[2024年更新]合格できるSolarWinds Hybrid-Cloud-Observability-Network-Monitoring試験最新153問題
ゲット2024年最新の無料SolarWinds Hybrid-Cloud-Observability-Network-Monitoring試験問題 アンサー
質問 # 28
Which two of the following services can be monitored in network insight with network health, performance monitor, and NCM features installed in hybrid cloud observability? (Choose two.)
- A. global protect VPN
- B. high availability details
- C. access lists
- D. policy details
正解：A、B
質問 # 29
In live mode, how frequently is log viewer data automatically refreshed?
- A. 1 minute
- B. 10 minutes
- C. 1 second
- D. 10 seconds
正解：D
質問 # 30
Which statement is true regarding universal device pollers (UDP)?
- A. poll multiple object IDs (QIDs) for a given technology
- B. polled values are displayed in dedicated resources
- C. perform operations /transformations on polled data
- D. polled values are displayed in existing resources
正解：C
質問 # 31
When a parent object goes down or becomes unresponsive, all interfaces on the switch will also be unresponsive. Though they may be working, "unreachable" status is used because the parent node reports as
"down" and a status cannot be determined. Any alerts where the trigger condition includes node status equal to
"down" are not triggered.
In which section of SolarWinds' platform can an administrator configure the status of child objects as
"unreachable" instead of "down" or "unknown"?
- A. core thresholds
- B. polling settings
- C. node status participation
- D. manage dependencies
正解：D
質問 # 32
Which two of the following locations can be checked for network hardware health functionality? (Choose two.)
- A. list resources
- B. node properties
- C. manage sensors
- D. device view
正解：A、B
質問 # 33
What is the correct sequence of steps to create a device studio poller?
- A. Select the technology, assign the poller to node, specify the data source, and save the poller.
- B. Select the technology, specify the data source, assign the poller to node, and save the poller.
- C. Assign the poller to node, select the technology, specify the data source, and savethe poller.
- D. Select the technology, specify the data source, save the poller, and assign the poller to node.
正解：D
質問 # 34
The below error message is received.
How should this error be resolved?
- A. ensure the collector service is up
- B. change the IP address on the node or enable "allow matching nodes by another IP"
- C. only IP flow ingress applied on interfaces
- D. ensure the device is configured to send flow data to hybrid cloud observability (HCO)
正解：B
質問 # 35
A device studio poller is being built for node detail information. For the values supported, it has been decided to enter textual values instead of object IDs (OIDs). Which statements is true?
- A. If the textual value changes, it will update automatically.
- B. If the textual value changes on the node, the poller must be manually updated.
- C. If the textual value is misspelled, it will not poll correctly.
- D. Only textual values can be used for host names, all other values must be OlDs.
正解：B
質問 # 36
A custom application is to be monitored in hybrid cloud observability's flow monitoring features. How is this application added for monitoring?
- A. Add the application ports, then assign it to a machine.
- B. Ensure the application is using IPv6 then map it to a source.
- C. Custom application ports cannot be added they may only be edited.
- D. Add the source or destination machine, then map it to application ports.
正解：D
質問 # 37
It is noted in flow source view that some devices are showing "never received" in the last received flow column. It is verified that the flows are not being blocked by a firewall. What is the likely cause?
- A. a primary field of data is missing and being dropped
- B. flows are IPv6 and not supported by the network monitoring features
- C. interface is no longer monitored by the network monitoring features
- D. node is no longer monitored by the monitoring features
正解：A
質問 # 38
A router has been added for health and performance monitoring in hybrid cloud observability, however default SNMP polling data is not visible. Additional network devices have been added and SNMP metrics for those devices are now visible.
How should this issue be resolved?
- A. Perform an MIB database update and build custom pollers to monitor the device.
- B. Perform a firmware upgrade on the device to update its MIB file.
- C. Perform an SNMP walk and add the devices MIB file to SolarWinds' MIB database.
- D. Perform an MIB database update to update the default
正解：C
質問 # 39
Upon examining bandwidth utilization, it is confirmed that the total utilization and flow numbers do not match. What is the likely cause?
- A. flows do not contain all traffic in bandwidth numbers
- B. receivingboth IPv4 and IPv6 flows and not all are counted in total bandwidth
- C. a firewall is blocking the data flow configuration
- D. SNMP bandwidth numbers for the interface need to be adjusted in the console
正解：A
質問 # 40
A problem occurred on the main polling engine and the server fails. It is noted that statistics for the networking devices polled by a universal device poller (UDP) custom monitor are missing. Which two of the following reasons are possible causes of this event? (Choose two.)
- A. data collection for any UDPs stops on the server
- B. UDPs are tied to the polling engine on which they are hosted
- C. networking devices are not assigned to the UDP
- D. UDPs do not collect data from failover or hot standby engines
正解：A、B
質問 # 41
Which two of the following effects would apply to a situation where a NetPath probe polling interval is increased to 15 minutes from the default value of 10 minutes? (Choose two.)
- A. accuracy is decreased
- B. probe will not complete successfully
- C. probe is more likely to show all routes
- D. accuracy is increased
正解：A、C
質問 # 42
Which SNMP version will support MD5, SHA1, SHA256, and SHA512 authentication in SolarWinds' platform?
- A. version 3
- B. version 1
- C. version 2c
- D. version 2
正解：A
質問 # 43
Probing interval determines how often and how long information is polled from the network path. Which two of the following statements are true regarding probing intervals? (Choose two.)
- A. probing less frequently allows the data to update faster but decreases data accuracy
- B. probing more frequently allows the data to update faster but decreases data accuracy
- C. probing more frequently allows the data to update more slowly and increases data accuracy
- D. probing less frequently allows the data to update more slowly and increases data accuracy
正解：B、D
質問 # 44
Which two of the following functions are tied to SolarWinds' MIB database? (Choose two.)
- A. SolarWinds' MIB database maps object IDs (OIDs) to their textual names.
- B. SolarWinds' MIB database enables automatic polling of devices.
- C. SolarWinds' MIB database defines what kind of pollers can be built for the metric.
- D. aSolarWinds' MIB database updates OIDs on the device during the polling process.
正解：A、C
質問 # 45
A universal device poller (UDP) is being built for a metric to monitor in a radial gauge of a web console.
When a gauge resource in the poller is to be selected, it is found that the resource is grayed out. What could be causing this?
- A. UDP does not support gauges to display polled information.
- B. object ID (OID) polled does not support radial gauge.
- C. OID polled is not supported by the device.
- D. OID polled is not in current MIB file of MIB database.
正解：B
質問 # 46
......
高合格率Hybrid-Cloud-Observability-Network-Monitoringテスト問題集解答と正解153問題と回答：https://www.passtest.jp/SolarWinds/Hybrid-Cloud-Observability-Network-Monitoring-shiken.html
Hybrid-Cloud-Observability-Network-Monitoring問題集PDFとテストエンジン試験問題：https://drive.google.com/open?id=1kmKYQ8h8qzQbc-xCPYENCiNevtOU5cZB