2025年01月 Nutanix NCP-MCA認定リアル2025年最新の模擬試験合格させます
NCP-MCA試験問題と有効なNCP-MCA問題集でPDF
Nutanix NCP-MCAの認定を取得することは、クラウド自動化における個人の専門知識とNutanixテクノロジーの熟練を証明するものであり、クラウドコンピューティングや自動化に関するITプロフェッショナルがキャリアを進めたい場合に貴重な資格です。また、この認定によって、Nutanixの専門家、リソース、イベントにアクセスできるグローバルコミュニティも含まれます。Nutanixは、NCP-MCA試験に備えて候補者が準備するためのトレーニングコースや学習資料を提供しています。
NCP-MCA認定試験を受験するためには、クラウドコンピューティング、仮想化、ネットワーク、セキュリティの概念について十分な理解が必要です。また、マルチクラウド環境の管理と自動化の経験が必要です。候補者は、Nutanixが提供するトレーニングコースに参加するか、Nutanixが提供する試験目的と練習問題を学習することで、試験の準備をすることができます。試験に合格すると、候補者はマルチクラウド自動化の専門知識を証明するNCP-MCA認定を受け取ることができます。
Nutanix NCP-MCA (Certified Professional - Multicloud Automation) 試験は、クラウドベースのインフラソリューションを提供する業界をリードする Nutanix によって提供されるプロフェッショナルレベルの認定資格です。この試験は、IT プロフェッショナルのマルチクラウドオートメーション分野におけるスキルと知識を評価するために設計されています。この認定資格は、Nutanix テクノロジーを使用してマルチクラウド環境を設計、展開、および管理する能力を検証したいと考えているプロフェッショナルを対象としています。
質問 # 85
Refer to the exhibit.
Saving the Calm Blueprint gives the validation error for VMware Blueprints shown in the exhibit.
What could be the cause of the error?
- A. Number of Template devices components should be equal to the number of Devices configured.
- B. Number of Template VMXNET3 components should be equal to the number of Virtual e1000 adapters configured.
- C. Number of Template NICs components should be equal to the number of Network Settings configured.
- D. Number of Template vCPU components should be equal to the number of pCPU configured.
正解：C
解説：
The error message in the exhibit indicates a mismatch between the number of network settings and the number of NICs on the VM. This is a common validation error when saving Calm Blueprints for VMware, where it is essential to ensure that these configurations match to avoid issues with VM deployment and operation1. References: 1: Nutanix NCP-MCA Certification Exam Sample Questions2
質問 # 86
When a developer launches the created Blueprint within the Blueprint Editor, the application gets deployed correctly. However, when the Blueprint is launched via Marketplace, it gets a check login error.
What is causing this issue?
- A. The credential in the Project Environment is invalid.
- B. User is not authorized to launch Blueprints.
- C. The SSH key within the user's laptop is not valid.
- D. Prism Central can't communicate with Active Directory.
正解：A
解説：
When a Blueprint is launched via Marketplace, it uses the credential that is configured in the Project Environment. If the credential is invalid, the Blueprint deployment will fail with a check login error. To fix this issue, the developer needs to verify and update the credential in the Project Environment and ensure that it has the required permissions to access the target infrastructure and applications. References: Nutanix Multicloud Automation Administration (NMCAA), page 29-30; [Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide] (https://www.nutanix.com/content/dam/nutanix/resources/support/ncp-mca-ebg.pdf), section 3.1.
質問 # 87
What two view options are available when launching Calm blueprints? (Choose two.)
- A. Consumer
- B. View as Project Admin
- C. View as Admin
- D. Developer
正解：A、D
解説：
When launching Calm blueprints, there are two view options available: Developer and Consumer. The Developer view allows you to create, edit, and manage blueprints, as well as access advanced features such as macros, actions, and scripts. The Consumer view allows you to launch and manage applications from the Marketplace, as well as access basic features such as variables, tasks, and alerts. The view option is determined by the role assigned to the user in the project. Users with the Project Admin or Project Auditor role can switch between the Developer and Consumer views, while users with the Project User role can only access the Consumer view. References:
* Nutanix Certified Professional - Multicloud Automation (NCP-MCA) v6.5, Section 1 - Describe and Differentiate Automation Concepts and Principles, page 3
* Nutanix Multicloud Automation Administration (NMCAA), Module 2 - Nutanix Calm, Lesson 2.1 - Nutanix Calm Overview, page 9
* Nutanix Calm User Guide, Introduction to Nutanix Calm, Nutanix Calm User Interface
質問 # 88
A blueprint service needs to use scaling. The requirements are:
Windows 2019 VM (12 vCPU, 24 GB memory, 500 GB volume)
Minimum VMs needed at any time and at time of deployment is 2 VMs
VMs should not exceed the project quota of 100 vCPUs or 300 GB of memory There are no other services in use within the project Which scaling VM replica settings meet all requirements?
- A. MIN: 2, MAX: 11, Default: 2
- B. MIN: 2, MAX: 7, Default: 2
- C. MIN: 2, MAX: 10, Default: 1
- D. MIN: 2, MAX: 8, Default: 1
正解：B
解説：
Scaling VM replica settings allow you to specify the minimum, maximum, and default number of VMs that can be created from a blueprint service. The minimum and default values must be equal to or greater than the number of VMs needed at any time and at time of deployment, which is 2 in this case. The maximum value must be equal to or less than the project quota divided by the VM resources, which is 100/12 = 8 for vCPUs and 300/24 = 12 for memory. The lowest of these two values is the limit for the maximum value, which is 8.
Therefore, the only option that meets all the requirements is B. MIN: 2, MAX: 7, Default: 2.
References:
* Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, page 10, Objective 3.1: Given a scenario, create a blueprint to deploy infrastructure and applications using Self-Service
* Nutanix Multicloud Automation Administration (NMCAA), Module 5: Self-Service, Lesson 5.2:
Blueprint Design, slide 23: Scaling VM Replica Settings
* Nutanix Certified Professional Multicloud Automation (NCP-MCA) 6 Exam, page 10, Objective 3.1:
Given a scenario, create a blueprint to deploy infrastructure and applications using Self-Service
質問 # 89
Which two features does the Calm Marketplace provide? (Choose two.)
- A. Library of executable tasks
- B. Set of pre-seeded application Blueprints
- C. Published and versioned Blueprints
- D. Store of all Blueprints created in Calm
正解：B、C
解説：
The Calm Marketplace acts as an application store, providing end users with a catalog of available applications. By default, Calm comes pre-seeded with validated Blueprints for multiple open source and enterprise applications. These are the set of pre-seeded application Blueprints. Additionally, Marketplace Manager acts as a staging area for publishing default and user-created Blueprints to your local Marketplace.
These are the published and versioned Blueprints. The other two options, library of executable tasks and store of all Blueprints created in Calm, are not features of the Calm Marketplace. References: Calm: Marketplace - Read the Docs and Calm: Marketplace - Read the Docs
質問 # 90
A developer has created a variable type that should be used for all deployments. However, when an administrator is creating a blueprint, the variable is not available.
How can the developer resolve this issue?
- A. Add the administrator to the Project Admin role.
- B. Add the administrator to the Developer role.
- C. Publish the variable type to Marketplace.
- D. Share the variable type with the Project.
正解：C
解説：
To make a custom variable type available for all deployments, the developer should publish the variable type to the Marketplace. By publishing it to the Marketplace, the variable type becomes accessible to all administrators and users across different projects, ensuring consistency and reusability.
References:
* Nutanix Calm documentation on Publishing to Marketplace.
* Nutanix Best Practices for Variable Management.
質問 # 91
When creating a blueprint, which Pre-create and Post-delete tasks are valid?
- A. Execute, Set variable, API, Delay
- B. Create, Start, Stop, Delete
- C. Create, Start, Stop, Soft Delete
- D. Execute, Set variable, HTTP, Delay
正解：D
解説：
Pre-create and Post-delete tasks are actions that can be performed before creating or after deleting a blueprint deployment. They can be used to integrate with external systems, set variables, or add delays. The valid tasks are Execute, Set variable, HTTP, and Delay. Create, Start, Stop, and Delete are not valid tasks, as they are part of the deployment lifecycle, not the pre-create or post-delete actions. References: Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, page 10; Nutanix Multicloud Automation Administration (NMCAA) Course, Module 5: Blueprints.
質問 # 92
Which graphic interface allows components and their dependencies within an environment to be visualized and configured?
- A. Visual Studio Code
- B. API Explorer
- C. Buleprint Editor
- D. Postman
正解：C
解説：
The Blueprint Editor in Nutanix Calm is the graphical interface that allows users to visualize and configure components and their dependencies within an environment. This tool provides a visual representation of application blueprints, enabling users to design, configure, and manage application deployments with ease.
References:
* Nutanix Calm documentation on Blueprint Editor.
* Nutanix Best Practices for Designing Blueprints.
質問 # 93
In order to give Consumers the ability to modify attributes, what should the Blueprint creator implement in the design?
- A. HTTP task with built-in macros
- B. eScript task with custom macros
- C. Custom actions
- D. Runtime variables
正解：D
質問 # 94
During the deployment of a multi-step Blueprint, a failure is encountered. The administrator corrected the failed step and saved the Blueprint.
What should the administrator do next?
- A. Delete the failed application and Launch a new application.
- B. Soft Delete the failed application and Launch a new application.
- C. Upon clicking Save the Blueprint task will be retried automatically.
- D. Use Continue in the failed application to retry.
正解：D
解説：
If a Blueprint deployment fails, the administrator can use the Continue option in the Self-Service Portal to resume the deployment from the point of failure. This option will retry the failed task and continue with the remaining tasks in the Blueprint. The administrator does not need to delete the application or launch a new one, as this would waste time and resources. Saving the Blueprint will not automatically retry the task, as the Blueprint is only a template for the deployment.
References:
* Nutanix Certified Professional - Multicloud Automation (NCP-MCA) v6.5, Section 3, Objective 3.1:
Determine the causes of a Blueprint or Runbook deployment failure.
* Nutanix NCP-MCA Certification Exam Sample Questions, Question 17.
質問 # 95
An administrator wants to create a blueprint for a development environment that uses an existing on-premise GitLab repository. Every new development environment requires a new user in the GitLab repo.
Which two tasks should the administrator perform within a Calm blueprint to automate this process? (Choose two.)
- A. Create runtime-editable variables for user and password in the blueprint.
- B. Add a task within the service in order to ask for user and password at runtime.
- C. Create a task script in order to login with ssh to GitLab and create a random user and password.
- D. Create an HTTP pre-create task to create the user in GitLab via REST API.
正解：A、D
質問 # 96
When configuring Calm to use Kubernetes as a provider, what two options does an administrator have as Kubernetes types? (Choose two.)
- A. OpenShift
- B. Rancher
- C. Karbon
- D. Vanilla
正解：C、D
解説：
When configuring Calm to use Kubernetes as a provider, the administrator can choose between two Kubernetes types: Karbon and Vanilla. Karbon is Nutanix's own Kubernetes distribution that is integrated with Prism and AHV. Vanilla is any other Kubernetes distribution that is not Karbon, such as OpenShift, Rancher, or EKS. The administrator needs to provide the Kubernetes API endpoint and credentials for the Vanilla type, while the Karbon type is automatically discovered by Calm. References: Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, page 14; Nutanix NCP-MCA Questions, question 102.
質問 # 97
An administrator is configuring Playbooks and is concerned about adding or reducing CPU and memory resources to VMs.
Which two prerequisites should an administrator take into consideration when configuring the Playbooks?
(Choose two.)
- A. Memory can be removed from a powered on VM if the guest OS supports it
- B. VM must be powered off to reduce memory
- C. VM must be powered off to add CPU
- D. CPU can be added to a powered on VM if the guest OS supports it
正解：A、D
解説：
When configuring Playbooks to automate the scaling of CPU and memory resources for VMs, the administrator should consider the following prerequisites:
* CPU can be added to a powered on VM if the guest OS supports it. This is also known as hot-plug CPU.
The administrator should check the compatibility of the guest OS and the hypervisor before enabling this feature. For example, Windows Server 2019 supports hot-plug CPU on AHV, ESXi, and Hyper-V, but not on XenServer1.
* Memory can be removed from a powered on VM if the guest OS supports it. This is also known as hot-unplug memory. The administrator should check the compatibility of the guest OS and the hypervisor before enabling this feature. For example, Linux supports hot-unplug memory on AHV, ESXi, and XenServer, but not on Hyper-V2.
* VM must be powered off to add CPU if the guest OS does not support hot-plug CPU. This is also known as cold-plug CPU. The administrator should plan for the downtime required to power off and power on the VM after adding CPU.
* VM must be powered off to reduce memory if the guest OS does not support hot-unplug memory. This is also known as cold-unplug memory. The administrator should plan for the downtime required to power off and power on the VM after reducing memory. References: Nutanix Multicloud Automation Administration (NMCAA), page 10; Nutanix Certified Professional - Multicloud Automation (NCP-MCA), section 3; Nutanix Support Portal - Guest OS Compatibility Matrix
質問 # 98
Which Providers are supported in Multi-VM Blueprints? (Choose two.)
- A. Oracle Cloud
- B. Microsoft Azure
- C. IBM Cloud
- D. Nutanix
- E. Amazon AWS
正解：D、E
解説：
According to the Nutanix Multicloud Automation Administration (NMCAA) course1, you can create and configure multi-VM blueprints for the Nutanix, AWS, VMware, GCP, and Azure providers. However, according to the Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide2, the exam objectives only cover Nutanix and AWS as the providers for multi-VM blueprints.
Therefore, the correct answer is C. Nutanix and E. Amazon AWS. References: Nutanix Multicloud Automation Administration (NMCAA) course and Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide
質問 # 99
How can a Runbook be shared across projects?
- A. Publish to GCP Marketplace
- B. Publish to Azure Marketplace
- C. Publish to Calm Marketplace
- D. Publish to /WS Marketplace
正解：C
解説：
To share a Runbook across projects in Nutanix Calm, it should be published to the Calm Marketplace. The Calm Marketplace allows administrators to publish and share blueprints, runbooks, and other resources, making them available for use across different projects within the organization.
References:
* Nutanix Calm documentation on Marketplace Publishing.
* Nutanix Best Practices for Sharing Runbooks.
質問 # 100
A developer has created a variable type that should be used for all deployments. However, when an administrator is creating a blueprint, the variable is not available.
What must the developer do to make it visible?
- A. Add the administrator to the Project Admin role.
- B. Share the variable with the project.
- C. Add the administrator to the Developer role.
- D. Publish the variable to Marketplace.
正解：B
解説：
A variable is a placeholder for a value that can be used in a blueprint or a script. A variable can be defined at the global, project, or blueprint level. A global variable is available to all projectsand blueprints, while a project variable is available to all blueprints within a project, and a blueprint variable is available only to the blueprint where it is defined. To make a variable visible to a blueprint, the developer needs to share the variable with the project that contains the blueprint. This can be done by going to the Variables page in the Calm UI and clicking on the Share button next to the variable name. Then, the developer needs to select the project from the drop-down list and click on Save. References: Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, page 14; Nutanix Calm User Guide, section 3.2.
質問 # 101
What is the most optimal way to transfer Playbooks between different Nutanix Cloud Managers (NCM)?
- A. Recreate the Playbook
- B. Use Date Lens to migrate.
- C. NCM Disaster Recovery
- D. Export and Import
正解：D
解説：
According to the Nutanix Support & Insights1, the most optimal way to transfer Playbooks between different Nutanix Cloud Managers (NCM) is to use the Export and Import function. This function allows you to save a copy of your Playbook as a JSON file and then upload it to another NCM instance. This way, you can easily reuse your Playbooks across different environments without having to recreate them from scratch or use other methods that may not be compatible or efficient. References: 1: Nutanix Support & Insights, Playbooks Summary View1
質問 # 102
......
NCP-MCA問題集を無料PDFゲットせよ最近更新された問題：https://www.passtest.jp/Nutanix/NCP-MCA-shiken.html
NCP-MCAブレーン問題集で学習ガイドには試験合格するための秘訣：https://drive.google.com/open?id=1j4nt_cHjVGBHJGLmbsu3YF5D6L_F3yNe