[2023年11月]更新のJuniper JN0-636実際のブレーン知能問題集
合格できるJN0-636試験更新されたJN0-636試験問題集PDFを獲得2023年更新
JN0-636認定を獲得した候補者は、Juniper Networks Security Solutionsの専門家として認識され、潜在的な雇用主とクライアントに専門知識を示すことができます。この認定は業界から高く評価されており、ネットワークセキュリティの分野でのキャリアを促進する優れた方法です。
Juniper JN0-636 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 # 34
Click the Exhibit button.
[edit security]
user@host# show policies
global {
policy new-policy {
match {
source-address any;
destination-address any;
application junos-https;
}
then {
permit {
application-services {
application-firewall {
rule-set appfw;
}
}
}
}
}
}
[edit security]
user@host# show application-firewall
rule-sets appfw {
rule 1 {
match {
dynamic-application junos:SSL;
}
then {
permit;
}
}
rule 2 {
match {
dynamic-application junos:HTTP;
}
then {
reject;
}
}
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. HTTPS traffic is dropped.
- B. HTTPS traffic is permitted.
- C. HTTP traffic is dropped.
- D. HTTP traffic is permitted.
正解：B、C
質問 # 35
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configured solution allows IPv6 to IPv4 translation.
- B. External hosts cannot initiate contact.
- C. The IPv6 address is invalid.
- D. The configured solution allows IPv4 to IPv6 translation.
正解：A、C
質問 # 36
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet matches the default security policy.
- B. The packet is processed as host inbound traffic.
- C. The packet is processed in the first path packet flow.
- D. The packet matches a configured security policy.
正解：A、B
質問 # 37
Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)
- A. Configure static NAT on the SRX Series devices.
- B. Configure IPsec Transport mode.
- C. Identify two neutral IPv4 address spaces for address translation.
- D. Connect the competitor network using IPsec policy-based VPNs.
正解：A、D
質問 # 38
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.
What is the cause of the error?
- A. A firewall is blocking HTTPS on fxp0
- B. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- C. The SRX Series device certificate does not match the JATP certificate
- D. The fxp0 IP address is not routable
正解：B
質問 # 39
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
- A. The ETI events are false positives.
- B. The C&C events are false positives.
- C. The infected host score is globally set above a threat level of 5.
- D. The infected host score is globally set bellow a threat level of 5.
正解：A
質問 # 40
Click the Exhibit button.
userehost# run show route
inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 00:05:06
> to 172.16.1.1 via ge-0/0/1.0
172.16.1.0/24 *[Direct/O] 00:05:06
> via ge-0/0/1.0
172.16.1.3/32 *[Local/0] 00:05:07
Local via ge-0/0/1.0
192.168.200.2/32 *[Local/0] 00:05:07
Reject
vr-a.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - =
Last Active, * = Both
192.168.1.0/24 *[Direct/0] 00:01:05
> via ge-0/0/2.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/2.0
vr-b.inet.0: 2 destinations, 2 routes (2 active, 0 holddcwn, 0 hidden)
+ = Active Route, - =
Last Active, * = Both
192.168.1.0/24 *[Direct/O] 00:01:05
> via go-0/0/3.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/3.0
User 1 will access Server 1 using IP address 10.2.1.1.
You need to ensure that return traffic is able to reach User 1 from Server 1.
Referring to the exhibit, which two configurations allow this communication (Choose two.)
[edit security nat static]
- A. user@host# show
rule-set server-nat {
from zone [ junos-host untrust ];
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
routing-instance vr-b;
}
}
}
}
}
[edit security nat static] - B. user@host# show
rule-set server-nat {
from zone [ untrust ];
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
}
}
}
}
}
[edit security nat static] - C. user@host# show
rule-set server-nat {
from zone untrust;
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
routing-instance vr-a;
}
}
}
}
}
[edit security nat static] - D. user@host# show
rule-set in {
from zone untrust;
to zone cust-a;
rule overload {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
正解：A、C
質問 # 41
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.
- A. You can use SCEP to accomplish this behavior.
- B. You can use SPKI to accomplish this behavior.
- C. You can use OCSP to accomplish this behavior.
- D. You can use CRL to accomplish this behavior.
正解：A
解説：
Certificate Renewal
The renewal of certificates is much the same as initial certificate enrollment except you are just replacing an old certificate (about to expire) on the VPN device with a new certificate. As with the initial certificate request, only manual renewal is supported. SCEP can be used to re-enroll local certificates automatically before they expire. Refer to Appendix D for more details.
質問 # 42
You want to configure a threat prevention policy.
Which three profiles are configurable in this scenario? (Choose three.)
- A. SSL proxy profile
- B. malware profile
- C. infected host profile
- D. device profile
- E. C&C profile
正解：A、C、D
質問 # 43
Click the Exhibit button.
You have recently committed the IPS policy shown in the exhibit. When evaluating the expected behavior, you notice that you have a session that matches all the rules in your IPS policy.
In this scenario, which action would be taken?
- A. no-action
- B. close-client-and-server
- C. ignore-connection
- D. drop packet
正解：A
解説：
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-idp-policy-rules- and-rulebases.html
質問 # 44
You are connecting two remote sites to your corporate headquarters site.You must ensure that all traffic is secured and sent directly between sites In this scenario, which VPN should be used?
- A. IPsec ADVPN
- B. Layer 2 VPN
- C. full mesh Layer 3 VPN with EBGP
- D. hub-and-spoke IPsec VPN
正解：D
質問 # 45
As an SRX administrator, you must find all encrypted sessions on an SRX Series device.
Which command would you use to accomplish this task?
- A. show security ike security-associations
- B. show security ike tunnel-map
- C. show security flow session tunnel
- D. show security flow session encrypted
正解：D
質問 # 46
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used after the Juniper Seclntel block list feed.
- B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- C. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- D. This custom block list feed will be used before the Juniper Seclntel
正解：A
質問 # 47
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
正解：D
解説：
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/ref/statement/family-ethernet-switching-edit-interfaces-qfx-series.html#statement-name-statement__d26608e73
質問 # 48
You have noticed a high number of TCP-based attacks directed toward your primary edge device.
You are asked to configure the IDP feature on your SRX Series device to block this attack.
Which two IDP attack objects would you configure to solve this problem? (Choose two.)
- A. Protocol anomaly
- B. Network
- C. Signature
- D. host
正解：A、C
質問 # 49
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet is dropped before making an SSH connection.
- B. The packet's destination is to an interface on the SRX Series device.
- C. The packet is allowed to make an SSH connection.
- D. The packet originated within the Trust zone.
- E. The packet's destination is to a server in the DMZ zone.
正解：A、B、D
質問 # 50
While troubleshooting security policies, you added the count action.
Where do you see the result of this action?
- A. In the show security policies detail command output.
- B. In the show security policies hit-count command output.
- C. In the show firewall log command output.
- D. In the show security flow statistics command output.
正解：C
質問 # 51
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. Junos Space
- B. JATP Appliance
- C. JIMS
- D. JSA
正解：C
解説：
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
質問 # 52
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit.
The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
- B. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
- C. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
- D. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
正解：B
質問 # 53
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The session information indicates that the IPsec tunnel has not been established
- B. The remote gateway address for the IPsec tunnel is 10.20.20.2
- C. The local gateway address for the IPsec tunnel is 10.20.20.2
- D. NAT is being used to change the source address of outgoing packets
正解：B
質問 # 54
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to switching mode.
- B. You must change the global mode to transparent bridge mode.
- C. You must change the global mode to security bridging mode
- D. You must change the global mode to security switching mode.
正解：C
質問 # 55
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of three interfaces.
- B. The collector must have a minimum of five interfaces.
- C. The collector must have a minimum of four interfaces.
- D. The collector must have a minimum of two interfaces.
正解：C
解説：
https://www.juniper.net/documentation/en_US/release-
independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
質問 # 56
Exhibit
The show network-access aaa radius-servers command has been issued to solve authentication issues.
Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (Choose TWO)
- A. 192.168.30.191
- B. 192.168.30.188
- C. 192.168.30.190
- D. 200l:DB8:0:f101;:2
正解：A、B
質問 # 57
......
更新されたJN0-636パスして合格保証試験問題集正確で更新された問題：https://www.passtest.jp/Juniper/JN0-636-shiken.html
JN0-636試験知能問題集で学習ノートと理論：https://drive.google.com/open?id=1QkDgDlUBvQugT7dbH0R-1_Nt_t2DDKsB