2B cluster configuration since the MFT service runs with B2B document.
- C. Defining virtual machines (compute nodes) for the WebLogic cluster is no longer needed.
- D. MFT requires creating an Oracle SOA Cloud Service instance and choosing "MFT cluster" as the service type.
正解：D
解説：
MFT requires creating an Oracle SOA Cloud Service instance and choosing "MFT Cluster" as the service type. Oracle MFT is available as part of the SOA Cloud Service. During provisioning, selecting "MFT Cluster" ensures that the appropriate infrastructure is set up for the MFT functionalities.
* Defining virtual machines: OCI manages the infrastructure for the SOA service, so you typically wouldn't directly manage virtual machines.
* B2B cluster: B2B configurations might be used, but it's not mandatory during initial provisioning.
* ATP database: MFT does not require a separate Oracle ATP database, as it utilizes an internal database managed by OCI as part of the SOA service.
質問 # 35
You can group one or more Oracle Integration Cloud (OIC) integrations into a single structure called a package.
Which statement is NOT true about OIC packages?
- A. Packages enable you to easily import and export a group of integrations to and from OIC.
- B. You can import packages directly from the Oracle Marketplace.
- C. Packages cannot be locked to deny other users access to your integrations.
- D. New packages can be created by clicking the Create button on the Packages page in the console.
- E. Integrations do not need to be part of a package.
- F. All packages must include at least one integration.
正解：C
解説：
Packages in OIC cannot be locked to prevent other users from accessing the integrations. The other statements are true, including the ability to create, import, and manage integrations within packages.
質問 # 36
The Oracle Integration Cloud (OIC) integration design editor provides a data mapper UI tool that is available for Map actions.
Which statements are TRUE regarding the use of the Mapper tool? (Choose two.)
- A. You cannot drag and drop a source data element to a target node element that is already mapped.
- B. You cannot drag and drop an XPath function activity directly to a target node element.
- C. You cannot drag and drop an XSLT flow control statement directly to a target node element.
- D. You can drag and drop a source data element to multiple target node elements.
正解：C、D
解説：
The Mapper tool allows flexibility in mapping, including mapping one source element to multiple target elements. XSLT flow control statements (e.g., xsl
, xsl
) cannot be directly dragged to target elements.
質問 # 37
Which JNDI name value must be provided when configuring the properties of a new database adapter outbound connection pool to support dependent SOA composite applications?
- A. The corresponding XA datasource configuration deployed to the same WebLogic cluster.
- B. The corresponding XA enterprise resource adapter application deployed to the same WebLogic cluster.
- C. The associated XA database adapter plan deployed with this database adapter outbound connection pool.
- D. The defined XA database adapter connection factory configured for this WebLogic domain.
正解：A
解説：
The correct JNDI name value for the database adapter outbound connection pool is the JNDI name of the corresponding XA datasource configuration deployed to the WebLogic cluster. This ensures that the SOA composite application can access the required database resources.
質問 # 38
When a connection is in edit mode and the browser crashes, the connection becomes locked, which then prevents it from being edited.
Which two users can unlock the connection?
- A. A user with the Designer Role
- B. The same user who has edited the connection
- C. Any user
- D. A user with the Administrator Role
正解：B、D
解説：
The connection can be unlocked by the same user who was editing it or by an administrator with broader privileges. Designers or any other user typically lack the permission to unlock a connection.
質問 # 39
Which two statements are true regarding messaging adapters in Oracle Integration Cloud?
- A. It is not mandatory to install a Connectivity agent to use the OCI Streaming Adapter for inbound polling.
- B. Both the Apache Kafka and OCI Streaming adapter support XML, JSON, and Avro message formats.
- C. The OCI Streaming Adapter does not support consuming messages from a specified consumer group.
- D. The Apache Kafka adapter can be configured to support Transactions in case of Producer.
正解：B、D
解説：
Both Apache Kafka and OCI Streaming adapters support various message formats like XML, JSON, and Avro. The Apache Kafka adapter also supports transactional messaging for producers.
質問 # 40
The Integrations flow element in Oracle Integration Cloud (OIC) processes provides you an option to easily integrate your process application with other applications and services.
Which three types can be added and managed from the Integrations flow element?
- A. OIC invokable dynamic processes hosted within the same OIC environment
- B. Web Service Connectors
- C. REST Connectors
- D. OIC integrations hosted within the same OIC environment
- E. OCI Functions deployed in the same OCI compartment hosting the OIC environment
正解：B、C、D
解説：
The three types that can be added and managed in OIC integrations are OIC integrations hosted within the environment, Web Service Connectors, and REST Connectors. OCI Functions are not directly managed from the integrations flow element.
質問 # 41
Which of the following Service-Oriented Architecture Cloud Service (SOA CS) Components is NOT used to directly route a message to an endpoint?
- A. Oracle Mediator
- B. Oracle Business Rules
- C. Oracle Service Bus
- D. Oracle BPEL Process Manager
正解：B
解説：
Oracle Business Rules is used to define and execute business rules, but it does not handle message routing directly, unlike Mediator, BPEL Process Manager, and Service Bus.
質問 # 42
......
試験解答1z0-1042-24最新版とテストエンジン：https://www.passtest.jp/Oracle/1z0-1042-24-shiken.html
合格させる1z0-1042-24試験最新の1z0-1042-24試験問題集PDF：https://drive.google.com/open?id=1_CBA2JX5QyvQHbVnQ8a8sS4HX42rFRCk