[2024年01月]更新のNCP-US-6.5試験問題集、NCP-US-6.5練習テスト問題
検証済みNCP-US-6.5問題集PDF資料 [2024]
Nutanix NCP-US-6.5 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 41
Which two steps are required for enabling Data Lens? (Choose two.)
- A. Configure the Data Services IP in Prism Central.
- B. Configure a MyNutanix account to access the Data Lens console-
- C. Add File Services VM admin credentials to a MyNutanix account.
- D. In Prism, enable Pulse health monitoring.
正解：A
解説：
The two steps that are required for enabling Data Lens are:
In Prism, enable Pulse health monitoring: Pulse is a feature that collects diagnostic and usage information from Nutanix clusters and services and sends it to Nutanix for analysis and support purposes. Pulse health monitoring is a feature that monitors the health status of Nutanix clusters and services and sends alerts to Nutanix if any issues are detected. To enable Data Lens, Pulse health monitoring must be enabled in Prism Element or Prism Central.
Configure the Data Services IP in Prism Central: Data Services IP is an IP address that is used for communication between Prism Central and Data Lens. Data Services IP must be configured in Prism Central before enabling Data Lens for any file server. Data Services IP must be routable from both Prism Central and Data Lens. Reference: Nutanix Files Administration Guide, page 93; Nutanix Data Lens Deployment Guide
質問 # 42
An administrator created a bucket for an upcoming project where internal users as well as an outside consultant .... Object Browser. The administrator needs to provide both internal and consultant access to the same bucket.
The organization would like to prevent internal access to the consultant, based on their security policy.
Which two items are requires to fulfill this requirement (Choose two.)
- A. Generate access keys using third-party software.
- B. Generate access keys based on directory and email-based users.
- C. Install third-party software for bucket access to all users.
- D. Configure Directory Services under the Access Keys section
正解：B、D
解説：
Nutanix Objects supports directory services integration, which allows administrators to configure access keys based on directory and email-based users. This enables granular access control and security for buckets and objects. The administrator can configure directory services under the Access Keys section in Prism Central, and then generate access keys for internal users from the directory service and for the consultant from an email address2. Reference: Nutanix Objects Administration Guide2
質問 # 43
Before upgrading Files or creating a file server, which component must first be upgraded to a compatible version?
- A. FSVM
- B. File Analytics
- C. FSM
- D. Prism Central
正解：D
解説：
The component that must first be upgraded to a compatible version before upgrading Files or creating a file server is Prism Central. Prism Central is a web-based user interface that allows administrators to manage multiple Nutanix clusters and services, including Files. Prism Central must be upgraded to a compatible version with Files before upgrading an existing file server or creating a new file server. Otherwise, the upgrade or creation process may fail or cause unexpected errors. Reference: Nutanix Files Administration Guide, page 21; Nutanix Files Upgrade Guide
質問 # 44
An administrator is looking for a tool that includes these features:
* Permission Denials
* Top 5 Active Users
* Top 5 Accessed Files
* File Distribution by Type
Nutanix tool should the administrator choose?
- A. File Analytics
- B. Files Console
- C. File Server Manager
- D. Prism Central
正解：A
解説：
The tool that includes these features is File Analytics. File Analytics is a feature that provides insights into the usage and activity of file data stored on Files. File Analytics consists of a File Analytics VM (FAVM) that runs on a Nutanix cluster and communicates with the File Server VMs (FSVMs) that host the file shares. File Analytics can display various reports and dashboards that include these features:
Permission Denials: This report shows the number of permission denied events for file operations, such as read, write, delete, etc., along with the user, file, share, and server details.
Top 5 Active Users: This dashboard shows the top five users who performed the most file operations in a given time period, along with the number and type of operations.
Top 5 Accessed Files: This dashboard shows the top five files that were accessed the most in a given time period, along with the number of accesses and the file details.
File Distribution by Type: This dashboard shows the distribution of files by their type or extension, such as PDF, DOCX, JPG, etc., along with the number and size of files for each type. Reference: Nutanix Files Administration Guide, page 93; Nutanix File Analytics User Guide
質問 # 45
A company uses Linux and Windows workstations. The administrator is evaluating solution for their file storage needs.
The solution should support these requirements:
* Distributed File System
* Active Directory integrated
* Scale out architecture
- A. Objects
- B. Volumes
- C. Mine
- D. Files
正解：D
解説：
The solution that meets the company's requirements for their file storage needs is Files. Files is a feature that allows users to create and manage file server instances (FSIs) on a Nutanix cluster. FSIs can provide SMB and NFS access to file shares and exports for different types of clients. Files supports these requirements:
Distributed File System: Files uses a distributed file system that spans across multiple FSVMs (File Server VMs), which improves scalability, performance, and availability.
Active Directory integrated: Files can integrate with Active Directory for authentication and authorization of SMB clients and multiprotocol NFS clients.
Scale out architecture: Files can scale out by adding more FSVMs to an existing FSI or creating new FSIs on the same or different clusters. Reference: Nutanix Files Administration Guide, page 27; Nutanix Files Solution Guide, page 6
質問 # 46
Which error logs should the administrator be reviewing to determine why the relates service is down?
- A. Tcpkill.log
- B. Arithmos.ERROR
- C. Solver.log
- D. Cerebro.ERROR
正解：D
解説：
The error log that the administrator should review to determine why the relay service is down is Cerebro.ERROR. Cerebro is a service that runs on each FSVM and provides relay functionality for Data Lens. Relay service is responsible for collecting metadata and statistics from FSVMs and sending them to Data Lens via HTTPS. If Cerebro.ERROR log shows any errors or exceptions related to relay service, it can indicate that relay service is down or not functioning properly. Reference: Nutanix Files Administration Guide, page 23; Nutanix Data Lens User Guide
質問 # 47
Life Cycle manager must the compatible versions of which two components before installing or upgrading Files? (Choose two.)
- A. Acropolis Operating System
- B. Active Directory Services
- C. File Server Mobile
- D. Nutanix Cluster Check
正解：D
解説：
Before installing or upgrading Files, Life Cycle Manager (LCM) must check the compatibility versions of Nutanix Cluster Check (NCC) and Acropolis Operating System (AOS). NCC is a framework of scripts that helps diagnose cluster health, and AOS is the core operating system that runs on each node in a Nutanix cluster. LCM will not proceed with the installation or upgrade if NCC or AOS versions are incompatible with Files. Reference: Nutanix Files Administration Guide, Nutanix Cluster Check Guide
質問 # 48
Users are complaining about having to reconnecting to share when there are networking issues.
Which files feature should the administrator enable to ensure the sessions will auto-reconnect in such events?
- A. Durable File Handles
- B. Multi-Protocol Shares
- C. Connected Shares
- D. Workload Optimization
正解：A
解説：
The Files feature that the administrator should enable to ensure the sessions will auto-reconnect in such events is Durable File Handles. Durable File Handles is a feature that allows SMB clients to reconnect to a file server after a temporary network disruption or a client sleep state without losing the handle to the open file. Durable File Handles can improve the user experience and reduce the risk of data loss or corruption. Durable File Handles can be enabled for each share in the Files Console. Reference: Nutanix Files Administration Guide, page 76; Nutanix Files Solution Guide, page 10
質問 # 49
Refer to the exhibit.
What does the ''X'' represent on the icon?
- A. Share Disconnected File
- B. Corrupt ISO
- C. Tiered File
- D. Distributed shared file
正解：D
解説：
The "X" on the icon represents a distributed shared file, which is a file that belongs to a distributed share or export. A distributed share or export is a type of SMB share or NFS export that distributes the hosting of top-level directories across multiple FSVMs. The "X" indicates that the file is not hosted by the current FSVM, but by another FSVM in the cluster. The "X" also helps to identify which files are eligible for migration when using the Nutanix Files Migration Tool. Reference: Nutanix Files Administration Guide, page 34; Nutanix Files Migration Tool User Guide, page 10
質問 # 50
An existing Object bucket was created for backups with these requirements:
* WORM policy of one year
* Versioning policy of one year
* Lifecycle policy of three years
A recent audit has reported a compliance failure. Data that should be retained for three years has been deleted prematurely.
How should the administrator resolve the compliance failure within Objects?
- A. Modify the existing bucket versioning policy from one year to three years.
- B. Create a tiering policy to store deleted data on cold storage for three years.
- C. Recreate a new bucket with the retention policy of three years.
- D. Modify the existing bucket WORM policy from one year to three years.
正解：D
解説：
The administrator should resolve the compliance failure within Objects by modifying the existing bucket WORM (Write-Once Read-Many) policy from one year to three years. WORM is a feature that prevents anyone from modifying or deleting data in a bucket while the policy is active. WORM policies help comply with strict data retention regulations that mandate how long specific data must be stored. The administrator can extend the WORM retention period for a bucket at any time, but cannot reduce it or delete it. By extending the WORM policy from one year to three years, the administrator can ensure that data in the bucket is retained for the required duration and not deleted prematurely. Reference: Nutanix Objects User Guide, page 17; Nutanix Objects Solution Guide, page 9
質問 # 51
Which action is required to allow the deletion of file server audit data in Data Lens?
- A. Disable the File Server.
- B. Configure the audit trail target.
- C. Update the data retention period.
- D. Enable the File Server.
正解：C
解説：
The action that is required to allow the deletion of file server audit data in Data Lens is to update the data retention period. Data retention period is a setting that defines how long Data Lens keeps the file server audit data in its database. Data Lens collects and stores various metadata and statistics from file servers, such as file name, file type, file size, file owner, file operation, file access time, etc. Data Lens uses this data to generate reports and dashboards for file analytics and anomaly detection. The administrator can update the data retention period for each file server in Data Lens to control how long the audit data is kept before being deleted. Reference: Nutanix Files Administration Guide, page 98; Nutanix Data Lens User Guide
質問 # 52
What is the minimum and maximum file size limitations for Smart Tiering?
- A. 128 IOB minimum and 5 TiB maximum
- B. 64 KiB minimum and 15 TiB maximum
- C. 128 KiB minimum and 13 TiB maximum
- D. 64 KiB minimum and 5 TiB maximum
正解：D
解説：
Smart Tiering is a feature that allows Files to tier data across different storage tiers based on the file size and access frequency. Smart Tiering supports files with a minimum size of 64 KiB and a maximum size of 5 TiB2. Reference: Nutanix Files Administration Guide2
質問 # 53
How can an administrator deploy a new instance of Files?
- A. From LCM in Prism Central.
- B. From LCM in Prism Element.
- C. From the Storage view in Prism Element.
- D. From the Files Console view in Prism Central.
正解：D
解説：
The Files Console view in Prism Central is the primary interface for deploying and managing Files clusters. Administrators can use the Files Console to create a new instance of Files by providing the required information, such as cluster name, network configuration, storage capacity, and license key. Reference: Nutanix Files Administration Guide
質問 # 54
Within the Prism Central Entity > Services > Objects menu option, what is the correct task order for creating an object storage?
正解：
解説：
質問 # 55
Which two prerequisites are needed when deploying Objects to a Nutanix cluster? (Choose two.)
- A. DNS is configured on the PE.
- B. Data Services IP is configured on the PI
- C. AHV IPAM is disabled on the VLAN used for Objects.
- D. Microsegmentation is enabled.
正解：B
解説：
Nutanix Objects requires a Data Services IP to be configured on the Prism Infrastructure (PI) cluster, which is used to expose the S3 API endpoint for accessing buckets and objects. Nutanix Objects also requires AHV IP Address Management (IPAM) to be disabled on the VLAN used for Objects, as Objects uses its own DHCP service to assign IP addresses to the Objects VMs1. Reference: Nutanix Objects Administration Guide1
質問 # 56
An administrator has performed an AOS upgrade, but noticed that the compression on containers is not happening.
What is the delay before compression begins on the Files container?
- A. 60 minutes
- B. 24 hours
- C. 12 hours
- D. 30 minutes
正解：C
解説：
The delay before compression begins on the Files container is 12 hours. Compression is a feature that reduces the storage space required for data by applying an algorithm that eliminates redundant or unnecessary bits. Compression can improve the storage efficiency and performance of Files. Compression is enabled by default on the Files container and runs in the background as a low-priority task. Compression does not start immediately after an AOS upgrade, but waits for 12 hours to avoid interfering with other high-priority tasks or operations. Reference: Nutanix Files Administration Guide, page 24; Nutanix Files Solution Guide, page 10
質問 # 57
What is the most efficient way of enabling users to restore their files without administrator intervention in multiple Files shares?
- A. Add all FSVMs to a Consistency Group within a single asynchronous Protection Domain in PE.
- B. Click Enable Self Service Restore in the Edit wizard for each share in Shares tab from Files Console.
- C. Click Enable next to the name of the share in Manage Recovery Settings from Data Lens.
- D. Assign the same Category to all FSVMs and adding that Category to a single Protection Policy in PC.
正解：B
解説：
Nutanix Files allows users to restore their files from the snapshots taken by the protection policy. A protection policy is a set of rules that defines how often snapshots are taken, how long they are retained, and where they are replicated. A protection policy can be applied to one or more file shares. To enable users to restore their files without administrator intervention, the administrator must enable the Self Service Restore option for each share in the Files Console. This option adds a hidden folder named .snapshot in each share, which contains all the snapshots taken by the protection policy. Users can access this folder and browse the snapshots to find and restore their files. The administrator can also configure the permissions and quota for the .snapshot folder. Reference: Nutanix Files Administration Guide, page 75; Nutanix Files Self-Service Restore Guide
質問 # 58
......
最新のNCP-US-6.5実際の無料試験問題は更新された78問あります：https://www.passtest.jp/Nutanix/NCP-US-6.5-shiken.html
無料NCP-US-6.5試験ブレーン問題集認定ガイド問題と解答：https://drive.google.com/open?id=1EM2tqJCKtQZJkFO_0sE53dNH1qxcBUrA