[2022年01月]更新のNetwork Appliance NS0-183試験一発合格保証！
完全版NS0-183練習テスト61独特な解答と解釈が待ってます！今すぐ取得せよ！
質問 21
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair.
The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Install 10 meter NetApp supported copper cables.
- B. Change the requirement for Ethernet cables.
- C. Change the requirement for optical cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
正解: A,B
質問 22
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. NetAppDocs
- B. SnapGathers
- C. Inventory Collect Tool
- D. Active IQ OneCollect
正解: A
解説:
Explanation/Reference: http://197.253.9.244/ontap%209-5/Cluster%20Admin/2_Student%20Guide/STRSW-ILT- ONTAPADM_StudentGuide.pdf
質問 23
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 2
- B. Option 4
- C. Option 3
- D. Option 1
正解: A
質問 24
When completing a new ONTAP 9.5 cluster base installation, which three SVM types will be present on the system by default? (Choose three.)
- A. cluster SVM
- B. node SVM
- C. system SVM
- D. admin SVM
- E. data SVM
正解: B,C,D
質問 25
A customer wants to reduce the task allocation requirement for the root aggregate and increase usable storage by partitioning the disks into one large part and one small part. The small part is used for the root aggregate and the large part for the data aggregates?
In this situation, what is this feature called?
- A. RAID
- B. storage virtual machine
- C. Advanced Drive Partitioning
- D. ONTAP
正解: C
質問 26
You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.
Referring to the exhibit, which steps are required to get an HA cabled system?
- A. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
- B. 1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
- C. 1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.
- D. 1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
正解: D
質問 27
You must cable a new AFF A700 with two DS224C shelves that are fully populated with 15.3 TB SSDs. You want to ensure that the maximum bandwidth between the disks and the controllers is reached.
In this scenario, according to NetApp best practices, which type of cabling should you use?
- A. single-path HA
- B. direct connected HA
- C. quad-path HA
- D. multipath HA
正解: C
質問 28
Which type of partitioning would you use when installing a FAS8200 with 24 SAS drives running ONTAP 9.5?
- A. root-root-data partitioning
- B. root-data partitioning
- C. root-data-data partitioning
- D. root-root-data-data partitioning
正解: B
質問 29
Which statement about LIFs is true?
- A. Cluster LIFs and data LIFs can share a port.
- B. One cluster-management LIF exists per node.
- C. One port can host multiple data LIFs.
- D. A data LIF can be associated with multiple SVMs.
正解: C
質問 30
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. node SVM
- B. system SVM
- C. admin SVM
- D. data SVM
正解: B,C
質問 31
When you install a new ONTAP 9.7 4-node cluster, which network type is required?
- A. peering network
- B. intercluster network
- C. data network
- D. cluster interconnect
正解: D
質問 32
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID4
- B. RAID_DP
- C. RAID1
- D. RAID_TEC
正解: D
質問 33
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 4
- B. Option 2
- C. Option 3
- D. Option 1
正解: D
解説:
https://library.netapp.com/ecm/ecm_download_file/ECMM1280394
質問 34
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The assigned port for the intercluster e1c LIF is in the down admin state.
- B. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
- C. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
- D. The LIF that was created has the wrong role type.
正解: D
質問 35
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. cluster switch cabling
- B. node CPU utilization
- C. data switch cabling
- D. shelf connectivity
正解: B,D
解説:
Explanation/Reference: https://www.doc-developpement-durable.org/file/Projets-informatiques/cours-&-manuels- informatiques/Netapp/Data%20ONTAP%208.0%207-Mode%20System%20Administration%20Guide.pdf
質問 36
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 37
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. data SVM
- B. multitenancy node SVM
- C. admin SVM
- D. system SVM
正解: A
質問 38
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. cluster switch cabling
- B. node CPU utilization
- C. data switch cabling
- D. shelf connectivity
正解: A,D
質問 39
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
- A. route
- B. NTP
- C. DNS
- D. VLAN
正解: A,C
質問 40
......
最新NS0-183問題集試験解答はここにある：https://www.passtest.jp/NetworkAppliance/NS0-183-shiken.html