2022年最新の実際のPassTest C-IBP-2202問題集PDFで100%合格率を保証します
無料SAP C-IBP-2202試験問題と解答
質問 36
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them?
Note: There are 2 correct Answers to this question.
- A. SAP IBP for demand
- B. SAP IBP for response and supply
- C. SAP IBP for sales and operations
- D. DDMRP
正解: B,C
質問 37
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process?
Note: There are 2 correct Answers to this question.
- A. You can export from a planning area that is on a different release.
- B. You can choose to import only some of the items that were exported.
- C. You can move a transported item from one collection to another.
- D. You can create a collection of items and export it.
正解: A,C
質問 38
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer?
Note: There are 2 correct Answers to this question.
- A. Promotion duration
- B. Loc-Prod Subst Valid-From Date
- C. Flag 'Disable Substitution of Location Products
- D. Location Product Sub Cost Rate
正解: A,B
質問 39
You need to create time periods for the time profile in a planning area. What should you be aware of when executing the Create Time Periods application job?
- A. The planning area with this time profile must be activated so that the application job can proceed.
- B. This application job cannot be scheduled for immediate start.
- C. This application job can be run for multiple time profiles at once.
- D. A time profile has to be activated so that the application job can proceed.
正解: A
質問 40
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Set the Capacity Supply Time Series indicator attribute as a key.
- B. Set the Capacity Supply additional attribute in the time profile.
- C. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
- D. Maintain the CAPASUPPLY key figure values in the planning area.
正解: C
質問 41
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. By restricting data input in the Key Figure Configuration app
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. IBP -> Data Validation in IBP Formatting Sheet tab
- D. Select Protect Active Worksheet in the About section of SAP IBP tab
正解: A
質問 42
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check.
Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Add a new time profile level to the time profile.
- B. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
- C. Change the past and future horizon of the levels in the time profile.
- D. Change the description of the attributes in the time profile.
正解: C,D
質問 43
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type DECIMAL
- B. Type NAVCHAR
- C. Type TIMESTAMP
- D. Type INTEGER
正解: A
質問 44
NO.21 For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct Answers to this question.
- A. Purge Key Figure Data
- B. Purge Master Data
- C. Purge Non-Conforming Data
- D. Create Time Periods for Time Profiles
正解: A,B
質問 45
NO.53 Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.
- A. Rounding can be executed for the sales history.
- B. Correlations can be evaluated.
- C. Missing Values can be substituted.
- D. Promotion Sales Lift Ups can be deleted.
正解: C,D
質問 46
Which of the following settings can you use in your supply planning background job triggered from Excel?
Note: There are 2 correct Answers to this question.
- A. Target currency
- B. Type of algorithm to use
- C. Planning unit
- D. UOM to ID
正解: B,D
質問 47
You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks?
- A. Normalize Quotas parameter
- B. Supply propagation
- C. Compute Expected Supply parameter
- D. Balance Receipts parameter
正解: C
質問 48
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the required planning level master data exists for a subset of input key figures.
- B. It checks whether the sourcing in the Production Source Item Master Data type exists.
- C. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- D. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
正解: A,D,E
質問 49
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Link two analytics charts.
- B. Add process templates.
- C. Display all assigned analytics on a single UI.
- D. Rename the charts.
- E. Organize charts.
正解: B,C,E
質問 50
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.
- A. Target key figures for these snapshots must have lag as a root attribute.
- B. Target key figures for these snapshots are exposed to the user in planning views.
- C. Lag-based snapshots are automatically assigned to a snapshot operator.
- D. Lag-based snapshots are created in the Configuration app for a fixed time range.
正解: A,C
質問 51
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Setting disaggregation logic for the key figure
- B. Enabling planning notes for the key figure
- C. Setting permitted planning levels
- D. Enabling fixing for the key figure
- E. Hiding or displaying totals for the key figure
正解: A,B,D
質問 52
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.
- A. Ability to use task and case management
- B. Ability to create smart alerts
- C. Ability to create a feasible plan
- D. Ability to balance demand and supply and attain financial targets
正解: A,B
質問 53
Which features apply to quota violations modeled with the optimizer?
- A. Quota violation cost is maintained as an attribute as a key figure.
- B. Quotas can be modeled for sourcing location, production, and consensus demand.
- C. Quotas require sourcing ratios to be maintained.
- D. Min and Max Quotas have to be the same as sourcing ratios.
正解: C
質問 54
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Lot sizes
- C. Target inventory level
- D. Reorder point
正解: B,D
質問 55
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for a certain quantity of a key figure value.
- B. Fixing is possible for manually editable key figures.
- C. Fixing is possible for system editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
正解: B,D
質問 56
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute transformations
- B. When modeling attribute as a key figure
- C. When using IFISNULL statements in the formula
- D. When modeling cross-period calculations
正解: A,D
質問 57
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using attribute as a key figure
- B. Using aggregation mode average
- C. Using key figure calculation
- D. Using local member
正解: B
質問 58
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note: There are 3 correct Answers to this question.
- A. You can add (or delete) planning objects to a planning view after these filters are applied.
- B. You can only apply one value-based filter per planning view.
- C. These filters can be used together with attribute totals in the same planning view.
- D. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- E. These filters are always applied based on the values stored in the database.
正解: B,D,E
質問 59
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP. What is mandatory to create in your planning area for the setup of reference product(s) to work?
Note: There are 2 correct Answers to this question.
- A. Definition of an attribute representing the product description
- B. Planning objects for the new product
- C. Definition of an attribute representing the product ID
- D. Definition of Actual Sales business meaning for one key figure
正解: B,C
質問 60
What type of key figure requires a planning level to have all attributes as roots?
- A. The attribute transformation key figure, such as PERIODID1
- B. The time independent key figure, such as FCSTMAPE
- C. The special key figure marked as an aggregate key figure
- D. The conversion key figure, such as exchange rate
正解: C
質問 61
......
SAP C-IBP-2202 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
検証済みC-IBP-2202問題集と解答で最新C-IBP-2202をダウンロード：https://www.passtest.jp/SAP/C-IBP-2202-shiken.html