2022年最新の156-816.61プレミアム資料テストPDFの無料問題集お試しセット
試験合格を向けて156-816.61今すぐ弊社のCCMSE試験パッケージを使おう
質問 30
Which of the following is the only interface configured by running sysconfig, during the installation of a VSX Gateway in a single Gateway environment?
- A. Synchronization interface
- B. Dedicated Customer interface
- C. External Interface
- D. Management Interface
- E. Internal Virtual Route Interface
正解: D
質問 31
When deploying a VSX Gateway managed by SmartCenter Server, how many Certificate Authorities will the deployment have?
- A. Three; one for the SmartCenter Server, one shared by all Virtual Systems and one shared by the Virtual Routers
- B. One for each Virtual System configured on the VSX Gateway
- C. One, shared by all components
- D. One for each Virtual System and Virtual Router and Configured on the VSX Gateway
- E. Two; one for the SmartCenter Server and one shared by all Virtual Systems and Virtual Routers
正解: C
質問 32
A Warp Link is a virtual point-to-point connection between a:
- A. Virtual System and the management interface
- B. Virtual Router and Virtual Switch
- C. Virtual Router and a physical interface
- D. Virtual System and another Virtual System
- E. Virtual Router and Virtual System
正解: E
質問 33
If a VSX Gateway is protecting multiple customer networks behind only one shared interface, the VSX Administrator must either configure _____________ for source-based routing or deploy a VLAN solution.
- A. VSX Gateway High Availability
- B. Multiple External Virtual Routers
- C. An Internal Virtual Router
- D. VSX Gateway Load Sharing
- E. Non-VLAN Interface Trunking
正解: C
質問 34
Which of the following interface are configured by running sysconfig, during installation of a VSX Gateway in a High Availability environment?
- A. Any Configured VLAN
- B. Synchronization interface
- C. Dedicated Customer interface
- D. External Interface
- E. Management Interface
正解: E
質問 35
You need to provide a security layer for an existing core network. You need an inspection module that operates at layer 2, is completely transparent and does not impact the existing IP structure or different control protocols in use. Which of the following virtual devise will perform the kind of inspection you need?
- A. External Virtual Router
- B. Virtual System in Bridge Mode
- C. Internal Virtual Router
- D. Virtual System
- E. Virtual Switch
正解: B
質問 36
What is the netmask for each configured Warp Link?
- A. 255.255.255.0
- B. Same as the netmask of the default route of the External Virtual Router
- C. 255.255.0.0
- D. 255.255.255.255
- E. 0.0.0.0
正解: D
質問 37
When installing the Security Policy of a Management Virtual System (MVS), what objects are available for Policy installation, other than the MVS?
- A. All configured Virtual Systems and the External Virtual Router
- B. All configured Virtual Systems
- C. All configured Virtual Switches
- D. No other object is available for Policy installation
- E. All configured Virtual Routers
正解: E
質問 38
Which of the following statements is true concerning the default Security Policy of the External Virtual Router?
- A. The External Virtual Router automatically performs Hide NAT behind external interface for all Virtual Systems connected to it
- B. The default policy of the External Virtual Router can't be changed
- C. All traffic coming from networks protected by a VSX Gateway is accepted. All other traffic is dropped
- D. The External Virtual Router always enforces the same policy as the Management Virtual System
- E. The default policy of the External Virtual Router Denies all traffic going to or coming from it
正解: E
質問 39
Which of the following VLAN membership types is considered explicit in its propogation?
- A. Application-based
- B. Protocol-based
- C. MAC address-based
- D. Session-based
正解: B
質問 40
TRUE or FALSE. A Virtual System in Bridge Mode can enforce anti-spoofing definitions.
- A. True, as long as Network Address Translation is performed
- B. True, as long as the Virtual System has more than two interfaces defined
- C. True, anti-spoofing must be manually defined in bridge mode
- D. False, anti-spoofing can't be configured for Virtual systems in Bridge Mode
- E. True, anti-spoofing measures are defined automatically is Bridge mode
正解: C
質問 41
When Virtual systems are deployed in Bridge mode, they use _________ to detect failures and forward traffic to another Virtual System in a cluster?
- A. MPLS
- B. STP
- C. PBDU
- D. OSPF
- E. VRRP
正解: B
質問 42
What is the required to prevent loops in Virtual Systems in a Cluster XL environment?
- A. MPLS
- B. STP
- C. OSPF
- D. VRRP
- E. BPDU
正解: B
質問 43
A __________________ is a virtual security device configured on a VSX Gateway, which operates as a complete routing and security domain, with firewall and VPN capabilities.
- A. External Virtual Router
- B. Context identification Module
- C. Virtual Switch
- D. Virtual System
- E. Virtual System Extension
正解: D
質問 44
Which of the following VSX Gateway configuration is valid?
- A. Multiple NICs assigned the same IP addresses, for each Virtual System in the configuration but with different VLAN tags
- B. A shared NIC assigned to different Virtual Systems, with different IP addresses on the same VLAN
- C. Multiple NICs assigned to different Virtual Systems in Bridge Mode, performing Hide NAT
- D. A shared NIC assigned to different Virtual Systems, with the same IP address on different VLANs
- E. A shared NIC assigned to different Virtual Systems, with the same IP addresses on the same VLAN
正解: D
質問 45
Which of the following commands should you run to stop a VSX Gateway Cluster?
- A. vsxhastop
- B. cpstop
- C. vsx cpstop
- D. vsxstop
- E. cphastop
正解: B
質問 46
Bridged Virtual Systems in a cluster monitor which of the following protocols, to fail over a bridged system?
- A. BPDU
- B. MPLS
- C. VTP
- D. OSPF
- E. STP
正解: A
質問 47
Consider the following scenario: A hub connects four hosts a VLAN-Tagged port on a switch. The hosts have IP addresses ranging from 10.0.0.1 to 10.0.0.4. The switch adds a VLAN Tag of 400 to all communication passing through it. Once communication from the second host on the hub passes through the switch port on the way to its destination on the external network, how does the traffic appear in SmartView Tracker? Assume that traffic enters the Gateway on interface eth3.
- A. eth3.2
- B. eth3.400
- C. eth3.400.2
- D. eth3.402
- E. eth3.2.400
正解: B
質問 48
Communication within a VLAN takes place at which layer of the OSI Model IP stack?
- A. Network Layer
- B. Physical Layer
- C. Data-link Layer
- D. Session Layer
- E. Transport Layer
正解: C
質問 49
Which of the following is a Multi-Context process?
- A. gwd
- B. vsxd
- C. psd
- D. synd
- E. cpd
正解: E
質問 50
......
2022年最新の問題をマスターCCMSE合格目指して156-816.61リアル試験！：https://www.passtest.jp/CheckPoint/156-816.61-shiken.html