[2023年06月最新リリース]5V0-42.21問題集でVMware SD-WAN Design and Deploy 2021認証
最新の完璧な5V0-42.21問題集問題と解答で100%パスさせます
VMware 5V0-42.21 認定を取得することにより、IT プロフェッショナルは、様々な組織的文脈で VMware SD-WAN ソリューションを設計し展開するために必要な知識とスキルを持っていることを証明できます。この認定は業界で非常に高く評価され、IT プロフェッショナルがキャリアを進め、競争の激しい求人市場で差別化するのに役立ちます。
VMware SD-WAN Design and Deploy Skills認定試験（5V0-42.21とも呼ばれます）は、VMware SD-WANテクノロジーとその展開について確固たる理解を持つITプロフェッショナルを対象としています。この試験は、企業顧客向けにVMware SD-WANソリューションを設計、構成、および展開するために必要な知識とスキルを検証することを意図しています。この認定試験は、ソフトウェア定義ネットワークの分野でキャリアの見通しを向上させたいネットワークアーキテクト、ネットワークエンジニア、およびその他のITプロフェッショナルに最適です。
質問 # 21
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?
- A. Static
- B. BGP
- C. RIP Version 2
- D. OSPF
正解：C
質問 # 22
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?
- A. Multi-Path
- B. Direct
- C. Backhaul
- D. CoS mapping
正解：B
質問 # 23
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. Password configured in cloud_init
- B. adnim
- C. velocloud
- D. No password required
正解：A
質問 # 24
An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different Partner Gateways.
Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?
- A. Configure each partner Gateway as a Controller.
- B. Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.
- C. Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.
- D. Add Controller role to each Partner Gateway.
正解：B
質問 # 25
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. VCE cluster members should have unique IP addresses on its WAN interfaces
- B. A VCE cluster requires one dedicated interface for HA sync
- C. VCF clusters member sync flow tables between themselves.
- D. One VCE cluster can be formed with both virtual and hardware at the same lime
正解：C
質問 # 26
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDF 2426
- B. TCP 80
- C. UDP 500
- D. TCP 443
正解：A
質問 # 27
What are three key benefits of VMware SD-WAN? (Choose three )
- A. Gain visibility across any link
- B. Reduce the burden on MPLS
- C. Automated configuration of cloud resources
- D. Layer 2 VPNs between sites
- E. Provision Edges in minutes
- F. Remove requirement of Edge devices
正解：B、C、F
質問 # 28
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate Accepted
- B. Certificate Requited
- C. Certificate Enabled
- D. Certificate Activated
- E. Certificate ate Optional
- F. Certificate Disabled
正解：A、C、F
質問 # 29
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 6 segments
- B. 5 segments
- C. 2 segments
- D. 4 segments
正解：B
質問 # 30
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- D. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
正解：B
質問 # 31
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Orchestrator
- B. VMware SD-WAN Controller
- C. VMware SD-WAN Hub
- D. VMware SD-WAN Edge
正解：B
質問 # 32
What Is a typical use case for the deployment of a VMware SU-WAN Partner Gateway?
- A. Provide connectivity between multiple enterprise customers over private circuits
- B. Provide mite transport m a service provider backbone tor interconnecting a global customer SD-WAN branches.
- C. Interconnect branches/remote sites of a single enterprise customer to the internet
- D. Get improved flow analytics for all traffic in the SD-WAN network
正解：B
質問 # 33
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. Cloud VPN
- B. SD-WAN Service Reachable on the private overlay
- C. Split Brain Detection
- D. VRRP
正解：C
解説：
https://docs.vmware.com/en/VMware-SD-WAN/3.3/VMware-SD-WAN-by-VeloCloud-Administration-Guide/GUID-18DE770F-DF30-485D-8C3F-675D71C57556.html
質問 # 34
Which role(s) must be enable under Gateway configuration page to allow a VMware SD-WAN Gateway to build IPsec tunnels to non-VM SD-WAN?
- A. Control Plane + Data Plane + Partner Gateway
- B. Control Plane
- C. Control Plane + Secure VPN Gateway
- D. Control Plane + Data Plane + SecureVPN Gateway
正解：A
質問 # 35
A customer has a 10,000 branch site requirement arid must use a hub cluster in their design.
Which Mware SO- WAN best practice should be used when designing the cluster?
- A. BGP on LAN side
- B. MP BGP south bound
- C. Static routing
- D. BGP on WAN side
正解：B
質問 # 36
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 6 segments
- B. 5 segments
- C. 2 segments
- D. 4 segments
正解：B
質問 # 37
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
- B. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- C. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
- D. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
正解：A
質問 # 38
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Segments
- B. Firewall
- C. VLANs
- D. Business Policy
正解：A
質問 # 39
......
最新の5V0-42.21試験問題集でVMware試験トレーニング：https://www.passtest.jp/VMware/5V0-42.21-shiken.html
2023年最新のの問題5V0-42.21問題集で最新のVMware試験を使おう：https://drive.google.com/open?id=1ycqkLZ8hrNetSxpPfYvokRNZ1CG_nOXv