
2025年最新ののVeritas VCS-284問題集PDFVCS-284最速合格したいならここ
VCS-284練習試験問題集で99%合格率Veritas試験合格させます
質問 # 145
An administrator has a scheduled policy has a scheduled policy backs up 20 clients, each with multiple mount points and multiple data streams enabled. One of the jobs has failed and is in an Incomplete slate in the Activity Monitor.
How should the administrator verify the incomplete job runs prior to the next scheduled backup?
Response:
- A. run a manual job the client
- B. run a manual job for the mount point
- C. resume the parent job
- D. resume the job
正解:A
質問 # 146
What is the default length of time that true image restore (TIR) information is retained in the NetBackup catalog?
Response:
- A. 1 day
- B. 28 days
- C. 3 days
- D. 30 days
正解:C
質問 # 147
Auto Image Replication is being used to replicate New York backups to London. The New York backups have completed. What is the next step?
Response:
- A. images are replicated to London using a storage lifecycle policy to a disk staging storage unit
- B. images are replicated to London using a storage lifecycle policy to an AdvancedDisk type storage unit
- C. images are replicated to London using a storage lifecycle policy to an NDMP storage unit
- D. images are replicated to London using a storage lifecycle policy to a Media Server Deduplication Pool
正解:D
質問 # 148
What is device serialization?
Response:
- A. A method of reporting device errors to NetBackup
- B. The order in which devices are configured by the wizard
- C. A firmware feature that enables device identification and configuration
- D. A separate interface used to configure standalone tape drives
正解:D
質問 # 149
Which two pools are created by default in NetBackup 7.7?
(Select two.)
Response:
- A. DataStore pool
- B. CatalogBackup pool
- C. Default pool
- D. Scratch pool
- E. Deduplication pool
正解:A、D
質問 # 150
Where in the NetBackup Administration Console should an administrator look to determine whether an AdvancedDisk storage server is configured?
Response:
- A. Media and Device Management > Device Monitor
- B. Media and Device Management > Devices
- C. NetBackup Management > Storage
- D. Media and Device Management > Credentials
正解:D
質問 # 151
An administrator must recover an expired image from a tape where only one remaining copy exists and there are other unexpired images on the tape. How should the administrator ensure the image is retained?
Response:
- A. run the Images on Tape report
- B. run an import on the tape
- C. verify the tape
- D. duplicate the unexpired images
正解:B
質問 # 152
An administrator wants to review the throughput of backup clients to improve performance. Which area of the NetBackup Administration Console displays the throughput of backups for all clients?
Response:
- A. Device Monitor
- B. Client Backups
- C. Status of Backups
- D. All Log Entries
正解:D
質問 # 153
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes. How can the administrator modify the time between backup attempts?
Response:
- A. modify the Policy update interval host property
- B. modify the Job retry delay host property
- C. modify the Take checkpoints every value in the backup policy
- D. modify the Schedule backup attempts host property
正解:D
質問 # 154
What must be enabled for NetBackup Accelerator?
Response:
- A. NTFS change journal
- B. True Image Restore (TIR) with move detection
- C. None of the above
- D. VsFS change log
正解:A
質問 # 155
Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?
Response:
- A. bpimagelist
- B. bpimage
- C. bplist
- D. bpdbjobs
正解:C
質問 # 156
An organization needs to have backups span between different BasicDisk storage units. The "Allow backups to span disk" setting has been enabled in Host Properties.
Which additional requirement must an administrator meet to allow backups to span disks?
Response:
- A. create a disk pool with all the appropriate disk volumes
- B. enable the "Enable standalone drive extension" setting in host properties
- C. put the BasicDisk storage units in a storage unit group
- D. configure the Media Server as a Storage Server
正解:D
質問 # 157
A file system on a server is corrupt and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below.
- Monday: A full backup
- Tuesday: A differential incremental backup
- Wednesday: A cumulative incremental backup
- Thursday: A differential incremental backup
What is the minimum number of backup images that will be used to fully restore the server?
Response:
- A. three
- B. four
- C. one
- D. two
正解:A
質問 # 158
What must be confirmed during an interactive installation or upgrade to ensure certificate deployment is secure?
Response:
- A. the admin/root password of the master server
- B. the SHA1 fingerprint of the certificate authority (CA)
- C. the Hostname of the master server
- D. the MD5 fingerprint of the certificate authority (CA)
正解:B
質問 # 159
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
Response:
- A. Inactive
- B. Disabled
- C. Active
- D. Enabled
正解:C
質問 # 160
Which utility is least helpful when troubleshooting network connectivity issues that exist between a media server and a client?
Response:
- A. nbdb_ping
- B. bpclntcmd
- C. bptestbpcd
- D. bptestnetconn
正解:B
質問 # 161
An administrator is creating a Standard policy with the option ''Use Accelerator'' to back up files on a Linux server. Which two options are disabled by default in this type of policy?
Response:
- A. Encrypt
- B. Allow multiple data streams
- C. Cross mount points
- D. Compress
- E. Collect true image restore information
正解:A、D
質問 # 162
An administrator has a Synthetic backup that fails with a status code 1, and the error message:
No images were found to synthesize (607) Which steps should the administrator take to determine why the backup failed?
Response:
- A. check the policy backup selection list.
- B. check the policy schedules.
- C. check the schedule,s Storage Unit for compatibility.
- D. check the client attributes in Host Properties.
正解:C
質問 # 163
Which report identifies volumes that were used for backups within a specified time period?
Response:
- A. Tape Summary
- B. Tape Lists
- C. Tape Logs
- D. Tape Written
正解:D
質問 # 164
Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA's full backups for a period of four months. When the administrator modifies the Full schedule, four months is missing from the selection list.
Where should the administrator add the four-month retention period under Host Properties?
Response:
- A. Media Servers > media1 > Retention Periods
- B. Master Servers > master1 > Retention Periods
- C. Master Servers > master1 > Global Attributes
- D. Clients > clientA > Global Attributes
正解:D
質問 # 165
What can you use to determine the properties and characteristics of a drive, such as its name, host, and type (such as DLT)?
Response:
- A. Robot monitor
- B. Activity monitor
- C. Device monitor
- D. Tape monitor
正解:A
質問 # 166
What is in the Backup Selections list for an Oracle backup policy?
Response:
- A. The file names of all files using by Oracle
- B. A script to be interpreted by Oracle
- C. The file names of the transaction logs
- D. The device names or drive letters of the disks
正解:B
質問 # 167
......
最新の検証済みVCS-284問題と解答で合格保証:https://www.passtest.jp/Veritas/VCS-284-shiken.html
VCS-284認証と実際の解答:https://drive.google.com/open?id=1r8jUFLkxeb8NSQcmwnPhJqVMfabYskkq