2026年01月本日更新された250-587試験問題集PDF試験エンジン無料！
こちらには最新版の250-587リアル試験解答！
質問 # 100
A DLP administrator needs to improve the reporting performance of the Symantec Data Loss Prevent deployment by archiving incidents. What happens to incidents as a result of using the Incident Archive Flag feature?
- A. they are moved to the archive table
- B. they are moved to the archive database
- C. they are moved from reporting status
- D. they are moved to offline storage
正解：C
質問 # 101
Which structures are parts of the Cross-platform Data Sharing (CDS) format?
- A. A public region
- B. A private region
- C. An Operating System-reserved area
- D. A directory area
- E. A Bad Block Relocation Area
正解：A、B、C
質問 # 102
You are the administrator for the Veritas Storage Foundation. Using Veritas Volume Manager, you want to migrate an internal boot disk to a SAN boot disk. Given the following steps:
1. Add the target SAN disk to the boot disk group.
2. Create a mirror of the root disk on the target disk.
3. Verify that the Hardware Compatibility List for the target SAN disk being supported for SAN booting.
4. Boot from the mirror disk to verify that the system is bootable.
What are the sequential steps you need to follow to accomplish this?
- A. 3,1,4,2
- B. 2,3,1,4
- C. 4,2,1,3
- D. 4,1,2,3
正解：B
質問 # 103
You are planning a relayout for a 10GB RAID-5 volume with a RAID-5 log to a stripe-mirror configuration. Dirty-region logging is indicated by the volume's size. How would your plan to address the logs?
- A. Relayout will remove log plexes from the volume, but the DRL must be created after relayout is complete.
- B. Remove the RAID-5 log and create a DRL prior to the relayout operation.
- C. The RAID-5 log should be removed prior to the relayout and after the relayout completes, the DRL should be created separately.
- D. Use the "convertlogs" option of vxassist to cause the relayout job to convert the log plexes.
正解：C
質問 # 104
You have designed a tiered storage environment using ISP volumes, created the disk group that will be used to hold the tiered volumes, and created the storage pool in the disk group. You are now ready to install the template definition file in the ISP configuration database that you have created. What should you do next?
- A. Use the vxdisk command to install your template definition file in the ISP configuration database.
- B. Use the vxtemplate command to install your template definition file in the ISP configuration database.
- C. Use the vxvset command to install your template definition file in the ISP configuration database.
- D. Use the vxassist command to install your template definition file in the ISP configuration database.
正解：B
質問 # 105
You are working on Storage foundation for DB2. You create a file system and you want to mount the file system to enable a Quick I/O. However, you are not able to mount the file system. What could be a probable cause? (Each correct answer presents part of the solution. Select two.)
- A. The Quick I/O is not licensed.
- B. You are not logged in as a root user.
- C. The file system is read-only.
- D. The mount point path is not an absolute path name.
正解：B、D
質問 # 106
An incident responder needs to change the status of an incident to 'Escalate and Notify'. Which two places in the user interface can this Smart Response rule be invoked? (Select two.)
- A. Response Rules page
- B. Incident Snapshot
- C. Incident Summary
- D. Incident List
- E. Policy page
正解：B、D
質問 # 107
Which two actions should an organization take when deploying Endpoint Prevent according to Symantec best practices? (Select two.)
- A. test the agent on a variety of end-user images
- B. enable monitoring of many destinations and protocols simultaneously
- C. enable monitoring of the local file system
- D. delete the pre-defined filters and create its own
- E. configure, test, and tune filters
正解：A、E
質問 # 108
You are administering the Volume Manager in Cluster environment in the datacenter showing a type of write failure on a slave node. You are not able to view the write failure occurred to other nodes in the cluster. What will be the cluster behavior under the local disk detach policy? (Each correct answer presents part of the solution.) (Select two.)
- A. I/O is stopped for the node that first saw the failure.
- B. Application using the volume is also notified about the failure.
- C. Slave node continues to perform I/O operation from and to the volume.
- D. Cluster Management software moves the application to a live node.
正解：A、B
質問 # 109
You have a customer who has set up a 5 GB full-size instant snapshot volume on one of his file servers. The data replicated into the snapshot is a combination of code and content elements, which serves as a rapid recovery mechanism in case of a corruption in a new build installed on the server. The customer tells you that the snapshot is working correctly, but that the time it takes to refresh the snapshot is unusually longer than expected. The customer is expecting you to resolve this problem. How should you resolve this problem?
- A. Use vxassist addlog logtype=dco to enable FastResync on the volume
- B. Recreate the snapshot as a space-optimized instant snapshot
- C. Recreate the snapshot as a traditional third-mirror break-off snapshot
- D. Use "vxsnap prepare" on the source volume, then remove and recreate the snapshot
正解：D
質問 # 110
A file system encounters an error during VxVM operations. The error "VxVM vxio WARMINIG V-5-0-144 Double failure condition detected on RAID-5 volume" is displayed in the file system. How should you resolve this error?
- A. By rebooting the computer.
- B. By creating a new log plex and attaching it with the volume to restore RAID-5 logging to a RAID-5 volume.
- C. By correcting the hardware failure and recovering the volume using the vxrecover command.
- D. By checking the underlying hardware to recover the desired path.
正解：C
質問 # 111
Which two methods should an administrator use to exclude emails going to partner.com and all traffic going to a specific subnet? (Select two.)
- A. Sender/User Matches pattern
- B. L7 sender filter
- C. L7 recipient filter
- D. Protocol filter
- E. IP filter
正解：C、E
質問 # 112
While working with Veritas Storage Foundation for Oracle, you execute the command set #vxtunefs -s -o qui_cache_enable=1 /db01. What will be the output of this command?
- A. It will make the Cached Quick I/O system setting persistent across reboots.
- B. It will create the Cached Quick I/O.
- C. It will determine the current caching state of the file system.
- D. It will enable the Cached Quick I/O.
正解：D
質問 # 113
You work in a Server Operations Center (SOC) with other administrators monitoring VxVM background tasks after you initiate them. You need to set up a VxVM task so that these SOC administrators can track your background tasks against the change control documentation. What would you do address this requirement?
- A. Use the "-n" flag to associate the task with the change control number.
- B. Use the vxtask label command to mark the task with the change control number.
- C. Use the vxtask tag command to associate the task id with the change control number.
- D. Use the "-t" flag to mark the task with the change control number.
正解：D
質問 # 114
A network administrator needs to be notified if someone attempts to tamper with or shut down the VPN connection on an iPad or iPhone. Which product should the administrator use to configure the notification alert?
- A. Network Prevent
- B. Mobile Email Monitor
- C. Mobile Device Management
- D. Mobile Prevent
正解：C
質問 # 115
The administrator determines that \SymantecDLP\Protect\Incidents folder on Enforce contains .BAD files dated today while other .IDC files are flowing in and out of the \Incidents directory. Only .IDC files larger than 1MB are turning to .BAD. What could be causing only incident data smaller than 1MB to persist while incidents that are larger than 1MB change to .BAD files?
- A. detection server has excessive filereader restarts
- B. Enforce hard drive is out of free disk space
- C. corrupted policy was deployed
- D. tablespace is almost full
正解：D
質問 # 116
Which response rule action will be ignored when using an Exact Data Matching (EDM) policy?
- A. Endpoint Prevent: Notify
- B. All: Send Email Notification
- C. Network Protect: Copy File
- D. Network Prevent: Remove HTTP/HTTPS Content
正解：A
質問 # 117
You have already removed a mirror from volume using vxassist command. After removing a mirror you will be left with only one mirror. However, you need to have at least two mirrors on a volume. What should you do to resolve this situation?
- A. Change the rule to allow the mirror to be removed
- B. Use the -f option with the vxdg command
- C. Use the -b option with the vxassist command
- D. The rule will not allow you to complete this operation.
正解：B
質問 # 118
......
材料 From:
- 2026年最新の 250-587試験問題集で（PDFとテストエンジン）無料提供：https://www.passtest.jp/Symantec/250-587-shiken.html
- 2026年最新の250-587のPDF試験問題集で無料提供：https://drive.google.com/open?id=1AfO08z4t41mm4LAmOjXM2TEka7GdOztX
無料材料を提供しております！お客様の全試験合格を助けます！