[2024年01月08日] 最新をゲットせよ！3V0-42.20認定練習テスト問題と試験問題集
リアル3V0-42.20試験問題集解答で有効な3V0-42.20問題集PDF
3V0-42.20試験には60の多肢選択問題があり、135分以内に完了する必要があります。試験に合格するには、候補者は500点中300点以上の最低スコアを達成する必要があります。試験は、英語、日本語、中国語、韓国語で利用可能です。VMwareは、この試験に挑戦する前に、候補者がNSX-Tデータセンターの設計に少なくとも2年の経験を持っていることを推奨しています。合格者は、VMware Certified Advanced Professional-Network Virtualization Design 2021（VCAP-NV Design 2021）認定を受け取ります。
VMware 3V0-42.20試験は、VMware NSX-T Data Centerプラットフォームに関連するいくつかの領域において、ITプロフェッショナルの知識とスキルをテストするために設計された難しい試験です。試験では、NSX-Tアーキテクチャ、展開モデル、セキュリティ、自動化、および他のVMware製品との統合などのトピックが扱われます。候補者は、複数選択問題、ドラッグアンドドロップ問題、シナリオベースの問題に答えることで、これらの領域における熟練度を証明しなければなりません。
質問 # 19
Refer to the exhibit.
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
- A. 5 levels
- B. 4 levels
- C. 9 levels
- D. 3 levels
正解：A
質問 # 20
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop about ESXi Host networking:
* A total of 50 ESXi hosts to be configured as Transport Nodes.
* All ESXi hosts have a dedicated 2 × Intel 10Gbps Physical Network adapter for the Overlay Traffic.
To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies should the architect recommend? (Choose two.)
- A. Load Balance Port ID
- B. Load Balance Source
- C. Failover Order
- D. Load Balance Source MAC
- E. Load Balance Source Port ID
正解：C、E
質問 # 21
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
There are applications which use IPv6 addressing.
Network administrators are not familiar with NSX-T Data Center solutions.
Hosts can only be configured with two physical NICs.
There is an existing management cluster to deploy the NSX-T components.
Dynamic routing should be configured between the physical and virtual network.
There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)
- A. Dynamic routing should be configured between the physical and virtual network.
- B. Network administrators are not familiar with NSX-T Data Center solutions.
- C. There are applications which use IPv6 addressing.
- D. There is a storage array available to deploy NSX-T components.
正解：A
質問 # 22
Refer to the exhibit.
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
- A. 5 levels
- B. 4 levels
- C. 9 levels
- D. 3 levels
正解：A
質問 # 23
A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)
- A. remote gateway with support for IGP and VLAN priority
- B. deployed Load Balancer
- C. remote gateway with support for MP-BGP and VXLAN
- D. deployed Tier-1 gateway
- E. deployed Tier-0 gateway
正解：C、E
解説：
EVPN deployments require:
- A deployed Tier-0 gateway
- A remote gateway with support for MP-BGP and VXLAN
- An overlay virtual router with BGP and VLAN tagging capabilities.
EVPN is not compatible with the following services:
- Load Balancer
- VPN
Take from NSX-T ICM 3.0 Lecture Manual - Requirements and Limitations of EVPN section.
質問 # 24
A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
* identity platform must be highly available
* authentication must be performed by customer's existing SAML identity provider
* MFA must be performed by administrator to gain access to NSX Manager
Which identity deployments would meet the customer's requirements? (Choose the best answer.)
- A. NSX Manager OAuth 2.0 registered to a 3-node VMware Identity Manager cluster.
- B. NSX Manager OAuth 2.0 registered to a 2-node VMware Identity Manager cluster.
- C. NSX Manager OAuth 2.0 registered to a 2-node Active Directory Federation Services cluster
- D. NSX Manager OAuth 2.0 registered to a 3-node Active Directory Federation Services cluster.
正解：A
質問 # 25
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for Disaster Recovery (DR) in their company network. The network has a primary site and a secondary site. The ability to support outages with minimum loss of connectivity to the company's core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
- A. NSX-T Data Center using a registered third-party DR solution.
- B. NSX-T Data Center using built-in standard automation DR and secondary site recovery setup.
- C. NSX-T Data Center using an Orchestrator to recover VMs across sites.
- D. NSX-T Data Center using Federation and dependencies set between primary and secondary sites.
正解：D
解説：
NSX-T federation allows creating global routing constructs ( Routers & Segments) and one of the main use cases of federation is BCDR
質問 # 26
Which three choices are part of a Design Approach when discussing design alternatives and their effects?
(Choose three.)
- A. performance
- B. knowledge
- C. security
- D. budget
- E. cost
- F. backup
正解：A、B、C
質問 # 27
Which three choices are part of a Design Approach when discussing design alternatives and their effects? (Choose three.)
- A. performance
- B. knowledge
- C. security
- D. budget
- E. cost
- F. backup
正解：A、B、C
質問 # 28
Which selection must be taken into consideration when creating a Logical Design for a planned migration? (Choose the best answer.)
- A. An N-VDS can only attach to a single VLAN transport zone.
- B. An N-VDS must be disabled before attaching both Overlay and VLAN transport zones.
- C. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different name/s.
- D. An N-VDS can only attach to a single Overlay transport zone.
正解：A
質問 # 29
Refer to the exhibits.
Design Option1:
Design Option 2:
Design Option 3:
Design Option 4:
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
Critical applications must run across sites without changing IP address.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
RTO/RPO must be reduced for recovery of applications on secondary site.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
- A. Design Option 3
- B. Design Option 4
- C. Design Option 2
- D. Design Option 1
正解：C
質問 # 30
Which two VMware recommendations should an architect follow when configuring top of rack (ToR) switches in an NSX-T Data Center environment? (Choose two.)
- A. Configure switch ports with a Dynamic Trunking Protocol.
- B. Use only IPv4 addressing in all deployments.
- C. Modify the Spanning Tree Protocol to increase the time to transition to the forwarding state.
- D. Configure redundant physical switches to enhance availability.
- E. Configure switch ports that connect to ESXi host manually as trunk ports.
正解：D、E
解説：
Top of Rack Physical Switches
When configuring top of rack (ToR) switches, consider the following best practices:
- Configure redundant physical switches to enhance availability.
- Configure switch ports that connect to ESXi hosts manually as trunk ports. Virtual switches are passive devices and do not support trunking protocols, such as Dynamic Trunking Protocol (DTP).
- Modify the Spanning Tree Protocol (STP) on any port that is connected to an ESXi NIC to reduce the time to transition ports over to the forwarding state, for example using the Trunk PortFast feature found in a Cisco physical switch.
- Provide DHCP or DHCP Helper capabilities on all VLANs used by TEP VMkernel ports. This setup simplifies the configuration by using DHCP to assign IP address based on the IP subnet in use.
- Configure jumbo frames on all switch ports, inter-switch link (ISL), and switched virtual interfaces (SVIs).
https://docs.vmware.com/en/VMware-Validated-Design/5.0.1/vmware-validated-design-501-sddc-nsxt-workload-architecture-design.pdf
質問 # 31
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)
- A. Reduces cost.
- B. Preserves packet locality.
- C. Reduces storage requirements.
- D. Reduces egress data.
- E. Preserves switchports.
正解：A、D
質問 # 32
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
The company will use a Leaf and Spine physical network architecture with Layer 3 gateways for top of rack switches.
The company is planning to deploy 120 ESX hosts across 10 racks.
There will be a total of a 12 clusters where each cluster has one host per rack.
What should the architect recommend to allow applications to run on any host in the cluster? (Choose the best answer.)
- A. Deploy an L2 VPN to allow the networks to extend to each host.
- B. Deploy a Tier-0 gateway per Rack and configure BGP between racks.
- C. Deploy a Tier-1 gateway per Rack and configure BGP between racks.
- D. Deploy all application networks on NSX segments.
正解：C
質問 # 33
Which selection must be taken into consideration when creating a Logical Design for a planned migration?
(Choose the best answer.)
- A. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different name/ s.
- B. An N-VDS can only attach to a single VLAN transport zone.
- C. An N-VDS must be disabled before attaching both Overlay and VLAN transport zones.
- D. An N-VDS can only attach to a single Overlay transport zone.
正解：B
質問 # 34
......
VMware 3V0-42.20 認定試験に備えるために、公式の VMware トレーニングコース、学習ガイド、模擬テストなど、さまざまなリソースを活用することができます。また、NSX-T Data Center ソリューションのハンズオン経験を持つことが推奨され、試験に完全に準備することが重要です。
3V0-42.20試験問題集でPDF問題とテストエンジン：https://www.passtest.jp/VMware/3V0-42.20-shiken.html
最新3V0-42.20試験問題集には合格保証付きます：https://drive.google.com/open?id=1Axpj-J8E6n_LlnYJTjCu_qxumOdSYkxy