[2024年05月] 無料お試しOracle 1z0-996-22問題集PDFは必ずベストの問題集オプションを使おう
1z0-996-22試験資料Oracle学習ガイド
Oracle 1z0-996-22 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 # 27
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributesof a measuring component?
- A. Channel ID and Badge Number
- B. Model and Serial Number
- C. Serial Number and Badge Number
- D. Manufacturer and Model
- E. Channel Multiplier and Channel ID
正解：E
解説：
measuring component is a single point for which data will be received and stored in the system. A measuring component can be associated to a device, which can have one or more measuring components, or it can be
"virtual" or "stand-alone," meaning that it is not associated to a device. A measuring component can have various attributes that define its characteristics, such as the measuring component type, the device configuration, the VEE groups, and the scalar or interval class. Two of the attributes that are specific to a measuring component are:
Channel Multiplier: A channel multiplier is a value that is used to adjust the measurement data received from the device to the correct units of measure. For example, if the device measures consumption in cubic feet, but the system stores it in cubic meters, the channel multiplier is used to convert the units.
Channel ID: A channel ID is a unique identifier that is assigned to a measuring component by the device or the head end system. It is used to match the measurement data received from the device to the corresponding measuring component in the system.
The other options are not correct attributes of a measuring component, because:
Channel ID and Badge Number: A badge number is an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer or the utility. It is used to track the device's history and location.
Serial Number and Badge Number: A serial number is also an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer. It is used to identify the device's model and specifications.
Model and Serial Number: A model and a serial number are both attributes of a device, not a measuring component. They are used to identify the device's manufacturer and specifications.
Manufacturer and Model: A manufacturer and a model are also attributes of a device, not a measuring component. They are used to identify the device's brand and type.
References:
About Measuring Components
Measuring Components
質問 # 28
For a customer to receive a Subscription communication, what must they have?
- A. an active address type preference
- B. an active person contact preference
- C. an active account contact preference
- D. an active address contact preference
正解：C
質問 # 29
What determines an Account's Balance?
- A. the amount recorded in the "Balance Due" field on an account
- B. the sum of all the Financial Transactions linked directly to theservice agreements related to the account
- C. the sum of all the Financial Transactions linked directly to the account
- D. the sum of all the balances recorded in the "Balance Due" field on each serviceagreement related to the account
- E. the logic defined in a plug-in spot on the Installations Option
正解：C
解説：
An account's balance is the total amount of money that the account owes or is owed by the utility1. An account's balance is determined by the sum of all the financial transactions linked directly to the account2. Financial transactions are records of monetary events that affect an account, such as charges, payments, adjustments, or refunds3. Financial transactions can be linked to an account directly or indirectly through a service agreement. However, only the financial transactions that are linked directly to the account are used to calculate the account's balance2. Therefore, the correct answer is E. the sum of all the Financial Transactions linked directly to the account. References:
About Accounts
About Account Balances
About Financial Transactions
[Understanding Financial Transaction Linkage]
質問 # 30
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Customer Device Compatibility Check
- B. Check for Measurement
- C. Create Usage Subscription
- D. Start Service Agreement
- E. Create Service Point
正解：A、B
解説：
The "Are SP and Device Ready?" state algorithms are used to check the readiness of the service point and the device for enabling service. The base package provides two algorithms for this purpose: Customer Device Compatibility Check and Check for Measurement. The Customer Device Compatibility Check algorithm validates that the device installed at the service point is compatible with the customer class and the service agreement type. The Check for Measurement algorithm verifies that the device has a valid measurement associated with it. If either of these algorithms returns false, the service order will be put on hold until the issue is resolved. References: Oracle Utilities Customer Cloud Service Service Order Configuration Guide, Oracle Utilities Customer Cloud Service Service Order User Guide, Oracle Utilities Customer Cloud Service Algorithms Configuration Guide
質問 # 31
On which three entities can proration be disabled? (Choose three.)
- A. Rate Schedule
- B. Bill Factor
- C. Calculation Rule Business Object
- D. Rate Version Calculation Group
- E. Calculation Rule
正解：A、C、D
質問 # 32
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Multiplier Check Validation
- B. High/Low Check Validation
- C. Critical Validation
- D. Sum Check Validation
- E. Critical Validation, High/Low Check Validation, and Sum Check Validation
正解：A
質問 # 33
How many derived values can a final measurement have in addition to the primary measured value?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
解説：
A final measurement is a measurement that has been validated, edited, and estimated by the Oracle Utilities Customer Cloud Service. A final measurement can record up to 10 derived values in addition to the primary measured value. The derivation formula for each value on a final measurement is controlled by the measuring component type. Derived values are not reliant on consumption values, but can also come from factors, historical data, or another source1. References: About Final Measurements, Oracle Utilities Customer Cloud Service - Get Started, Oracle Utilities Customer Cloud Service 22A What's New
質問 # 34
Which three statements are correct for Adjustment Types? (Choose three.)
- A. They control the valid Service Agreement Types that adjustments can be linked to.
- B. They can default an Adjustment Amount to adjustments.
- C. They control how adjustments appear on bills.
- D. They control the valid Adjustment Profiles that adjustment types can belong to.
- E. They control whether a rate is to be called to calculate an adjustment amount.
正解：B、C、E
解説：
Adjustment Types in the Oracle Utilities Customer Cloud Service play a significant role in managing financial transactions, particularly adjustments. Here's a breakdown of the correct statements:
They can default an Adjustment Amount to adjustments (Option A): Adjustment Types can have predefined adjustment amounts. When an adjustment type is selected, the predefined amount can automatically be set as the adjustment amount.
They control how adjustments appear on bills (Option B): The appearance of adjustments on bills, including how they are described and categorized, is governed by the Adjustment Types. This includes the presentation and grouping of these adjustments in the billing statements.
They control whether a rate is to be called to calculate an adjustment amount (Option C): Adjustment Types can determine whether a specific rate needs to be invoked for the calculation of the adjustment amount. This aspect is crucial when the adjustment amount depends on particular rate calculations.
Options D and E, pertaining to the control over Service Agreement Types and Adjustment Profiles, are not directly controlled by Adjustment Types. Instead, these aspects are managed by different configurations within the Oracle Utilities Customer Cloud Service.
References:
Oracle documentation on Designing And Defining Adjustment Types: Designing And Defining Adjustment Types.
Oracle documentation on Setting Up Adjustment Types: Setting Up Adjustment Types.
Oracle documentation on Adjustment Types: Adjustment Types.
質問 # 35
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. Factor Override
- B. VEE rule
- C. Usage Rule
- D. TOU map
正解：A、C、D
質問 # 36
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Bill Factor Characteristic
- B. Bill Factor Value
- C. Service Agreement - Contract Value
- D. Account Characteristic
- E. Calculation Rule
正解：C
質問 # 37
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?
- A. Payment Type + Debt Age
- B. Service Agreement Type's Priority and Debt Age
- C. Debt Age
- D. Customer Class and Service Agreement Type
- E. Customer Class and Debt Age
正解：E
質問 # 38
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specificactivity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Device
- B. Device Configuration
- C. Smart Meter Command
- D. Service Point
正解：C
解説：
The algorithm D1-CNSPINSDV (Connect SP and/or Install Device) is used to create a device and/or a device configuration when a service point is connected or disconnected. The algorithm checks the status of the service point and the device configuration type to determine if a device or a device configuration needs to be created.
For example, if the service point is connected and the device configuration type is Install, the algorithm will create a device and a device configuration. If the service point is disconnected and the device configuration type is Remove, the algorithm will create a device configuration only. References: Oracle Utilities Customer Cloud Service Service Order Configuration Guide, Oracle Utilities Customer Cloud Service Service Order User Guide, Oracle Utilities Customer Cloud Service Algorithms Configuration Guide
質問 # 39
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Usage Type
- B. Device Type and Measuring Component Type
- C. Measuring Component Type
- D. Device Configuration Type
- E. Device Type
正解：C
質問 # 40
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine theactions for?
- A. Connect the Service Point; Install a Device; Create a Usage Subscription
- B. Create a Service Point; Install a Device; Turn on the Device
- C. Connect the Service Point;Install a Device; Turn on the Device
- D. Create a Device Configuration; Install a Device; Turn on the Device
正解：C
解説：
The Enable Service Orchestrator is a service order orchestrator that determines the steps required to complete the service of enabling service for a customer. The Enable Service Orchestrator uses the state of the service point and the device to decide what actions need to be performed. For example, if the service point is disconnected and the device is not installed, the Enable Service Orchestrator will determine that the following actions are needed: Connect the Service Point; Install a Device; Turn on the Device. These actions will be executed by the corresponding service order activities, such as Connect SP, Install Device, and Turn On Device. References: Oracle Utilities Customer Cloud Service Service Order Configuration Guide, Oracle Utilities Customer Cloud Service Service Order User Guide, Oracle Utilities Customer Cloud Service Service Order Orchestrator Configuration Guide
質問 # 41
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will haveto be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. billing usage rules
- B. the device's date of manufacturer
- C. valid head-end systems, valid device configuration types, and the electricity service type
- D. the model number
正解：C
解説：
Device types define information about a class of devices, including properties that apply to all devices of a type1. For the AMI roll-out, the device type administrative data should consider the following aspects:
Valid head-end systems: A head-end system is a system that communicates with devices and collects measurement and event data from them2. The device type should specify a fallback head-end system and a list of valid head-end systems that can be used for the devices of that type1. This will allow the customer to choose the head-end system that best suits their needs and preferences.
Valid device configuration types: A device configuration type defines the configuration parameters and commands that can be applied to a device of a certain type3. The device type should specify the valid list of device configuration types that can be used for the devices of that type1. This will ensure that the devices are configured consistently and correctly to support the existing tariffs for billing.
Electricity service type: A service type defines the characteristics of a service that is provided to a customer, such as the commodity, the rate schedule, the bill cycle, etc4. The device type should specify the electricity service type that is associated with the devices of that type1. This will enable the system to calculate the usage and billing for the devices based on the service type. References:
1: Understanding Device Types
2: Head End Systems
3: Device Configuration Types
4: Service Types
質問 # 42
Which entity defines the type of collection process to start based on ageof debt, amount of debt, and type of customer?
- A. Collection Class Control
- B. Customer Class
- C. Debt Class
- D. Collection Process Template
- E. Collection Class
正解：A
解説：
Collection Class Control is the entity that defines the type of collection process to start based on the age of debt, amount of debt, and type of customer. Collection Class Control is a set of rules that determines which collection class (i.e., the collection process template) to assign to a service agreement based on its debt characteristics and customer class1. Collection Class Control also defines the frequency and timing of the collection process assignment and the criteria for canceling a collection process1. Collection Class Control is associated with a debt class, which is a category of debt that defines how it is calculated, aged, and collected2.
Collection Class Control allows you to create different collection strategies for different types of debt and customers. References: Collection Class Control, Debt Class, Oracle Utilities Customer Cloud Service - Get Started
質問 # 43
How many Tenders can a Payment Event have?
- A. no Tenders for Payment Events, only Payments
- B. one Tender per Payment Event
- C. one Tender for each form of Payment submitted
- D. one Tender for each account the payment is applied to
- E. no Tenders for Payment Events, only Payment Segments
正解：C
質問 # 44
What can cause a bill segment to have multiple bill calculation headers?
- A. multiple Rate Version Calculation Group
- B. multiple service agreements being covered by a bill segment
- C. proration at Bill Factor level
- D. proration at Calculation Rules level
- E. multiple Scheduled Read Dates covered by the bill period
正解：C
質問 # 45
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- B. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
- C. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
- D. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
正解：A
質問 # 46
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - B. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage - D. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements
正解：A
解説：
The high-level process from loading measurements through calculating usage is as follows1:
Load Initial Measurements: This step involves loading the raw measurement data from the head-end systems or other sources into the Initial Measurement Data (IMD) table. The IMD can be of scalar or interval type, and can have different statuses, such as new, processed, or rejected2.
Validate, edit, and estimate Initial Measurements: This step involves applying the Validation, Estimation, and Editing (VEE) rules to the IMD to check for data quality, completeness, and accuracy. The VEE rules can perform various actions, such as validating the IMD against predefined criteria, editing the IMD values based on business logic, estimating the missing or invalid IMD values based on historical or statistical methods, or generating exceptions for the IMD that require manual intervention3.
Create Final Measurements: This step involves creating the Final Measurement Data (FMD) from the IMD that have passed the VEE rules. The FMD are the processed and validated measurement data that are used for further processing, such as usage calculation, billing, reporting, or analysis. The FMD can also have derived values that are calculated from the FMD values using derivation formulas.
Calculate Usage: This step involves calculating the usage transactions from the FMD using the usage calculation rules. The usage calculation rules define how to calculate the service quantity and price for a usage transaction based on the usage subscription, the rate schedule, the measuring components, and other parameters. The usage transactions are the output of the usage calculation process that are used for billing or other purposes. References:
1: Overview of Usage Calculation
2: About Initial Measurements
3: About Validation, Estimation, and Editing
4: About Final Measurements
5: About Usage Transactions
質問 # 47
Which two statements about usage subscription types are correct? (Choose two.)
- A. Usage subscription types define the main billing contact.
- B. Usage subscription types define the time zone.
- C. Usage subscription types define the recipient of the usage.
- D. Usage subscription types define the valid service point types.
正解：C、D
解説：
Usage subscription types are used to define the types of usage that can be stored for a service point, such as consumption, demand, or generation. Usage subscription types have the following attributes:
Valid Usage Recipients: A list of usage recipients for which this usage subscription type is applicable. A usage recipient is an entity that receives usage from a service point, such as a customer, a utility, or a third party.
Valid Service Point Types: A list of service point types for which this usage subscription type is applicable. A service point type is a classification of service points based on their characteristics, such as metered, unmetered, or virtual.
Valid Usage Calculation Groups: A list of usage calculation groups for which this usage subscription type is applicable. A usage calculation group is a collection of usage calculation types that define how usage is calculated, such as interval, register, or profile.
Valid Dynamic Option Types: A list of dynamic option types for which this usage subscription type is applicable. A dynamic option type is a type of option that can be used to modify the usage calculation process, such as estimation, editing, or aggregation.
Therefore, usage subscription types define the valid service point types and the recipient of the usage, but not the main billing contact or the time zone. References:
Usage Subscription Types
Understanding Usage Subscription Types
Configuring Usage Subscription Types
質問 # 48
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- C. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- D. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
- E. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
正解：B
質問 # 49
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. The original installation event is updated with the "removal" (expire old device configuration).
- B. A new installation event is created to "install" (new device configuration).
- C. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
- D. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
- E. A device with a new configuration type is created.
正解：D
質問 # 50
Which statement correctly describes the relation between a device and a measuring component?
- A. A device should have only one measuring component type.
- B. Two measuring components on the same device should have the same Units of Measure (UOM).
- C. A device configuration links a device only to interval channels.
- D. A device can have any combination of interval and/or scalar measuring components.
正解：D
解説：
A device is a physical or logical entity that can measure, control, or monitor something1. A measuring component is a single point for which data will be received and stored in the system2. A device can have one or more measuring components, or none at all2. Measuring components can be classified into two primary classes: scalar and interval2. Scalar measuring components are measured at unpredictable intervals, such as once a month2. Interval measuring components are measured at predictable intervals, such as every 15 minutes, every 30 minutes, every hour, etc2. A device can have any combination of interval and/or scalar measuring components, depending on the device type, device configuration, and measuring component type23. Therefore, the correct answer is D. A device can have any combination of interval and/or scalar measuring components. References:
About Devices
About Measuring Components
Maintaining Measuring Components
質問 # 51
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control how the current balance is affected.
- B. They control if and how the General Ledger entries are created.
- C. They control how the payoff balance is affected.
- D. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- E. They control when a Financial Transaction is to be swept onto a bill.
正解：B、C、E
質問 # 52
......
Oracle 1z0-996-22試験は、Oracle Utilities Customer Cloud Service 2022を実装するスキルと知識を検証することを目的としたプロフェッショナル向けのものです。この認定試験は、組織のためにOracle Utilities Customer Cloud Serviceソリューションを展開および構成する責任を持つ個人を対象としています。
有効な問題最新版を試そう1z0-996-22テスト解釈1z0-996-22有効な試験ガイド：https://www.passtest.jp/Oracle/1z0-996-22-shiken.html
1z0-996-22実際の問題解答PDFは100%カバー率でリアル試験問題：https://drive.google.com/open?id=1YlwQIAxBlW2TewRNNg-BYp3Xy8zGo_ms