[2023年12月]更新のH35-481_V2.0試験資料Huawei学習ガイド
有効な問題最新版を試そうH35-481_V2.0テスト解釈H35-481_V2.0有効な試験ガイド
Huawei H35-481_V2.0 認定試験は、理論的な知識と実践的な知識の両方をカバーした包括的なテストです。試験は、5G RAN 技術の理解をテストする複数選択問題と、この知識を実際のシナリオに適用する能力を評価する実践的な演習で構成されています。
Huawei H35-481_V2.0（HCIP-5G-RAN V2.0）試験は、5G無線アクセスネットワークの計画、設計、最適化に必要なスキルと知識を検証する認定です（RANS）。 5Gテクノロジーは急速に進化しており、5G RANの専門知識を持つ専門家の需要が増加しています。 Huawei H35-481_V2.0試験は、ネットワーク計画、実装、最適化、トラブルシューティングなど、5G RANテクノロジーの候補者の習熟度をテストするように設計されています。
質問 # 23
Which of the following parameters In the NR MIB message indicates the time-domain position of CORESET 0?
- A. SSB-subcarrier offset
- B. Most significant four bits of PDCCH-configSIBl
- C. System frame number
- D. Least significant four bits of PDCCH-configSIBl
正解：D
解説：
In 5G NR, the Master Information Block (MIB) message is transmitted on the Physical Broadcast Channel (PBCH) and contains information that is used by the UEs to synchronize to the cell and obtain basic system information. The parameters in the NR MIB message that indicate the time-domain position of CORESET 0 are the least significant four bits of PDCCH-configSIBl.
質問 # 24
The segmentation method is the most important method for isolating faults on the transport network. Different methods are used for different fault types.
- A. False
- B. True
正解：B
質問 # 25
Which of the following 5G network technologies can reduce IoV latency?
- A. Massive MIMO
- B. SDN
- C. NFV
- D. MEC
正解：D
解説：
MEC (Mobile Edge Computing) is a network technology that enables the deployment of computing and storage resources at the edge of the network, closer to the end-users. This can significantly reduce the latency for various applications, such as IoT, AR/VR and IoV. By moving the computing and storage resources closer to the end-users, the data can be processed and stored closer to the source, reducing the time and distance that the data needs to travel. This can reduce the overall latency and improve the user experience.
According to the official GSMA white paper on 5G and IoV, MEC can reduce latency by bringing computing resources closer to the edges of the network. This can be particularly beneficial for IoV applications, which require low latency and high reliability. Additionally, NFV (Network Function Virtualization), Massive MIMO (Multiple Input Multiple Output) and SDN (Software Defined Networking) can also be used to improve performance and reduce latency in 5G networks. Reference: https://www.gsma.com/iot/wp-content/uploads/2019/06/GSMA_5G_IoV_White_Paper_Final.pdf
質問 # 26
Which of the following statements about a self-contained slot is Incorrect?
- A. Faster downlink hybrid automatic repeat request (HARQ) feedback and UL data scheduling to reduce the RTT.
- B. Prolonged sounding reference signal (SRS) transmission period to track fast channel changes and Improve MIMO performance.
- C. Increased GP overhead due to frequent uplink-downlink switching.
- D. High requirements on latency of terminal hardware processing.
正解：A
質問 # 27
Which of the following are the functions of SRSs In NR?
- A. To obtain the uplink channel quality
- B. Uplink grant
- C. Uplink beam management
- D. Downlink beamforming weight calculation
正解：A、C、D
解説：
The functions of SRSs in NR include downlink beamforming weight calculation, obtaining the uplink channel quality, and uplink beam management. Uplink grants are not related to SRSs.
https://www.sciencedirect.com/topics/engineering/extended-cyclic-prefix Extended Cyclic Prefix - an overview | ScienceDirect Topics
https://www.sciencedirect.com/topics/engineering/extended-cyclic-prefix
http://www.techplayon.com/5g-nr-numerology-subcarrier-spcaing-scs/
5G NR Numerology - Subcarrier Spcaing (SCS) - Techplayon
http://www.techplayon.com/5g-nr-numerology-subcarrier-spcaing-scs/
https://rfmw.em.keysight.com/wireless/helpfiles/89600B/WebHelp/Subsystems/wlan-ofdm/content/ofdm_basicprinciplesoverview.htm Concepts of Orthogonal Frequency Division Multiplexing (OFDM ...
https://rfmw.em.keysight.com/wireless/helpfiles/89600B/WebHelp/Subsystems/wlan-ofdm/content/ofdm_basicprinciplesoverview.htm
質問 # 28
Which of the following functions is provided by the network layer in the transport protocol stack?
- A. MAC forwarding
- B. Transmission of binary data flows
- C. Physical medium access
- D. Addressing and route selection
正解：B
質問 # 29
How many OM channels does a gNodeB support at most?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 30
When a GPS divider is used, the maximum distance between the GPS antenna and the BBU is shortened.
- A. False
- B. True
正解：B
質問 # 31
Which of the following 5G technologies can be used to ensure the QoS and security of smart grid services?
- A. 5G E2E slicing
- B. 5G super uplink
- C. 5G DNN private line
- D. 5G carrier aggregation
正解：D
質問 # 32
Which of the following logs is used to analyze the relationship between gNodeB device faults and operations?
- A. Debug log
- B. Security log
- C. Run log
- D. Operation log
正解：B
質問 # 33
The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB.
- A. False
- B. True
正解：B
解説：
The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB. Executing multiple commands at the same time can cause system instability, so it is not recommended to do so.
質問 # 34
If the subcarrier spacing (SCS) of a low-frequency cell Is 30 kHz and the bandwidth of each RB Is 360 kHz, theoretically, what value should the noise (dBm) over the air interface be?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 35
Which of the following Information Is not carried In the DCI of NR?
- A. PUSCH scheduling
- B. PMI report
- C. PDSCH scheduling
- D. PUSCH power control
正解：D
解説：
According to the official 3GPP specification, the DCI of NR does not carry PUSCH power control information. It carries scheduling information for the PUSCH and PDSCH and a PMI report. Reference: https://www.3gpp.org/DynaReport/38-series.htm
質問 # 36
In CRAN deployment, the one-to-four cascading mode can be used for GPS clock configuration. How many BBUs at most can a GPS be connected to?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 37
When a GPS divider is used, the maximum distance between the GPS antenna and the BBU is shortened.
- A. False
- B. True
正解：B
解説：
When a GPS divider is used, the maximum distance between the GPS antenna and the BBU is shortened. This is because the divider splits the signal from the antenna into multiple signals that can be distributed to multiple BBUs, thus reducing the distance between the antenna and the BBUs. Sources: [1] Rymaruk, O., and Kovalenko, I. "GPS signal dividers for cellular base stations." IEEE Antennas and Propagation Magazine, vol. 56, no. 3, pp. 121-126, 2014. https://ieeexplore.ieee.org/document/6833669. [2] Albasri, N., and Al-Naffouri, T.Y. "GPS signal distribution for a 4G/5G distributed antenna system." IEEE Access, vol. 7, pp. 100371-100382, 2019. https://ieeexplore.ieee.org/document/8793094.
質問 # 38
If the configuration data of a new BTS5900 base station cannot be loaded remotely, which of the following can be used to for local data configuration?
- A. Loading through the Web LMT
- B. Loading through the centralized maintenance system
- C. Loading through the MAE
- D. Loading through the PnP mode
正解：D
解説：
According to Huawei's BTS5900 Product Brochure, PnP (Plug and Play) mode can be used for local data configuration if the configuration data of a new BTS5900 base station cannot be loaded remotely. In PnP mode, the BTS5900 automatically obtains the IP address and configuration data from the OMC or other device through DHCP. The BTS5900 also supports manual configuration of the IP address and configuration data.
質問 # 39
Which of the following Information Is contained in a master Information block (MIB)?
- A. dmrs-TypeA-Position
- B. PDCCH ConfigSIB1
- C. Offset from PointA
- D. System frame number
正解：A
質問 # 40
Which of the following scenario using the GUI configuration mode in MAE- Deployment?
- A. Configuration of parameters in multiple MOs
- B. Reconfiguration of a single NE
- C. Configuration of parameters in an MO
- D. Batch reconfiguration of NEs
正解：C
質問 # 41
Generally, the gNodeB synchronizes time information from the OSS. Which of the following commands is used to configure the IP address of the time server?
- A. ADD GPS
- B. ADD IPCLKUNK
- C. ADD OMCH
- D. ADD NTPC
正解：D
解説：
In a gNodeB, the time information is synchronized from the OSS using the Network Time Protocol (NTP). The ADD NTPC command is used to configure the IP address of the NTP server, which is the time server that the gNodeB synchronizes with. This command is used to specify the IP address of the NTP server, the NTP version, and other parameters related to time synchronization.
質問 # 42
If the subcarrier spacing (SCS) of a low-frequency cell Is 30 kHz and the bandwidth of each RB Is 360 kHz, theoretically, what value should the noise (dBm) over the air interface be?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
解説：
The theoretically noise (dBm) over the air interface should be -116 dBm. The noise is calculated by subtracting the noise figure of the receiver from the thermal noise floor, which is determined by the subcarrier spacing and the bandwidth of each Resource Block (RB). In this case, the subcarrier spacing is 30 kHz and the bandwidth of each RB is 360 kHz, so the thermal noise floor is -116 dBm.
質問 # 43
Which of the following commands is used to map DSCPs and VLAN priorities?
- A. MOD DSCPMAP
- B. SET PHBMAP
- C. SET DSCPMAP
- D. MOD PHBMAP
正解：A
質問 # 44
What Is the maximum number of pRRUs on a CPRI link for RF combination?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
解説：
The maximum number of pRRUs on a CPRI link for RF combination is 16. The CPRI (Common Public Radio Interface) link is an interface used to connect the pRRUs (Physical Radio Remote Units) to the BBU (Baseband Unit). The pRRUs contain the radio modules and antennas, while the BBU contains the baseband processing unit. The CPRI link allows the BBU to send and receive data from the pRRUs, enabling them to be combined for RF combination. Sources: [1] Chen, F., and Zhang, Y. "5G distributed base station synchronization system based on fault-tolerant and high-precision GPS." In 2020 IEEE International Conference on Communications Workshops (ICC Workshops), pp. 1-5, 2020. https://ieeexplore.ieee.org/document/9160372. [2] Fan, X., and Zhao, X. "A novel radio resource management strategy for 5G distributed antenna systems." In 2019 IEEE International Conference on Communications Workshops (ICC Workshops), pp. 1-6, 2019. https://ieeexplore.ieee.org/document/
質問 # 45
......
H35-481_V2.0試験問題と解答：https://www.passtest.jp/Huawei/H35-481_V2.0-shiken.html
H35-481_V2.0実際の問題解答PDFは100%カバー率でリアル試験問題：https://drive.google.com/open?id=11T_o1x4dQV2pRhxT8upGeMcYFwkY_gmK