[2025年04月]更新のUiPath-ADPv1問題集には100%厳密検証された問題と解答で合格保証もしくは全額返金 [Q106-Q131]

[2025年04月]更新のUiPath-ADPv1問題集には100%厳密検証された問題と解答で合格保証もしくは全額返金

合格させるUiPath UiPath-ADPv1試験には練習テスト問題集豪華お試しセット

質問 # 106
What is the recommended approach for a user to log custom information at each breakpoint while executing a process in Debug mode?

• A. Insert a Log Message before each activity with a breakpoint.
• B. Select Log Activities from the Debug panel.
• C. Set Log Message option in the Breakpoint Settings.
• D. Select Execution Trail from the Debug panel.

正解：C

解説：
The Log Message option in the Breakpoint Settings allows the user to log custom information at each breakpoint while executing a process in Debug mode. This option can be accessed by right-clicking on a breakpoint and selecting Breakpoint Settings. The user can then enter a message that will be logged in the Output panel when the breakpoint is hit. The message can include variables, arguments, and pseudovariables, such as $PID, $TID, $FUNCTION, etc1 Option B is not recommended, because it requires the user to insert a Log Message activity before each activity with a breakpoint, which can be tedious and clutter the workflow. Option C is not relevant, because it enables or disables logging for all activities in the project, not just the breakpoints. Option D is not related, because it shows the execution flow of the process, not the custom information at each breakpoint.
References: 1: Studio - The Breakpoints Panel

質問 # 107
A developer has created a variable of type String called "MyNumbers" and assigned to it the following value:
"1. 2, 3.4, 5. 6". What is the resulting data type for the expression MyNumbers.Split("."c)(1)?

• A. String
• B. Array of String
• C. lnt32
• D. Double

正解：A

解説：
When the Split method is used on a String variable, the result is an array of substrings. However, accessing a specific element of this array (e.g., MyNumbers.Split("."c)(1)) returns a single substring, which is a String.

質問 # 108
A developer plans to build an automation process using the REFramework with Orchestrator queues. Based on UiPath best practice, what is the recommended sequence of steps to update the template and create/update Queues and Values?
Instructions: Drag the Description found on the left and drop on the correct Step Sequence found on the right.

正解：

解説：

Explanation:
A screenshot of a computer program Description automatically generated

To align with UiPath's best practices when updating the REFramework template for use with Orchestrator queues, the sequence of steps should ensure proper setup of the queues in Orchestrator, configuration of the project to interact with these queues, and implementation of the business logic to process items from the queues.
Here's how the steps should be sequenced:
Step 1: Create the queue in Orchestrator and set its Auto Retry value as required by the process documentation.This step ensures that the queue is available in Orchestrator with the correct settings before the automation attempts to interact with it.
Step 2: Edit the project's configuration file (Data/Config.xlsx) and configure parameters OrchestratorQueueName and OrchestratorQueueFolder.Once the queue is created, the next step is to ensure that the automation project is configured to reference the correct queue and folder within Orchestrator.
Step 3: Edit GetTransactionData.xaml workflow and assign a proper value for the out_TransactionID argument.This configuration allows the workflow to correctly fetch transaction items from the Orchestrator queue for processing.
Step 4: Edit workflow Process.xaml and implement the logic to process each TransactionItem.Finally, the core processing logic that operates on each queue item is implemented, allowing the automation to perform the necessary actions for each transaction.

質問 # 109
Given a dataiable "dt" with the following header:
"Surname. Address. Zip Code, Given Name, Phone Number.
What is the correct configuration of the Invoke Method activity so that the resulting header will be:
"Surname. Given Name. Address. Zip Code. Phone Number".

• A.
• B.
• C.
• D.

正解：B

質問 # 110
What is the correct execution order of the State activity sections?
instructions: Drag the Description found on the "Left" and drop on the correct Execution Order found on the
"Right"

正解：

解説：

質問 # 111
A developer aims to employ the REFramework for automating a business process that Involves a TransactionData collection (DataTable) comprising vendor names and addresses.
Instructions: Choose the appropriate variable type for the Transactionltem from the provided drop-down list in the following exhibit.

正解：

解説：

Explanation:
The REFramework (Robotic Enterprise Framework) in UiPath is designed to work with transactional data.
For a process that involves iterating over a DataTable where each row represents a transaction item, the appropriate variable type for the TransactionItem would be a DataRow.
In the context of REFramework, a DataRow is typically used to represent a single transaction item when the transaction data is contained within a DataTable. This allows the framework to process each row (or transaction) one by one.
Therefore, the correct variable type for the TransactionItem from the drop-down list should be DataRow.

質問 # 112
What are the steps to publish a project from UiPath Studio?
Instructions: Drag the Description found on the "Left" and drop on the correct Step Sequence found on the
"Right".

正解：

解説：

Explanation:

質問 # 113
A developer needs to use the REFramework in order to implement a linear process. Which value should be set to "out_Transactionltem" the first time when it enters the Get Transaction Data state?

• A. It can be set to a static value and. in order to respect the UiPath best practices, this value should be taken from "Config.xlsx".
• B. The process will not enter the Get Transaction Data state because a linear process is not transactional.
• C. It should be set to Nothing because a linear process should not enter the second time in the Get Transaction Data state.
• D. It should be set to the next queue item in order to be, further on, processed.

正解：C

解説：
The out_TransactionItem argument is an output argument of the GetTransactionData workflow, which is used to store the data of the current transaction item1. The REFramework is a template for creating robust and scalable automation projects that uses the State Machine workflow type2. The REFramework is designed for transactional processes, which are processes that handle multiple items of data in a loop3. However, it can also be adapted for linear processes, which are processes that execute a sequence of actions only once.
To use the REFramework for a linear process, the out_TransactionItem argument should be set to Nothing the first time when it enters the Get Transaction Data state. This will ensure that the process will not enter the Get Transaction Data state again, as the condition for the transition from the Get Transaction Data state to the Process Transaction state is out_TransactionItem isNot Nothing1. Setting the out_TransactionItem argument to Nothing will also trigger the End Process state, which will perform the final actions and close the application1.
Option A is incorrect, because the process will enter the Get Transaction Data state even if it is a linear process, as it is the first state in the REFramework. Option B is incorrect, because there is no queue item in a linear process, as there is only one item of data to be processed. Option D is incorrect, because setting the out_TransactionItem argument to a static value will cause the process to enter the Get Transaction Data state repeatedly, as the condition for the transition will always be true.
References: 1: The UiPath ReFramework 2: State Machine 3: Transactional Business Process : [Linear Business Process]

質問 # 114
In UiPath Studio, how can a specific amount of time be subtracted from the current date using DateTime and TimeSpan variables in the VB.NET?

• A. Assign the subtraction result to a DateTime variable with the following syntax Today.Subtract(Span).
• B. Call Now.Subtract(Span) directly, without using a DateTime variable.
• C. Multiply the TimeSpan variable by -1 and then add it to the DateTime variable.
• D. Use the Add method on the DateTime variable and pass a negative TimeSpan value.

正解：D

解説：
In UiPath Studio, you can use DateTime and TimeSpan variables to store and manipulate date and time values. A DateTime variable represents a specific point in time, such as the current date and time, or a date in the past or future. A TimeSpan variable represents a time interval, such as one hour, two days, or three weeks.
To subtract a specific amount of time from the current date using DateTime and TimeSpan variables in VB.
NET, you can use the Add method on the DateTime variable and pass a negative TimeSpan value. For example, if you have a DateTime variable called Today that stores the current date and time, and a TimeSpan variable called Span that stores the time interval you want to subtract, you can write:
Today.Add(-Span)
This expression returns a new DateTime value that is the result of subtracting the Span value from the Today value. For example, if Today is 2024-02-08 10:51:49 and Span is 1.02:10:04, then the expression returns
2024-02-07 08:41:45.
The other options are not correct ways of subtracting a TimeSpan value from a DateTime value in VB.NET.
Option A is invalid, because you cannot multiply a TimeSpan value by a number. Option B is incorrect, because the Subtract method on the DateTime variable returns a TimeSpan value, not a DateTime value.
Option D is incorrect, because the Now property is not a method, and it cannot take a TimeSpan value as an argument.
References: Variables - Date and Time Variables - UiPath Documentation Portal, DateTime.Add Method (System) - Microsoft Docs, DateTime.Subtract Method (System) - Microsoft Docs, Date and Time Arithmetic
- UiPath Community Forum

質問 # 115
Which of the following statements correctly illustrates using LINO to process data in a UiPath project?

• A. Using LINQ to identify the longest string in a list of strings by writing listOfStrings.Max(Function(x) x.Lengthl))
• B. Utilizing LINQ to find the total sum of integers in a list by writing listOfintegers.Sum(Function(x) x).
• C. Applying LINO to filter out emails in a list of strings containing multiple email addresses by writing listOfStrings.FilterEmails().ToList()
• D. Employing LINO to convert DataTable to JSON format by writing dataTable.ToJSONf)

正解：B

解説：
LINQ (Language Integrated Query) in UiPath is used for efficient data manipulation. The LINQ query
'listOfintegers.Sum(Function(x) x)' correctly demonstrates how to sum integers in a list, making use of LINQ's straightforward and readable syntax.

質問 # 116
Which of the following activities in UlPath Studio have the Verify Execution property available?

• A. Click activity
• B. Assign activity
• C. Invoke workflow activity
• D. If activity

正解：A

解説：
In UiPath Studio, the Verify Execution property is available in the Click activity. This property, when enabled, ensures that the click action has been successfully executed on the specified UI element.

質問 # 117
Which command in the UiPath installation folder configures the UIPath.RemoteDebugging.Agent utility on a Windows robot to accept remote debugging requests from Studio?

• A. UiPath-RemoteDebuqqinq.Aqent.exe enable -port -password -verbose
• B. UiPath.RemoteDebuqqinq.Aqent.exe start -port -password -verbose
• C. dotnet ./UiPath.RemoteDebuqqinq.Aqent.dll enable -port -password -verbose
• D. UiPath.RemoteDebuqqinq.Aqent.exe enable -port -username -password -verbose

正解：A

質問 # 118
Given the following list of arguments:

and the following code:

What is the value that will be displayed in the Output Panel at the end of the sequence below:

• A. 0
• B. 1
• C. 2
• D. 3

正解：C

解説：
The value that will be displayed in the Output Panel at the end of the sequence is 9. This is because the code in the Invoke Code activity is looping through the array in_numArray and setting the variable out_numVar to the highest value in the array. The array in_numArray has the values {1, 2, 7, 9, 4} as shown in the list of arguments. The variable out_numVar is initialized to 0. The For loop iterates from 0 to the upper bound of the array, which is 4. In each iteration, the If condition checks if the current element of the array is greater than the current value of out_numVar. If it is, then out_numVar is assigned to the current element of the array.
Otherwise, out_numVar remains unchanged. Therefore, after the first iteration, out_numVar becomes 1. After the second iteration, out_numVar becomes 2. After the third iteration, out_numVar becomes 7. After the fourth iteration, out_numVar becomes 9. After the fifth iteration, out_numVar remains 9, since 4 is not greater than 9. The Write Line activity outputs the value of out_numVar to the console, which is
9. References: Invoke Code

質問 # 119
A developer needs to create a repetitive process in the REFramework. Following the best practices, which action(s) should be performed to defend against potential robot crashes such as "out of memory"?

• A. Build a script that compares current CPU usage values to a threshold and clears data as needed.
• B. After every transaction, clear the transaction data, close the applications, and re-open the applications.
• C. Add a "Clear Collection" activity at the beginning of the Process.xaml workflow.
• D. All "Invoke Workflow File" activities from the Main.xaml file should be marked with the Isolated option.

正解：D

解説：
The best practice for creating a repetitive process in the REFramework and defending against potential robot crashes such as "out of memory" is to mark all "Invoke Workflow File" activities from the Main.xaml file with the Isolated option. The Isolated option enables the workflow to run in a separate process, which reduces the memory consumption and the risk of memory leaks. It also improves the stability and the performance of the robot, as it isolates the errors and the exceptions that might occur in the invoked workflow. The Isolated option can be found in the Properties panel of the "Invoke Workflow File" activity, under the Options category. By marking all the invoked workflows as Isolated, the developer can ensure that the robot can handle a large number of transactions without crashing or slowing down

質問 # 120
What is the correct sequence of steps in a REFramework project that is linked to Orchestrator it an application exception occurs on a Queue Item m the Process Transaction stale?
Instructions: Drag the Description found on the "Left" and drop on the correct Step Sequence found on the Right".

正解：

解説：

質問 # 121
Given the following variables assignments:

What will the output of the following conditional be: outputX = If(CInt(doubleX+Cdbl(intX)
+CDbl(stringX))> 38.30, 1, 0)

• A. Compilation error
• B. 0
• C. Error during runtime
• D. 1

正解：C

解説：
The conditional statement attempts to convert all variables to Double and then adds them up to compare against 38.30. However, the string "9.1" cannot be directly converted to a Double with CDbl because it is not in a correct format that can be recognized as a number (it might be due to the fact that it's a string with a comma instead of a period for a decimal point, depending on the culture settings of the system). This will cause a runtime error during the execution of the conditional statement.References:
Microsoft Visual Basic Guide: Type Conversion Functions

質問 # 122
Which of the following statements is true about the existing UiPath Studio installation packages?

• A. The Automation Developer installation package installs only UiPath Studio, Assistant, and Robot.
• B. The Attended Robot installation package installs only the UiPath Robot.
• C. The Unattended Robot installation package installs only UiPath Studio, Assistant, and Robot.
• D. The Attended Robot installation package installs only UiPath Studio, and Robot.

正解：B

解説：
The statement that is true about the existing UiPath Studio installation packages is that the Attended Robot installation package installs only the UiPath Robot. The UiPath Robot is the component that executes the automation workflows designed in UiPath Studio. The Attended Robot installation package is intended for scenarios where the Robot works on the same machine as a human user and requires human input or supervision. The Attended Robot installation package does not include UiPath Studio or UiPath Assistant.
UiPath Studio is the component that allows the developer to design and debug the automation workflows.
UiPath Assistant is the component that allows the user to manage and run the automation workflows on their machine. The Unattended Robot installation package and the Automation Developer installation package both include UiPath Studio, UiPath Assistant, and UiPath Robot, but they are intended for different scenarios. The Unattended Robot installation package is for scenarios where the Robot works on a dedicated machine and does not require human input or supervision. The Automation Developer installation package is for scenarios where the developer needs to create and test the automation workflows on their machine. References: [UiPath Installation Guide], [UiPath Robot], [UiPath Studio], [UiPath Assistant]

質問 # 123
While working in an RPA testing project, you encountered the following activity in one of the workflows included in the project.

What action can you perform in your mocked file to replace the functionality of the MessageBox with a LogMessage during mock testing?

• A. Remove mock activity.
• B. Synchronize mock.
• C. Surround activity with mock.
• D. Create mock workflow.

正解：C

解説：
To replace the functionality of the MessageBox with a LogMessage during mock testing, the developer can perform the action of Surround activity with mock. This action inserts a mock activity around the selected activity, which allows the developer to change the behavior of the activity for testing purposes. For example, the developer can right-click on the MessageBox activity and select Surround activity with mock from the dropdown menu. This will create a mock activity that contains the MessageBox activity. The developer can then edit the mock activity and replace the MessageBox activity with a LogMessage activity, which will write the message to the output panel instead of displaying it in a dialog box. This way, the developer can test the functionality of the workflow without having to interact with the MessageBox dialog box. References: [Mock Testing], [Surround Activity with Mock]

質問 # 124
In a UiPath development scenario, which type of process design would be the most appropriate for an automation task that executes actions in a straightforward progression without iteration or branching?

• A. Transactional Process
• B. Iterative Process
• C. Sequential Process
• D. Linear Process

正解：C

解説：
A sequential process is a type of process design that executes actions in a straightforward progression without iteration or branching. A sequential process is composed of a series of activities that are executed one after another, from top to bottom, in a linear fashion. A sequential process is best suited for simple scenarios when activities follow each other and there is no need for complex logic or decision making12.
The other options are not appropriate for an automation task that executes actions in a straightforward progression without iteration or branching, because they involve different types of process design that require more complex structures and logic. For example:
A transactional process is a type of process design that executes actions on a set of data items, one at a time, in a loop. A transactional process is composed of a dispatcher that adds data items to a queue, and a performer that processes each data item from the queue and updates its status. A transactional process is best suited for scenarios when activities need to be repeated for each data item and there is a need for reliability and scalability34.
An iterative process is a type of process design that executes actions repeatedly until a certain condition is met or a certain number of iterations is reached. An iterative process is composed of a loop that contains a set of activities and a condition that controls the exit of the loop. An iterative process is best suited for scenarios when activities need to be performed multiple times and there is a need for dynamic control of the execution flow56.
A linear process is not a type of process design, but a term that refers to a process that has a clear start and end point, and a well-defined sequence of steps that lead to a specific outcome. A linear process can be implemented using different types of process design, depending on the complexity and logic of the steps involved7.
References:
1: Studio - Workflow Design - UiPath Documentation Portal 2: Studio - Sequence - UiPath Activities 3: Studio - Transactional Business Process - UiPath Documentation Portal 4: Studio - Transactional Process - UiPath Activities 5: Studio - Control Flow - UiPath Documentation Portal 6: Studio - Loops - UiPath Activities 7: What is a Linear Process? - Definition from Techopedia

質問 # 125
While working in an RPA testing project, you encountered the following activity in one of the workflows included in the project.

What action can you perform in your mocked file to replace the functionality of the MessageBox with a LogMessage during mock testing?

• A. Remove mock activity.
• B. Synchronize mock.
• C. Surround activity with mock.
• D. Create mock workflow.

正解：C

解説：
To replace the functionality of the MessageBox with a LogMessage during mock testing, the developer can perform the action of Surround activity with mock. This action inserts a mock activity around the selected activity, which allows the developer to change the behavior of the activity for testing purposes. For example, the developer can right-click on the MessageBox activity and select Surround activity with mock from the dropdown menu. This will create a mock activity that contains the MessageBox activity. The developer can then edit the mock activity and replace the MessageBox activity with a LogMessage activity, which will write the message to the output panel instead of displaying it in a dialog box. This way, the developer can test the functionality of the workflow without having to interact with the MessageBox dialog box. References: [Mock Testing], [Surround Activity with Mock]

質問 # 126
Which of the following describes the correct hierarchy of the elements in the Object Repository tree structure?

• A. Version, Application, Screen, Ul Element.
• B. Application, Version, Screen, Ul Element.
• C. Screen, Application, Version, Ul Element.
• D. Application, Screen, Ul Element, Version.

正解：D

解説：
The Object Repository in UiPath organizes elements in a hierarchical structure that reflects the logical arrangement of user interfaces and elements as they are captured and used in automation projects.
The correct hierarchy for elements in the Object Repository tree structure is:
A: Version, Application, Screen, UI Element.
This hierarchy starts with the 'Version', which could refer to the specific version of the application you are automating. Under each version, there could be multiple 'Applications' that you have elements for. Within each application, you might have captured various 'Screens' or dialogs, and within each screen, there are individual
'UI Elements' like buttons, text fields, dropdown menus, etc., that the automation interacts with.
However, it's important to note that in practice, when you are working with UiPath Studio and its Object Repository, the hierarchy usually starts with the 'Application', then under it, you have different 'Screens' of the application, and under each screen, you have the 'UI Elements'. The 'Version' is typically managed separately and is not a level in the hierarchy tree but rather a property or attribute of the application or element.
Therefore, the most practical answer reflecting the usage in UiPath Studio would be:
C: Application, Screen, UI Element, Version.
The 'Version' here would be understood not as a layer in the hierarchy but rather as an attribute that can be associated with the 'Application' or 'UI Element'.

質問 # 127
What do the percentages from the Test Explorer panel represent?

• A. Passing percent.
• B. Correctness of the code percent.
• C. Percent of test data run.
• D. Coverage percent.

正解：A

解説：
The percentages from the Test Explorer panel represent the passing percent of the test cases that are executed.
The Test Explorer panel shows the status of each test case, the total number of test cases, the number of passed test cases, the number of failed test cases, and the passing percent. The passing percent is calculated by dividing the number of passed test cases by the total number of test cases and multiplying by 100. For example, if there are 10 test cases and 8 of them pass, the passing percent is 80%. References: Test Explorer

質問 # 128
The following table is stored in a variable called "dt".

Which query can be used to extract the table column names and store them in a list?

• A. dt.Columns.Select(function(x) x.ColumnName).ToList()
• B. dt.Columns.Cast(Of Datacolumn).Select(function(x) x.ColumnName).ToList()
• C. dt.Columns.Cast(Of Datacolumn).Select(function(col) col).ToList()
• D. dt.AsEnumerable.Select(function(x) x.ColumnName).ToList()

正解：B

解説：
The DataTable object in UiPath is a representation of a table with rows and columns that can store data of various types. It has a Columns property that returns a collection of DataColumn objects that describe the schema of the table1. To extract the column names from a DataTable and store them in a list, you can use the following query:
dt.Columns.Cast(Of Datacolumn).Select(function(x) x.ColumnName).ToList() This query does the following:
* It casts the Columns collection to a generic IEnumerable(Of DataColumn) using the Cast(Of T) extension method2. This is necessary because the Columns collection is a non-generic IEnumerable that cannot be used with LINQ methods directly3.
* It selects the ColumnName property of each DataColumn object using the Select extension method and a lambda expression4. The ColumnName property returns the name of the column as a string5.
* It converts the resulting IEnumerable(Of String) to a List(Of String) using the ToList extension method6.
The other options are incorrect because:
* Option B does not cast the Columns collection to a generic IEnumerable(Of DataColumn), which will cause a runtime error.
* Option C uses the AsEnumerable extension method, which returns a collection of DataRow objects, not DataColumn objects7. Therefore, the ColumnName property will not be available.
* Option D selects the whole DataColumn object instead of its ColumnName property, which will result in a list of DataColumn objects, not strings.
References:
* DataTable Class (System.Data) | Microsoft Docs
* Enumerable.Cast(Of TResult) Method (System.Linq) | Microsoft Docs
* DataColumnCollection Class (System.Data) | Microsoft Docs
* Enumerable.Select(Of TSource, TResult) Method (System.Linq) | Microsoft Docs
* DataColumn.ColumnName Property (System.Data) | Microsoft Docs
* Enumerable.ToList(Of TSource) Method (System.Linq) | Microsoft Docs
* DataTableExtensions.AsEnumerable Method (System.Data) | Microsoft Docs

質問 # 129
How should the computation of the signature be done for client apps that receive Orchestrator requests and need to check their authenticity?
Instructions: Drag the Description found on the left and drop on the correct Step Sequence found on the right.

正解：

解説：

質問 # 130
When a developer runs a process using the REFramework, with the process utilizing Orchestrator queues and a queue already created with the Name provided and the Auto Retry function disabled, which states will be executed without errors?

• A. Initialization -> Process Transaction -> End Process
• B. Initialization -> Get Transaction Data -> End Process
• C. Initialization -> End Process
• D. Initialization -> Get Transaction Data -> Process Transaction -> End Process

正解：D

解説：
The states that will be executed without errors when a developer runs a process using the REFramework, with the process utilizing Orchestrator queues and a queue already created with the Name provided and the Auto Retry function disabled, are Initialization, Get Transaction Data, Process Transaction, and End Process. The REFramework is a template that provides a robust and scalable structure for building automation processes.
The REFramework consists of four main states: Initialization, Get Transaction Data, Process Transaction, and End Process. The Initialization state is responsible for initializing the application, reading the configuration file, and logging in to the Orchestrator. The Get Transaction Data state is responsible for fetching the next transaction item from the Orchestrator queue and assigning it to the TransactionItem variable. The Process Transaction state is responsible for executing the main logic of the process for the current transaction item.
The End Process state is responsible for closing the application, logging out of the Orchestrator, and performing any cleanup actions. If the process utilizes Orchestrator queues and a queue already exists with the Name provided and the Auto Retry function disabled, then the process will be able to execute these states without errors, assuming that there are no other issues or exceptions in the workflow. References: [Robotic Enterprise Framework], [REFramework States]

質問 # 131
......

2025年最新の有効なUiPath-ADPv1テスト解答UiPath試験PDF：https://www.passtest.jp/UiPath/UiPath-ADPv1-shiken.html

無料UiPath UiPath-ADPv1試験問題と解答トレーニングにはPassTest：https://drive.google.com/open?id=11V3WhfsRkswGzsxe-BYPbNkSgQpR95MR