[2022年02月] 最新のJN0-663試験問題集には合格保証が付きます [Q33-Q52]

[2022年02月] 最新のJN0-663試験問題集には合格保証が付きます

信頼できるJNCIP-SP JN0-663問題集PDFで2022年02月02日に更新された問題

質問 33
Exhibit:

You must configure an OSPF virtual link to facilitate communication between Area 0 and Area 20.
Referring to the exhibit, which two addresses should you use as the neighbor IDs of the virtual link endpoints?
(Choose two.)

• A. The address that is associated with R2's xe-1/2/0 interface.
• B. The address that is associated with R4's router ID.
• C. The address that is associated with R2's router ID.
• D. The address that is associated with R4's xe-0/0/1 interface.

正解: B,C

 

質問 34
Exhibit.

You have a Layer 3 VPN established between PE-1 and PE-2 to allow communication between CE-1 and CE-2 You want to establish communication between CE-1 and CE-2.
Referring to the exhibit, which statement is correct?

• A. You will need a BGP export policy on PE-1 to redistribute the OSPF routes learned from PE-2 to the CE1 BGP neighbor
• B. You will need a VRF export policy on PE-2 to redistribute the OSPF routes learned from CE-2. through the Layer 3 VPN
• C. You will need a VRF import policy on PE-1 to receive the OSPF routes learned from PE-2. through the Layer 3 VPN
• D. You will need a VRF import policy on PE-2 to advertise the OSPF routes learned from CE-2 through the Layer 3 VPN

正解: B

 

質問 35
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

• A. This router is an ABR
• B. There are two interfaces marked as passive.
• C. This router is an ASBR.
• D. There is one interface marked as passive.

正解: B,C

 

質問 36

Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.
Winch two EVPN functions accomplish this task? (Choose two.)

• A. split horizon
• B. multicast ingress replication
• C. aliasing
• D. designated forwarder election

正解: A,D

 

質問 37
Exhibit:

Referring to the exhibit, which three statements are correct? (Choose three.)

• A. This route is an EVPN Type-1 route.
• B. The router with the IP address 10.101.100.3 is the originator of this route.
• C. This route contains the MAC address of an end host.
• D. The ESI is 00:22:22:22:22:22:22:22:22:22.
• E. This ESI Auto-Discovery route is used for designated forwarder election.

正解: A,B,D

 

質問 38
Exhibit:

Traffic is being sent from R2 to R3. The link between R2 and R3 fails.
Referring to the exhibit, which statement is correct?

• A. Manual intervention is required for traffic to be rerouted.
• B. Traffic will automatically reroute using the shortest path, which is R2 to R1 to R3.
• C. Traffic will automatically reroute distributed between all available paths.
• D. Traffic will automatically reroute using R2 to R4 to R1 to R3.

正解: D

 

質問 39

Referring to the exhibit, a Layer 3 VPN is configured, however, the routes are being hidden.
What is the problem?

• A. An active MPLS tunnel does not exist between the peers.
• B. The BGP peer is not reachable through the IGP.
• C. A route distinguisher mismatch exists between the peers.
• D. A VRF target community mismatch exists between the peers.

正解: A

 

質問 40
Exhibit:

A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2.
Which action will solve the problem?

• A. Configure topologies ipv4-unicast from protocols isis on R2.
• B. Remove topologies ipv6-unicast from protocols isis on R1.
• C. Remove topologies ipv6-unicast from protocols isis on R2.
• D. Configure an IPv4 address on interface ge-0/0/1 on R1.

正解: D

 

質問 41
Exhibit.

Two CE devices (CE-1 and CE-2) belong to the same customer and connect into a single PE device (PE-1) However, the CE devices cannot communicate with each other You want to allow the CE devices to communicate with each other Referring to the exhibit, which action would solve the problem?

• A. Configure both routing instances with the vrf-table-label statement
• B. Configure both routing instances with the set routing-options autonomous-system loops 3 statement
• C. Configure both routing instances with the as-override statement within the BGP protocol
• D. Configure both routing instances with the set routing-opt ions auto-export-statement

正解: D

 

質問 42

You are using EVPN to provide Layer 2 stretched VLANs between two sites. You notice that the MAC addresses in either site are not showing up on the remote site.
Referring to the exhibit, what are two ways to solve this problem? (Choose two.)

• A. On R2, issue the set switch-options vrf-target target:65101:22030command.
• B. On R1, issue the set switch-options vrf-target target:65101:22030command.
• C. On R1, issue the set protocols evpn vni-options vni 22030 vrf-target target
  :65101:22030command.
• D. On R2, issue the delete protocols evpn vni-options vni 22030command.

正解: A,B

解説:
Explanation

 

質問 43
Exhibit:

Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)

• A. RR1 advertises routes learned from Client1 to RR2 with itself as the next hop.
• B. RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.
• C. RR2 adds its cluster ID when advertising routes from CHent4 to Client3.
• D. RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.

正解: B,C

 

質問 44
Exhibit:

Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)

• A. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.
• B. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.
• C. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16 0/20 range.
• D. The ABR does not summarize any routes within the 192.168.16.0/20 range.
• E. The ABR advertises a default route to the NSSA using a Type 7 LSA.

正解: B,C,E

 

質問 45
Exhibit.
A customer wants to reduce LSP flooding in their IS-IS network
Which parameter should you change to accomplish this task?
A)

B)

C)

D)

• A. Option D
• B. Option A
• C. Option B
• D. Option C

正解: C

 

質問 46
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

• A. This router is an ABR
• B. There are two interfaces marked as passive.
• C. This router is an ASBR.
• D. There is one interface marked as passive.

正解: B,C

 

質問 47
Exhibit:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)

• A. set policy-options as-path LOCAL-ROUTES " (65310 I 65441)+"
• B. set policy-options policy-statement ISP term ROUTES then reject
• C. set policy-options policy-statement ISP term REST then reject
• D. set policy-options as-path LOCAL-ROUTES "()"

正解: C,D

 

質問 48
Exhibit:



R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs Referring to the exhibit, which configuration change will solve this issue?

• A. Configure the bootstrap priority on R2 to be the same as R3.
• B. Configure the group-range parameter to be the same on R2 and RCA
• C. Configure the join-load-balance parameter under PIM on R4.
• D. Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.

正解: C

 

質問 49
Which two statements about IS-IS are correct? (Choose two.)

• A. A Level 1 router can only form adjacencies with other Level 1 routers.
• B. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.
• C. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers.
• D. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems in other IS-IS areas.

正解: A,C

 

質問 50
Exhibit:

You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?

• A. Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp I3vpn.0 routing table
• B. Configure the vrf-export parameter and apply the policy under the edit routing-instances vpn-a hierarchy.
• C. Configure the export parameter and apply the policy to the my-ext-group BGP group configuration.
• D. Configure the import parameter and apply the policy to the my-ext-group BGP group configuration.

正解: B

 

質問 51
Exhibit:

You are troubleshooting BGP routing issues between two MX Series routers. The BGP session is established but no BGP routes are being communicated.
What are two reasons for this problem? (Choose two.)

• A. table ii No export routing policy is applied.
• B. The peers are in different ASs.
• C. No active BGP routes are in the inet.0 table
• D. The peer type should be external.

正解: A,C

 

質問 52
......

2022年最新の実際にある検証済みのJN0-663問題集：https://www.passtest.jp/Juniper/JN0-663-shiken.html

必ず合格できるJuniper JN0-663試験で正確な95問題と解答あります：https://drive.google.com/open?id=1SSv7Be9TboUYTL9mJmoeNAz_2z8_Ay2R