• ホーム
  • ブログ
  • [2024年12月27日] 最新更新されたのは2V0-33.22PSE試験問題2024年更新 [Q26-Q46]

[2024年12月27日] 最新更新されたのは2V0-33.22PSE試験問題2024年更新 [Q26-Q46]

Share

[2024年12月27日] 最新更新されたのは2V0-33.22PSE試験問題2024年更新

無料更新されたVMware 2V0-33.22PSEテストエンジン問題には128問題と解答

質問 # 26
Which statement describes the VMware Multi-Cloud vision?

  • A. Flexibility to choose any hypervisor
  • B. Flexibility to choose any hardware vendor
  • C. Flexibility to operate globally and consistently
  • D. Flexibility to manage infrastructure through outsourcing

正解：C

解説：
https://www.vmware.com/cloud-solutions/multi-cloud.html
Multi-Cloud Solutions Redefine the foundation of IT to power every application on any cloud. With Multi-Cloud solutions from VMware, you can migrate to the cloud without recoding your apps, modernize your infrastructure, and operate consistently across the data center, the edge, and any cloud.


質問 # 27
If a company connects their data center to a VMware Cloud on AWS software-defined data center (SDDC) Instance through a virtual private network (VPN) and advertises a 0.0.0.0/0 route, what Is the expected behavior of the SDDC compute network traffic?

  • A. All compute network traffic destined for the data center will egress through the VPN but all Internet traffic will egress through the cloud provider Internet gateway.
  • B. All compute and management traffic will egress to the data center.
  • C. All compute network traffic will egress to the data center.
  • D. All compute network traffic will egress through the cloud provider Internet gateway.

正解：C

解説：
When a VPN is established between the data center and the SDDC Instance, it allows the organization to create a private and secure connection between their on-premises infrastructure and their workloads running in the cloud. By advertising a 0.0.0.0/0 route, the organization is essentially routing all traffic to the VPN tunnel, which means that all traffic including traffic destined for the data center and internet traffic, will be sent through the VPN tunnel to the company's data center.
It is important to note that this configuration depends on the company's network architecture and security policies, and that there may be other alternatives that better fit the organization's needs.


質問 # 28
What are two incident management services included in the VMware Cloud on AWS service management process? (Choose two)

  • A. Incident Management
  • B. VMware Tools management
  • C. Microsoft License management
  • D. Capacity management
  • E. Workload OS management

正解：A、D

解説：
The two incident management services included in the VMware Cloud on AWS Service Management process are Incident Management and Capacity Management.
Incident Management is responsible for detecting, classifying, and resolving incidents quickly and effectively. It includes monitoring and alerting, incident response, and problem management. Capacity Management is responsible for predicting, measuring, and managing the capacity of the infrastructure. It includes capacity planning, performance analysis, and resource optimization.


質問 # 29
Which out-of-the-box role is required in order to create a content library In VMware Cloud on AWS?

  • A. CloudAdmin
  • B. Active Directory ESXi Admin
  • C. Ad mlnistrator@vSphere. local
  • D. CloudGlobalAdmln

正解：A

解説：
The CloudAdmin role has the privileges necessary to create and manage SDDC workloads and related objects such as storage policies, content libraries, vSphere tags, and resource pools The CloudAdmin role has the following privileges in SDDC Version 1.18.
ContentLibrary.AddCertToTrustStore
ContentLibrary.AddLibraryItem
ContentLibrary.CheckInTemplate
ContentLibrary.CheckOutTemplate
ContentLibrary.CreateLocalLibrary
ContentLibrary.CreateSubscribedLibrary
ContentLibrary.DeleteCertFromTrustStore
ContentLibrary.DeleteLibraryItem
ContentLibrary.DeleteLocalLibrary
ContentLibrary.DeleteSubscribedLibrary
ContentLibrary.DownloadSession
ContentLibrary.EvictLibraryItem
ContentLibrary.EvictSubscribedLibrary
ContentLibrary.GetConfiguration
ContentLibrary.ImportStorage
ContentLibrary.ProbeSubscription
ContentLibrary.ReadStorage
ContentLibrary.SyncLibrary
ContentLibrary.SyncLibraryItem
ContentLibrary.TypeIntrospection
ContentLibrary.UpdateConfiguration
ContentLibrary.UpdateLibrary
ContentLibrary.UpdateLibraryItem
ContentLibrary.UpdateLocalLibrary
ContentLibrary.UpdateSession
ContentLibrary.UpdateSubscribedLibrary
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-DFB3C048-5728-4DE9-9380-7240748875C3.html


質問 # 30
A cloud administrator is In the process of troubleshooting a non-compliant object. How can the administrator change a VM storage policy for an ISO image?

  • A. Attach the ISO Image to a virtual machine.
  • B. Modify the default VM storage policy.
  • C. Apply a new VM storage policy.
  • D. Modify the default VM storage policy and recreate the ISO image.

正解：C

解説：
To address a non-compliant object, such as an ISO image, a cloud administrator can apply a new VM storage policy directly to that object. This doesn't require modifying the default VM storage policy or recreating the ISO image. Applying a new policy to the ISO allows for specific storage requirements to be met without affecting other objects or the default settings.


質問 # 31
As per company policy, all administrator level accounts need to have their password changed on a regular basis. The [email protected] account password is changed by an administrator from the vSphere Client.
Another administrator is using the credentials in the VMware Cloud console and gets an 'access denied' error.
What could be the problem?

  • A. The password should only be changed through the VMware Cloud console.
  • B. The password change email confirmation has NOT been approved by the organization owner.
  • C. The password should be changed by escalation of privileges.
  • D. The new password is NOT synchronized with the password that is displayed for the Default vCenter user account.

正解：D

解説：
The problem could be that the new password is not synchronized with the password that is displayed for the Default vCenter user account. The administrator must make sure that the same password is used in both the vSphere Client and the VMware Cloud console in order for the user to access the account. Changing the password in one place does not automatically change it in the other, so this must be done manually.
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-7F72EA90-5BFA-404F-A2EC-B93070A52A67.html


質問 # 32
Which two steps should an administrator take to allow HTTPS access to a specific virtual machine (VM) through the public Internet for VMware Cloud on AWS? (Choose two.)

  • A. Configure a DNAT rule translating a public IP address to an internal IP address.
  • B. Request a public IP address in the VMware Cloud console.
  • C. Configure AWS Direct Connect.
  • D. Create a custom service called HTTPS using port 443.
  • E. Configure a SNAT rule translating an internal IP address to a public IP address.

正解：A、B

解説：
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-0E34C56D-C49C-49B6-A9CF-FBFAF14A126C.html To allow HTTPS access to a specific VM through the public Internet for VMware Cloud on AWS, the administrator should take the following two steps:
Request a public IP address in the VMware Cloud console. This is required because the VM needs a public IP address to be reachable from the Internet1. The administrator can request a public IP address from the Networking & Security tab in the VMware Cloud console1. The public IP address is allocated from the AWS pool and is associated with the SDDC1.
Configure a DNAT rule translating a public IP address to an internal IP address. This is required because the VM has an internal IP address assigned by the SDDC DHCP server, and the DNAT rule maps the public IP address to the internal IP address of the VM2. The administrator can configure a DNAT rule from the Networking & Security tab in the VMware Cloud console2. The DNAT rule must specify the public IP address as the source, the internal IP address as the destination, and the HTTPS service (TCP 443) as the applied to2. Reference: 1: Request a Public IP Address - VMware Docs, 2: Configure NAT Rules - VMware Docs


質問 # 33
Which statements accurately describe gateway firewalls and distributed firewalls? (Select two options)

  • A. A gateway firewall protects north-south traffic.
  • B. Only gateway firewalls use stateful rules.
  • C. A distributed firewall controls the I/O path to and from a VM's virtual NIC.
  • D. Gateway firewalls and distributed firewalls can share the same sets of rules and policies.

正解：A、B

解説：
Gateway firewalls are used to protect east-west traffic, while distributed firewalls control the I/O path to and from a VM's virtual NIC. Furthermore, gateway firewalls and distributed firewalls cannot share the same sets of rules and policies.


質問 # 34
A cloud administrator needs to create a virtual machine that requires layer 2 connectivity to an on-premises workload. Which type of network segment Is required?

  • A. Existing
  • B. Outbound
  • C. Extended
  • D. Routed

正解：C

解説：
An extended network segment is required for a cloud administrator to create a virtual machine that requires layer 2 connectivity to an on-premises workload. Extended networks allow for the virtual machines to communicate directly with the on-premises workload while remaining isolated from the public cloud. This allows for the virtual machines to access the same services and workloads as the on-premises workloads while still remaining secure.


質問 # 35
A cloud administrator is tasked with moving critical business workloads between two VMware Cloud on AWS software-defined data centers (SDDCs) located in different geographical regions. The following requirements must be met:
* Migrate 300 virtual machines from region A to region B with minimal downtime of the applications.
* Non-disruptively resume application access of the targeted virtual machines in the event the migration fails.
* Support concurrent switch over of the application workloads to occur during a pre-defined maintenance window.
Which VMware HCX migration type should be used to meet these requirements?

  • A. VMware HCX vMotion
  • B. VMware HCX Bulk Migration
  • C. VMware HCX Replication Assisted vMotion
  • D. VMware HCX Cold Migration

正解：C

解説：
https://docs.vmware.com/en/VMware-HCX/4.5/hcx-user-guide/GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0.html
"VMware HCX Replication Assisted vMotion (RAV) uses the HCX Interconnect appliance along with replication and vMotion technologies to provide large scale, parallel migrations with zero downtime." Understanding VMware HCX Replication Assisted vMotion: https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0.html#GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0


質問 # 36
Which two components are required in order to deploy a Tanzu Kubernetes Grid Cluster in VMware Could environment? (Choose two)

  • A. Supervisor namespace
  • B. Tanzu CLI
  • C. vSphere VM folder
  • D. vSphere resource pool
  • E. YAML manifest file

正解：C、D

解説：
https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid/1.6/air-gap-reference-architecture/GUID-deployment-guides-tkg-vsphere-vds-airgap.html


質問 # 37
A cloud administrator is asked to validate a proposed internetworking design that will provide connectivity to a VMware Cloud on AWS environment from multiple company locations.
The following requirements must be met:
* Connectivity to the VMware Cloud on AWS environment must support high-throughput data transfer.
* Connectivity to the VMware Cloud on AWS environment must NOT have a single point of failure.
* Any network traffic between on-premises company locations must be sent over a private IP address space.
Which design decisions should be made to meet these network connectivity requirements?

  • A. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
    * Use a public VIF for this connection.
    * Configure a route-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS.
    * Configure dual, redundant, route-based IPsec VPN connections from each regional office to VMware Cloud on AWS.
  • B. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
    * Use a private VIF for this connection.
    * Configure a route-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS, taking care to enable the "Use VPN as Backup to Direct Connect" option.
    * Configure dual, redundant, route-based IPsec VPN connections from each regional office to VMware Cloud on AWS.
  • C. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
    * Use a private VIF for this connection.
    * Configure a policy-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS, taking care to enable the "Use VPN as Backup to Direct Connect" option.
    * Configure dual, redundant, policy-based IPsec VPN connections from each regional office to VMware Cloud on AWS.
  • D. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
    * Use a private VIF for this connection.
    * Configure a secondary, standby Direct Connect from headquarters using a public VIF.
    * Configure dual, redundant, policy-based IPsec VPN connections from each regional office to VMware Cloud on AWS.

正解：B

解説：
Option C is the best design decision that meets the network connectivity requirements. Configuring a Direct Connect from headquarters to VMware Cloud on AWS with a private VIF will ensure high-throughput data transfer and eliminate the single point of failure. To ensure that all network traffic between on-premises company locations is sent over a private IP address space, a route-based IPsec VPN tunnel should be configured as a secondary method of connectivity from headquarters to VMware Cloud on AWS, taking care to enable the "Use VPN as Backup to Direct Connect" option. Finally, dual, redundant, route-based IPsec VPN connections should be configured from each regional office to VMware Cloud on AWS.
A route-based VPN creates an IPsec tunnel interface and routes traffic through it as dictated by the SDDC routing table. A route-based VPN provides resilient, secure access to multiple subnets. When you use a route-based VPN, new routes are added automatically when new networks are created. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-5AF45CE6-FA53-45C0-83E5-25F8E3A055E9.html


質問 # 38
A cloud administrator is looking to migrate several dozen workloads from their on-premises location to a VMware public cloud using the vMotlon feature of VMware HCX. A total of three networks will need to be stretched for the migration. They will also be utilizing the capabilities of the WAN appliance to optimize migration traffic.
Based on this scenario, how many IP addresses would need to be reserved for the on-premises deployment of VMware HCX?

  • A. five
  • B. three
  • C. six
  • D. four

正解：A

解説：
"The VMware HCX on-premises deployment requires five IP addresses: two for the WAN appliance, two for the vMotion feature, and one for the management network." In this scenario, the cloud administrator is utilizing the vMotion feature of VMware HCX to migrate several dozen workloads from an on-premises location to a VMware public cloud. They are also stretching three networks for the migration. When using vMotion, two IP addresses will be needed per vMotioned virtual machine: one for the source and one for the target. For the migration of several dozen workloads, this will require several dozens of IP addresses. Additionally, the administrator is also utilizing the capabilities of the WAN appliance to optimize migration traffic. In order to optimize the traffic, one IP address will be needed for the WAN appliance on the on-premises site, and another IP address will be needed for the WAN appliance on the public cloud side. Therefore, the total number of IP addresses that need to be reserved for the on-premises deployment of VMware HCX is the number of IP addresses required for the virtual machines plus one IP address for the WAN appliance on the on-premises site plus another IP address for the WAN appliance on the public cloud side, which totals to five IP addresses.


質問 # 39
A Cloud Administrator is tasked with choosing a correct Elastic DRS policy. The existing VMware Cloud on AWS environment consists of a single cluster with two hosts.
The following guidelines regarding the expected performance must be met:
The cluster should be able to scale automatically when additional resources are required.
Application performance should NOT be affected when the cluster scaling operation is being performed.
Which Elastic DRS policy should the cloud administrator Select?

  • A. Optimize for Best Performances
  • B. Optimize for Rapid Scale-Out
  • C. Optimize for Lowest Cost
  • D. Elastic DRS Baseline

正解：D

解説：
Based on the given guidelines, the cloud administrator should select the Elastic DRS Baseline policy [1]. This policy is designed to scale the cluster automatically when additional resources are required, while also ensuring that application performance is not affected during the scaling operation. The Elastic DRS Baseline policy also ensures that resources are allocated efficiently and optimally [1], to minimize cost while ensuring that performance requirements are met.
For more information on the Elastic DRS Baseline policy [1], see the VMware official documentation at https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.sddc-management/GUID-FDD3A8AC-E42C-4B92-9C1D-8EB49D6C7129.html.


質問 # 40
A cloud administrator is trying to Increase the disk size of a virtual machine (VM) within a VMware Cloud solution. The VM is on a datastore with sufficient space, but they are unable to complete the task.
Which file is preventing the administrator from completing this task?

  • A. The .nvram file
  • B. The .vmdk file
  • C. The .vmsn file
  • D. The .vmtx file

正解：C

解説：
.vmsn (VMware Snapshot State File): This file stores the state of a virtual machine's memory and running processes when a snapshot is taken. The presence of a .vmsn file indicates that the VM has an active snapshot. Snapshots essentially "freeze" the virtual disk (.vmdk) configuration, preventing changes like disk expansion.


質問 # 41
A cloud administrator is tasked with deploying a new software-defined data center (SDDC) in VMware Cloud on AWS and has been able to log into the VMware Cloud console Successfully. However, they cannot access the VMware Cloud on AWS Services. Which two tasks need to be performed for the administrator to gain access? (Choose two.)

  • A. The cloud administrator will need to create a new subscription for the VMware Cloud on AWS service.
  • B. The cloud administrator will need the cloudadmin role in the VMware Cloud on AWS service.
  • C. The cloud administrator will need to request access to the VMware Cloud on AWS service
  • D. The cloud administrator will need the Administrator role in the VMware Cloud on AWS service.
  • E. The cloud administrator will need the globalcloudadmin role in the VMware Cloud on AWS service.

正解：C、D

解説：
(Reference: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vcloud.admin.doc/GUID-3568D3B3-ACFE-41F1-A966-5D4784F8A7A0.html) To request access to the VMware Cloud on AWS service, the cloud administrator must log in to the VMware Cloud Console and fill out the New Subscription Request form. Once the form is filled out and submitted, the cloud administrator will receive an email with instructions on how to access the VMware Cloud on AWS service.
The cloud administrator will also need to have the Administrator role in the VMware Cloud on AWS service in order to gain access. The Administrator role allows the cloud administrator to access the VMware Cloud on AWS service, view the services available in the VMware Cloud on AWS console, and manage the resources in the SDDC.


質問 # 42
A customer needs additional capacity to handle seasonal spikes and decides to use a VMware Public cloud provider the extra capacity. Which use case describes this customer scenario?

  • A. Disaster recovery
  • B. Modernizing applications
  • C. Cloud migrations
  • D. Data center extension

正解：D

解説：
This customer scenario describes a use case of extending the capacity of an existing data center with a public cloud provider, such as VMware Cloud. This allows the customer to extend their capacity to handle seasonal spikes in demand, without having to invest in additional physical infrastructure or make significant changes to their existing setup.
According to VMware's official website, "VMware Cloud enables customers to extend their data centers to the public cloud and dynamically scale capacity up or down with the same tools, processes, and policies they use today in their private cloud or data center environments." [1]
[1] https://www.vmware.com/products/vmware-cloud.html


質問 # 43
Which hyperscaler partner is best suited for customers who need 100 GB bandwidth between SDDCs in the cloud? (Select one option)

  • A. Oracle Cloud VMware Solution
  • B. Google Cloud VMware Engine
  • C. Azure VMware Solution
  • D. VMware Cloud on AWS

正解：D

解説：
VMware Cloud on AWS provides the highest level of performance, reliability, and scalability for customers who need to move large amounts of data between their SDDCs in the cloud. It is also the only hyperscaler partner that has the ability to quickly and easily provision entire SDDCs in the cloud. In addition, VMware Cloud on AWS offers the most comprehensive enterprise-grade features, such as automated backups and disaster recovery, which provide customers with peace of mind that their data is always secure and protected.


質問 # 44
A customer is looking to leverage a VMware Public Cloud solution to provide them with additional compute capacity as seasonal demand increases for their online business.
The current on-premises data center is configured as follows:
* VMware vSphere 7.0
* VMware vSphere Distributed Switch (vDS) 7.0
* Management and Server network - 172.18.0.0/16
* vMotion network - 192.168.120.0/24
* 250 application servers
Given the information in the scenario, which capability of VMware HCX will the customer not be able to utilize?

  • A. WAN optimization
  • B. Bulk migration
  • C. Cold migration
  • D. Layer 2 extension

正解：D

解説：
According to the VMware official guide, VMware Tanzu Service Mesh is a cloud-native service mesh platform that simplifies the secure communication between microservices running in Kubernetes clusters . It provides secure and consistent network communication between services and enables policy-driven authorization and observability. With its distributed tracing capabilities, Tanzu Service Mesh can help administrators easily monitor and troubleshoot their applications. It also provides a unified platform to manage the lifecycle of Tanzu Kubernetes clusters, including provisioning, upgrades, patching, and more.
Management "and Server" network - 172.18.0.0/16
"and Server" being the 250 application servers.
https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-DBDB4D1B-60B6-4D16-936B-4AC632606909.html Detected and Restricted Source Network Types The HCX Network Extension service detects and prevents several non-supported Network Extension scenarios (items are dimmed in the Network Extension UI):
* vSphere infrastructure networks (ESXi VMkernel networks).


質問 # 45
A cloud administrator Is tasked with creating a new network segment In the software-defined data center that utilizes the corporate DHCP server to provide IP addresses.
What is the proper sequence to create the required network segments?

  • A. 1- Create a new segment attached to the Tler-0 gateway
    2. Configure the segment DHCP Ip-helper
  • B. 1. Create a DHCP server profile
    2. Create a new segment attached to the Tler-0 gateway
    3. Configure the segment DHCP config to utilize the new DHCP server profile
  • C. 1. Create a new segment attached to the Tier-1 gateway
    2. Configure the segment DHCP ip-helper
  • D. 1. Create a DHCP relay profile
    2. Create a new segment attached to the Tler-1 gateway
    3. Configure the segment DHCP config to utilize the new DHCP relay profile

正解：D

解説：
https://blogs.vmware.com/cloud/2019/07/02/dhcp-dhcp-relay-vmware-cloud-aws/ To create a new network segment in the software-defined data center that utilizes the corporate DHCP server to provide IP addresses, the proper sequence is to create a DHCP relay profile, create a new segment attached to the Tier-1 gateway, and configure the segment DHCP config to utilize the new DHCP relay profile1. This is because the DHCP relay profile contains the IP address of the external DHCP server and the DHCP relay agent that forwards the DHCP requests and responses between the segment and the DHCP server1. The segment must be attached to the Tier-1 gateway, which is the edge device that provides routing and firewall services for the segment2. The segment DHCP config allows the administrator to specify the DHCP type, the DHCP relay profile, and the DHCP options for the segment3. Reference: 1: Configure Segment DHCP Properties - VMware Docs, 2: Create or Modify a Network Segment - VMware Docs, 3: Segment DHCP Config - VMware Docs


質問 # 46
......

100%の合格率を試そう！更新されたのは2V0-33.22PSE試験問題 [2024年更新]：https://www.passtest.jp/VMware/2V0-33.22PSE-shiken.html

ベストな問題集を使おうVCP-VMC 2022 2V0-33.22PSE専門試験問題：https://drive.google.com/open?id=1xqw3uTJfpabPXNTWofs8NHGyNG_civfx

関するブログ

もっと
2V0-33.22PSE 無料問題集