[2025年05月21日] 手に入れよう！最新2V0-41.24認定された有効な試験問題集解答
100%合格率保証付きの素晴らしい2V0-41.24試験問題PDF
VMware 2V0-41.24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 37
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?
- A. Loopback Router Port
- B. VLAN Uplink
- C. Downlink interface
- D. Service interface
正解：D
解説：
A Service interface on the Tier-0 Gateway is required to make NSX Edge Services, such as NAT or load balancing, available to a VM on a VLAN-backed logical switch. The Service interface allows the Tier-0 Gateway to connect directly to the VLAN-backed network, enabling Edge Services to interact with VMs on that network.
質問 # 38
Which three data collection sources are used by NSX Network Detection and Response to create correlations/Intrusion campaigns? (Choose three.)
- A. IDS/IPS events from the ESXi hosts and NSX Edge nodes
- B. Files and anti-malware (lie events from the NSX Edge nodes and the Security Analyzer
- C. East-West anti-malware events from the ESXi hosts
- D. Suspicious Traffic Detection events from NSX Intelligence
- E. Distributed Firewall flow data from the ESXi hosts
正解：A、B、D
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-14BBE50D-9931-4719-8FA7-884539C0D277.html
質問 # 39
Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)
- A. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
- B. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
- C. Create an OAuth 2.0 client in VMware Identity Manager.
- D. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
- E. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
正解：B、C
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-EAAD1FBE-F750-
4A5A-A3BF-92B1E7D016FE.html
質問 # 40
What should an NSX administrator check to verify that VMware Identity Manager integration is successful?
- A. From the NSX Ul the URI in the address bar must have locaMalstf part of it.
- B. From VMware Identity Manager the status of the remote access application must be green
- C. From the NSX Ul the status of the VMv/are Identity Manager Integration must be Enabled'
- D. From the NSX CLI the status of the VMware Identity Manager Integration must be Configured'
正解：D
解説：
To verify that VMware Identity Manager integration is successful with NSX, the administrator should check the NSX UI for the integration status. If it is configured correctly, the status should be marked as "Enabled," indicating that the integration is active and functioning.
質問 # 41
Which two of the following parameters are required for deploying the NSX Application Platform? (Choose two.)
- A. Interface Service Name
- B. Upload Kubernetes Configuration File
- C. Interface Name
- D. Cluster Format Type
- E. Upload XML File
正解：B、E
解説：
Cluster Format Type: This parameter specifies the type of cluster format that will be used for the NSX Application Platform deployment.
Upload Kubernetes Configuration File: NSX Application Platform requires a Kubernetes environment, and the configuration file for Kubernetes must be uploaded to facilitate the deployment.
質問 # 42
An architect receives a request to apply distributed firewall in a customer environment without making changes to the network and vSphere environment. The architect decides to use Distributed Firewall on VDS.
Which two of the following requirements must be met in the environment? (Choose two.)
- A. NSX version must be 3.0 and later
- B. vCenter 8.0 and later
- C. VDS version 6.6.0 and later
- D. NSX version must be 3.2 and later
正解：C、D
解説：
Distributed Firewall on VDS is a feature of NSX-T Data Center that allows users to install Distributed Security for vSphere Distributed Switch (VDS) without the need to deploy an NSX Virtual Distributed Switch (N-VDS). This feature provides NSX security capabilities such as Distributed Firewall (DFW), Distributed IDS/IPS, Identity Firewall, L7 App ID, FQDN Filtering, NSX Intelligence, and NSX Malware Prevention. To enable this feature, the following requirements must be met in the environment:
The NSX version must be 3.2 and later1. This is the minimum version that supports Distributed Security for VDS.
The VDS version must be 6.6.0 and later1. This is the minimum version that supports the NSX host preparation operation that activates the DFW with the default rule set to allow.
Reference:
Overview of NSX IDS/IPS and NSX Malware Prevention
質問 # 43
Drag and Drop Question
Match the NSX Intelligence recommendations with their correct purpose.
正解：
解説：
Explanation:
The security policy recommendations are of the East-West distributed firewall (DFW) security policies in the application category.
The security group recommendations consist of the VMs or physical servers whose traffic flows were analyzed for the time period and the boundary you had specified.
The service recommendations are service objects that were used by applications in the VMs or physical servers that you had specified, but the services are not yet defined in the NSX inventory.
https://docs.vmware.com/en/VMware-NSX-Intelligence/4.1/user-guide/GUID-BA3B0D67-4AA8-
439E-A845-4598DAD6B9D0.html
質問 # 44
Which of the two following characteristics about NAT64 are true? (Choose two.)
- A. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.
- B. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
- C. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
- D. NAT64 is supported on Tier-0 and Tier-1 gateways.
- E. NAT64 is supported on Tier-1 gateways only.
正解：A、D
解説：
NAT64 is supported on both Tier-0 and Tier-1 gateways, allowing for IPv6-to-IPv4 address translation at different gateway levels within NSX.
NAT64 requires the Tier-1 gateway to be configured in active-standby mode, as this configuration ensures stateful translation and consistency for IPv6-to-IPv4 traffic handling.
質問 # 45
What are three NSX Manager roles? (Choose three.)
- A. zookeepet
- B. manager
- C. policy
- D. master
- E. cloud
- F. controller
正解：B、C、F
解説：
According to the VMware NSX 4.x Professional documents and tutorials, an NSX Manager is a standalone appliance that hosts the API services, the management plane, control plane, and policy management. The NSX Manager has three built-in roles: policy, manager, and controller2. The policy role handles the declarative configuration of the system and translates it into desired state for the manager role. The manager role receives and validates the configuration from the policy role and stores it in a distributed persistent database. The manager role also publishes the configuration to the central control plane. The controller role implements the central control plane that computes the network state based on the configuration and topology information3. The other roles (master, cloud, and zookeeper) are not valid NSX Manager roles.
質問 # 46
When a stateful service is enabled for the first lime on a Tier-0 Gateway, what happens on the NSX Edge node'
- A. SR is instantiated and automatically connected with DR.
- B. SR and DR Is instantiated but requites manual connection.
- C. SR and DR doesn't need to be connected to provide any stateful services.
- D. DR Is instantiated and automatically connected with SR.
正解：A
解説：
The answer is
A: SR is instantiated and automatically connected with DR.
SR stands for Service Router and DR stands for Distributed Router. They are components of the NSX Edge node that provide different functions1 The SR is responsible for providing stateful services such as NAT, firewall, load balancing, VPN, and DHCP. The DR is responsible for providing distributed routing and switching between logical segments and the physical network1 When a stateful service is enabled for the first time on a Tier-0 Gateway, the NSX Edge node automatically creates an SR instance and connects it with the existing DR instance. This allows the stateful service to be applied to the traffic that passes through the SR before reaching the DR2 According to the VMware NSX 4.x Professional Exam Guide, understanding the SR and DR components and their functions is one of the exam objectives3 To learn more about the SR and DR components and how they work on the NSX Edge node, you can refer to the following resources:
VMware NSX Documentation: NSX Edge Components 1
VMware NSX 4.x Professional: NSX Edge Architecture
VMware NSX 4.x Professional: NSX Edge Routing
質問 # 47
What are four NSX built-in role-based access control (RBAC) roles? (Choose four.)
- A. Operator
- B. Enterprise Admin
- C. Network Admin
- D. Read
- E. None
- F. Full Access
- G. Auditor
正解：D、E、F、G
解説：
None: No permissions are granted, restricting the user's access entirely.
Read: Grants read-only access, allowing the user to view configurations and settings without making changes.
Auditor: Similar to Read, but typically includes access to audit logs and more detailed viewing permissions for compliance purposes.
Full Access: Grants complete control over all NSX configurations and settings, allowing unrestricted access.
質問 # 48
Which two logical router components span across all transport nodes? (Choose two.)
- A. TIER0_DISTRIBUTED_ROUTER
- B. SERVICE_ROUTER_TIER0
- C. DISTRIBUTED_ROUTER_TIER0
- D. SERVICE_ROUTER_TIER1
- E. DISTRIBUTED_ROUTER_TIER1
正解：A、E
解説：
TIER0_DISTRIBUTED_ROUTER: The Tier-0 Distributed Router spans all transport nodes, providing distributed routing capabilities across the NSX environment at the Tier-0 level.
DISTRIBUTED_ROUTER_TIER1: Similarly, the Tier-1 Distributed Router spans all transport nodes, enabling distributed routing at the Tier-1 level, which allows routing functions to occur closer to the workload VMs across the transport nodes.
質問 # 49
Which two of the following parameters are required for deploying the NSX Application Platform?
(Choose two.)
- A. Interface Service Name
- B. Upload Kubernetes Configuration File
- C. Interface Name
- D. Cluster Format Type
- E. Upload XML File
正解：B、E
解説：
Cluster Format Type: This parameter specifies the type of cluster format that will be used for the NSX Application Platform deployment.
Upload Kubernetes Configuration File: NSX Application Platform requires a Kubernetes environment, and the configuration file for Kubernetes must be uploaded to facilitate the deployment.
質問 # 50
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. debug
- B. tcpdump
- C. tcpconfig
- D. ifconfig
正解：D
解説：
The ifconfig command is used to display the network configuration of interfaces, including the Tunnel Endpoint (TEP) IP on a bare metal transport node. This command provides details about IP addresses, subnet masks, and other network settings for each interface on the node.
質問 # 51
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?
- A. Layer 2 VPN
- B. Layer 2 bridge
- C. Layer 3 route
- D. Layer 2 broadcast domain
正解：D
解説：
An overlay segment is a logical construct that provides Layer 2 connectivity between virtual machines that are attached to it. An overlay segment can span multiple hosts and can be extended across different subnets or locations using Geneve encapsulation3. Therefore, two virtual machines on the same overlay segment belong to the same Layer 2 broadcast domain, which means they can communicate with each other using their MAC addresses without requiring any routing. The other options are incorrect because they involve Layer 3 or higher network boundaries, which require routing or tunneling to connect different segments.
Reference: VMware NSX Documentation
質問 # 52
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged.
What could cause this issue?
- A. Distributed Firewall Rule logging is not enabled.
- B. Syslog is not configured on the NSX Manager.
- C. Syslog is not configured on the ESXi transport node.
- D. Zero Trust Security is not enabled.
正解：A
解説：
If Distributed Firewall Rule hit counts are not being logged, it is likely because Distributed Firewall Rule logging is not enabled. For hit counts to appear in the logs, logging must be explicitly enabled on each firewall rule where tracking is required. Without enabling logging at the rule level, no hit count information will be recorded in syslog.
質問 # 53
An administrator needs to download the support bundle for NSX Manager.
Where does the administrator download the log bundle from?
- A. System > Settings > Support Bundle
- B. System > Settings
- C. System > Support Bundle
- D. System > Utilities > Tools
正解：C
解説：
https://docs.vmware.com/en/VMware-NSX/4.1/nsx-application-platform/GUID-50FB1A3F-07D8-4125-
9252-DB05C28BE7E1.html: Procedure From your browser, log in with Enterprise Admin privileges to an NSX Manager at https://<nsx-manager-ip-address>. Navigate to System > Support Bundle. In the Request Bundle tab, select NSX Application Platform from the Type drop-down menu.
質問 # 54
Match the NSX Intelligence recommendations with their correct purpose.
正解：
解説：
質問 # 55
Which two statements are correct about East-West Malware Prevention? (Choose two.)
- A. An agent must be installed on every NSX Edge node.
- B. An agent must be installed on every ESXi host.
- C. NSX Edge nodes must have Internet access.
- D. A SVM is deployed on every ESXi host.
- E. NSX Application Platform must have Internet access.
正解：D、E
質問 # 56
How is the RouterLink port created between a Tier-1 Gateway and Tler-0 Gateway?
- A. Manually create a Logical Switch and connect to bother Tler-1 and Tier-0 Gateways.
- B. Manually create a Segment and connect to both Titrr-1 and Tier-0 Gateways.
- C. Automatically created when Tler-1 is created.
- D. Automatically created when Tier-t Is connected with Tier-0 from NSX UI.
正解：D
解説：
According to the VMware NSX 4.x Professional documents and tutorials, a RouterLink port is a logical port that connects a Tier-1 gateway to a Tier-0 gateway. This port is automatically created when a Tier-1 gateway is associated with a Tier-0 gateway from the NSX UI or API. The RouterLink port enables routing between the two gateways and carries all the routing protocols and traffic. There is no need to manually create a logical switch or segment for this purpose1.
質問 # 57
......
無料2V0-41.24別格な問題集をダウンロード：https://www.passtest.jp/VMware/2V0-41.24-shiken.html
2V0-41.24問題集で2025年最新のVMware試験問題：https://drive.google.com/open?id=1Eamuau-Wb1osG7HJMoUzKiRsfT0zMrdI