[2024年03月]更新のPCEP-30-02試験資料Python Institute学習ガイド
有効な問題最新版を試そうPCEP-30-02テスト解釈PCEP-30-02有効な試験ガイド
質問 # 11
Arrange the code boxes in the correct positions in order to obtain a loop which executes its body with the level variable going through values 5, 1, and 1 (in the same order).
正解：
解説：
質問 # 12
What is the expected output of the following code?
- A. The code raises an unhandled exception.
- B. ('Fermi ', '2021', 'False')
- C. 0
- D. False
正解：B
解説：
Explanation
The code snippet that you have sent is defining and calling a function in Python. The code is as follows:
def runner(brand, model, year): return (brand, model, year)
print(runner("Fermi"))
The code starts with defining a function called "runner" with three parameters: "brand", "model", and "year".
The function returns a tuple with the values of the parameters. A tuple is a data type in Python that can store multiple values in an ordered and immutable way. A tuple is created by using parentheses and separating the values with commas. For example, (1, 2, 3) is a tuple with three values.
Then, the code calls the function "runner" with the value "Fermi" for the "brand" parameter and prints the result. However, the function expects three arguments, but only one is given. This will cause a TypeError exception, which is an error that occurs when a function or operation receives an argument that has the wrong type or number. The code does not handle the exception, and therefore it will terminate with an error message.
However, if the code had handled the exception, or if the function had used default values for the missing parameters, the expected output of the code would be ('Fermi ', '2021', 'False'). This is because the function returns a tuple with the values of the parameters, and the print function displays the tuple to the screen.
Therefore, the correct answer is D. ('Fermi ', '2021', 'False').
質問 # 13
Which of the following functions can be invoked with two arguments?
- A.
- B.
- C.
- D.
正解：B
解説：
Explanation
The code snippets that you have sent are defining four different functions in Python. A function is a block of code that performs a specific task and can be reused in the program. A function can take zero or more arguments, which are values that are passed to the function when it is called. A function can also return a value or None, which is the default return value in Python.
To define a function in Python, you use the def keyword, followed by the name of the function and parentheses. Inside the parentheses, you can specify the names of the parameters that the function will accept.
After the parentheses, you use a colon and then indent the code block that contains the statements of the function. For example:
def function_name(parameter1, parameter2): # statements of the function return value To call a function in Python, you use the name of the function followed by parentheses. Inside the parentheses, you can pass the values for the arguments that the function expects. The number and order of the arguments must match the number and order of the parameters in the function definition, unless you use keyword arguments or default values. For example:
function_name(argument1, argument2)
The code snippets that you have sent are as follows:
A) def my_function(): print("Hello")
B) def my_function(a, b): return a + b
C) def my_function(a, b, c): return a * b * c
D) def my_function(a, b=0): return a - b
The question is asking which of these functions can be invoked with two arguments. This means that the function must have two parameters in its definition, or one parameter with a default value and one without.
The default value is a value that is assigned to a parameter if no argument is given for it when the function is called. For example, in option D, the parameter b has a default value of 0, so the function can be called with one or two arguments.
The only option that meets this criterion is option B. The function in option B has two parameters, a and b, and returns the sum of them. This function can be invoked with two arguments, such as my_function(2, 3), which will return 5.
The other options cannot be invoked with two arguments. Option A has no parameters, so it can only be called with no arguments, such as my_function(), which will print "Hello". Option C has three parameters, a, b, and c, and returns the product of them. This function can only be called with three arguments, such as my_function(2, 3, 4), which will return 24. Option D has one parameter with a default value, b, and one without, a, and returns the difference of them. This function can be called with one or two arguments, such as my_function(2) or my_function(2, 3), which will return 2 or -1, respectively.
Therefore, the correct answer is B. Option B.
質問 # 14
How many hashes (+) does the code output to the screen?
- A. three
- B. five
- C. one
- D. zero (the code outputs nothing)
正解：B
解説：
Explanation
The code snippet that you have sent is a loop that checks if a variable "floor" is less than or equal to 0 and prints a string accordingly. The code is as follows:
floor = 5 while floor > 0: print("+") floor = floor - 1
The code starts with assigning the value 5 to the variable "floor". Then, it enters a while loop that repeats as long as the condition "floor > 0" is true. Inside the loop, the code prints a "+" symbol to the screen, and then subtracts 1 from the value of "floor". The loop ends when "floor" becomes 0 or negative, and the code exits.
The code outputs five "+" symbols to the screen, one for each iteration of the loop. Therefore, the correct answer is C. five.
質問 # 15
What is the expected output of the following code?
- A. 0
- B. 1
- C. 2
- D. The code raises an exception and outputs nothing.
正解：D
解説：
Explanation
The code snippet that you have sent is trying to print the combined length of two lists, "collection" and
"duplicate". The code is as follows:
collection = [] collection.append(1) collection.insert(0, 2) duplicate = collection duplicate.append(3) print(len(collection) + len(duplicate)) The code starts with creating an empty list called "collection" and appending the number 1 to it. The list now contains [1]. Then, the code inserts the number 2 at the beginning of the list. The list now contains [2, 1].
Then, the code creates a new list called "duplicate" and assigns it the value of "collection". However, this does not create a copy of the list, but rather a reference to the same list object. Therefore, any changes made to
"duplicate" will also affect "collection", and vice versa. Then, the code appends the number 3 to "duplicate".
The list now contains [2, 1, 3], and so does "collection". Finally, the code tries to print the sum of the lengths of "collection" and "duplicate". However, this causes an exception, because the len function expects a single argument, not two. The code does not handle the exception, and therefore outputs nothing.
The expected output of the code is nothing, because the code raises an exception and terminates. Therefore, the correct answer is D. The code raises an exception and outputs nothing.
質問 # 16
What happens when the user runs the following code?
- A. The code outputs 3.
- B. The code outputs 2.
- C. The code enters an infinite loop.
- D. The code outputs 1.
正解：B
解説：
Explanation
The code snippet that you have sent is calculating the value of a variable "total" based on the values in the range of 0 to 3. The code is as follows:
total = 0 for i in range(0, 3): if i % 2 == 0: total = total + 1 else: total = total + 2 print(total) The code starts with assigning the value 0 to the variable "total". Then, it enters a for loop that iterates over the values 0, 1, and 2 (the range function excludes the upper bound). Inside the loop, the code checks if the current value of "i" is even or odd using the modulo operator (%). If "i" is even, the code adds 1 to the value of
"total". If "i" is odd, the code adds 2 to the value of "total". The loop ends when "i" reaches 3, and the code prints the final value of "total" to the screen.
The code outputs 2 to the screen, because the value of "total" changes as follows:
When i = 0, total = 0 + 1 = 1
When i = 1, total = 1 + 2 = 3
When i = 2, total = 3 + 1 = 4
When i = 3, the loop ends and total = 4 is printed
Therefore, the correct answer is B. The code outputs 2.
質問 # 17
Assuming that the following assignment has been successfully executed:
Which of the following expressions evaluate to True? (Select two expressions.)
- A. 1.1 in the_list |1:3 |
- B. len (the list [0:2]} <3
- C. the_List.index {"1"} in the_list
- D. the_list. index {'1'} -- 0
正解：B、D
解説：
Explanation
The code snippet that you have sent is assigning a list of four values to a variable called "the_list". The code is as follows:
the_list = ['1', 1, 1, 1]
The code creates a list object that contains the values '1', 1, 1, and 1, and assigns it to the variable "the_list".
The list can be accessed by using the variable name or by using the index of the values. The index starts from
0 for the first value and goes up to the length of the list minus one for the last value. The index can also be negative, in which case it counts from the end of the list. For example, the_list[0] returns '1', and the_list[-1] returns 1.
The expressions that you have given are trying to evaluate some conditions on the list and return a boolean value, either True or False. Some of them are valid, and some of them are invalid and will raise an exception.
An exception is an error that occurs when the code cannot be executed properly. The expressions are as follows:
A). the_List.index {"1"} in the_list: This expression is trying to check if the index of the value '1' in the list is also a value in the list. However, this expression is invalid, because it uses curly brackets instead of parentheses to call the index method. The index method is used to return the first occurrence of a value in a list. For example, the_list.index('1') returns 0, because '1' is the first value in the list. However, the_list.index
{"1"} will raise a SyntaxError exception and output nothing.
B). 1.1 in the_list |1:3 |: This expression is trying to check if the value 1.1 is present in a sublist of the list.
However, this expression is invalid, because it uses a vertical bar instead of a colon to specify the start and end index of the sublist. The sublist is obtained by using the slicing operation, which uses square brackets and a colon to get a part of the list. For example, the_list[1:3] returns [1, 1], which is the sublist of the list from the index 1 to the index 3, excluding the end index. However, the_list |1:3 | will raise a SyntaxError exception and output nothing.
C). len (the list [0:2]} <3: This expression is trying to check if the length of a sublist of the list is less than 3.
This expression is valid, because it uses the len function and the slicing operation correctly. The len function is used to return the number of values in a list or a sublist. For example, len(the_list) returns 4, because the list has four values. The slicing operation is used to get a part of the list by using square brackets and a colon. For example, the_list[0:2] returns ['1', 1], which is the sublist of the list from the index 0 to the index 2, excluding the end index. The expression len (the list [0:2]} <3 returns True, because the length of the sublist ['1', 1] is 2, which is less than 3.
D). the_list. index {'1'} - 0: This expression is trying to check if the index of the value '1' in the list is equal to 0. This expression is valid, because it uses the index method and the equality operator correctly. The index method is used to return the first occurrence of a value in a list. For example, the_list.index('1') returns 0, because '1' is the first value in the list. The equality operator is used to compare two values and return True if they are equal, or False if they are not. For example, 0 == 0 returns True, and 0 == 1 returns False. The expression the_list. index {'1'} - 0 returns True, because the index of '1' in the list is 0, and 0 is equal to 0.
Therefore, the correct answers are C. len (the list [0:2]} <3 and D. the_list. index {'1'} - 0.
質問 # 18
Assuming that the following assignment has been successfully executed:
My_list - [1, 1, 2, 3]
Select the expressions which will not raise any exception.
(Select two expressions.)
- A. my_List- [0:1]
- B. my list [6]
- C. my_list[-10]
- D. my_list|my_Li1st | 3| I
正解：A、D
解説：
Explanation
The code snippet that you have sent is assigning a list of four numbers to a variable called "my_list". The code is as follows:
my_list = [1, 1, 2, 3]
The code creates a list object that contains the elements 1, 1, 2, and 3, and assigns it to the variable "my_list".
The list can be accessed by using the variable name or by using the index of the elements. The index starts from 0 for the first element and goes up to the length of the list minus one for the last element. The index can also be negative, in which case it counts from the end of the list. For example, my_list[0] returns 1, and my_list[-1] returns 3.
The code also allows some operations on the list, such as slicing, concatenation, repetition, and membership.
Slicing is used to get a sublist of the original list by specifying the start and end index. For example, my_list[1:3] returns [1, 2]. Concatenation is used to join two lists together by using the + operator. For example, my_list + [4, 5] returns [1, 1, 2, 3, 4, 5]. Repetition is used to create a new list by repeating the original list a number of times by using the * operator. For example, my_list * 2 returns [1, 1, 2, 3, 1, 1, 2, 3].
Membership is used to check if an element is present in the list by using the in operator. For example, 2 in my_list returns True, and 4 in my_list returns False.
The expressions that you have given are trying to access or manipulate the list in different ways. Some of them are valid, and some of them are invalid and will raise an exception. An exception is an error that occurs when the code cannot be executed properly. The expressions are as follows:
A). my_list[-10]: This expression is trying to access the element at the index -10 of the list. However, the list only has four elements, so the index -10 is out of range. This will raise an IndexError exception and output nothing.
B). my_list|my_Li1st | 3| I: This expression is trying to perform a bitwise OR operation on the list and some other operands. The bitwise OR operation is used to compare the binary representation of two numbers and return a new number that has a 1 in each bit position where either number has a 1. For example, 3 | 1 returns 3, because 3 in binary is 11 and 1 in binary is 01, and 11 | 01 is 11. However, the bitwise OR operation cannot be applied to a list, because a list is not a number. This will raise a TypeError exception and output nothing.
C). my list [6]: This expression is trying to access the element at the index 6 of the list. However, the list only has four elements, so the index 6 is out of range. This will raise an IndexError exception and output nothing.
D). my_List- [0:1]: This expression is trying to perform a subtraction operation on the list and a sublist. The subtraction operation is used to subtract one number from another and return the difference. For example, 3 - 1 returns 2. However, the subtraction operation cannot be applied to a list, because a list is not a number. This will raise a TypeError exception and output nothing.
Only two expressions will not raise any exception. They are:
B). my_list|my_Li1st | 3| I: This expression is not a valid Python code, but it is not an expression that tries to access or manipulate the list. It is just a string of characters that has no meaning. Therefore, it will not raise any exception, but it will also not output anything.
D). my_List- [0:1]: This expression is a valid Python code that uses the slicing operation to get a sublist of the list. The slicing operation does not raise any exception, even if the start or end index is out of range. It will just return an empty list or the closest possible sublist. For example, my_list[0:10] returns [1, 1, 2, 3], and my_list[10:20] returns []. The expression my_List- [0:1] returns the sublist of the list from the index 0 to the index 1, excluding the end index. Therefore, it returns [1]. This expression will not raise any exception, and it will output [1].
Therefore, the correct answers are B. my_list|my_Li1st | 3| I and D. my_List- [0:1].
質問 # 19
Assuming that the phonc_dir dictionary contains namemumber pairs, arrange the code boxes to create a valid line of code which retrieves Martin Eden's phone number, and assigns it to the number variable.
正解：
解説：
Explanation
number = phone_dir["Martin Eden"]
This code uses the square brackets notation to access the value associated with the key "Martin Eden" in the phone_dir dictionary. The value is then assigned to the variable number. A dictionary is a data structure that stores key-value pairs, where each key is unique and can be used to retrieve its corresponding value. You can find more information about dictionaries in Python in the following references:
[Python Dictionaries - W3Schools]
[Python Dictionary (With Examples) - Programiz]
[5.5. Dictionaries - How to Think Like a Computer Scientist ...]
質問 # 20
What is the expected result of the following code?
- A. 0
- B. 1
- C. 2
- D. The code will cause an unhandled
正解：D
解説：
Explanation
The code snippet that you have sent is trying to use a list comprehension to create a new list from an existing list. The code is as follows:
my_list = [1, 2, 3, 4, 5] new_list = [x for x in my_list if x > 5]
The code starts with creating a list called "my_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it tries to create a new list called "new_list" by using a list comprehension. A list comprehension is a concise way of creating a new list from an existing list by applying some expression or condition to each element. The syntax of a list comprehension is:
new_list = [expression for element in old_list if condition]
The expression is the value that will be added to the new list, which can be the same as the element or a modified version of it. The element is the variable that takes each value from the old list. The condition is an optional filter that determines which elements will be included in the new list. For example, the following list comprehension creates a new list that contains the squares of the even numbers from the old list:
old_list = [1, 2, 3, 4, 5, 6] new_list = [x ** 2 for x in old_list if x % 2 == 0] new_list = [4, 16, 36]The code that you have sent is trying to create a new list that contains the elements from the old list that are greater than 5. However, there is a problem with this code. The problem is that none of the elements in the old list are greater than 5, so the condition is always false. This means that the new list will be empty, and the expression will never be evaluated. However, the expression is not valid, because it uses the variable x without defining it. This will cause a NameError exception, which is an error that occurs when a variable name is not found in the current scope. The code does not handle the exception, and therefore it will terminate with an error message.
The expected result of the code is an unhandled exception, because the code tries to use an undefined variable in an expression that is never executed. Therefore, the correct answer is D. The code will cause an unhandled exception.
質問 # 21
Insert the code boxes in the correct positions in order to build a line of code which asks the user for an integer value and assigns it to the depth variable.
(Note: some code boxes will not be used.)
正解：
解説：
Explanation
One possible way to insert the code boxes in the correct positions in order to build a line of code which asks the user for an integer value and assigns it to the depth variable is:
depth = int(input("Enter the immersion depth: "))
This line of code uses the input function to prompt the user for a string value, and then uses the int function to convert that string value into an integer number. The result is then assigned to the variable depth.
You can find more information about the input and int functions in Python in the following references:
[Python input() Function]
[Python int() Function]
質問 # 22
What is the expected output of the following code?
- A. The code is erroneous and cannot be run.
- B. 0
- C. pizzapastafolpetti
- D. ppt
正解：D
解説：
Explanation
The code snippet that you have sent is using the slicing operation to get parts of a string and concatenate them together. The code is as follows:
pizza = "pizza" pasta = "pasta" folpetti = "folpetti" print(pizza[0] + pasta[0] + folpetti[0]) The code starts with assigning the strings "pizza", "pasta", and "folpetti" to the variables pizza, pasta, and folpetti respectively. Then, it uses the print function to display the result of concatenating the first characters of each string. The first character of a string can be accessed by using the index 0 inside square brackets. For example, pizza[0] returns "p". The concatenation operation is used to join two or more strings together by using the + operator. For example, "a" + "b" returns "ab". The code prints the result of pizza[0] + pasta[0] + folpetti[0], which is "p" + "p" + "f", which is "ppt".
The expected output of the code is ppt, because the code prints the first characters of each string. Therefore, the correct answer is B. ppt.
質問 # 23
......
PCEP-30-02試験問題と解答：https://www.passtest.jp/Python-Institute/PCEP-30-02-shiken.html
PCEP-30-02実際の問題解答PDFは100%カバー率でリアル試験問題：https://drive.google.com/open?id=1iqv9Fq5fglicYVGYXP_qcWe56KU71TVx