[2026年04月] 確実合格する有効な方法 Network Appliance 試験問題集 NS0-164 試験学習ガイド [Q17-Q41]

Share

[2026年04月] 確実合格する有効な方法Network Appliance試験問題集でNS0-164試験学習ガイド

NS0-164問題集とNetApp Data Administrator ONTAP Professional Examトレーニングコースでお客様の合格を楽にさせる学習合格試験問題!

質問 # 17
Which statement describes the results of the snapmirror resync command?

  • A. Resynchronization. update the snapshot on the destination filer.
  • B. Resynchronization made. cause the loss of all data written to the destination after the original base snapshot was
  • C. Resynchronization finds the newest common snapshot shared by the two volumes or qtrees, and removes all newer information on the storage appliance on which the command is run.
  • D. Resynchronization. update the snapshot on the source filer.

正解:C


質問 # 18
XML-files in /etc/stats/preset are used together with the sysstat command to customize the output.

  • A. True
  • B. False

正解:B


質問 # 19
Which two default HA features work together to reduce and avoid client outages on an ONTAP FAS cluster? (Choose two.)

  • A. Automatic takeover
  • B. Automatic failover
  • C. Automatic giveback
  • D. Automatic SAN LIF migration

正解:A、C


質問 # 20
The snapvault restore command is ran on the:

  • A. Primary system to pull data from the secondary system
  • B. Secondary system to push data to the primary storage appliance
  • C. Secondary system to push data to Open System
  • D. Primary Open System to pull data from the secondary system

正解:A


質問 # 21
An administrator wants to provide isolation from connected hosts to the same FCP LUN. Which two features accomplish this request? (Choose two.)

  • A. Broadcast Domains
  • B. Portsets
  • C. IPSpaces
  • D. Selective LUN Mapping

正解:B、D


質問 # 22
Which two tools should an administrator use to manage NVMe namespaces? (Choose two.)

  • A. ONTAP CLI
  • B. System Manager
  • C. SAN Host Tools
  • D. Config Advisor

正解:A、B


質問 # 23
When you are setting up SnapMirror, which one of the following is not a replication pre-requisite?

  • A. The capacity of the SnapMirror destination must be greater than or equal to the capacity of the source.
  • B. SnapMirror must be licensed for each storage appliance.
  • C. If you are replicating a volume, you must create a restricted volume to be used as the SnapMirror destination volume.
  • D. The source volume must be offline.

正解:D


質問 # 24
Which command allows yon to access the other nodes console after a takeover has occurred?

  • A. toggle
  • B. switch
  • C. partner
  • D. takeover

正解:C


質問 # 25
Which two default HA features work together to reduce and avoid client outages on an ONTAP FAS cluster?
(Choose two.)

  • A. Automatic takeover
  • B. Automatic failover
  • C. Automatic giveback
  • D. Automatic SAN LIF migration

正解:A、C


質問 # 26
When using MetroCluster, identify two methods for restricting access to the disaster site node. (Choose 2)

  • A. Use the cfgiveback-f command.
  • B. Turn off power to the disaster site node.
  • C. Use the cf forcetakeover-d command.
  • D. Use manual fencing

正解:B、D


質問 # 27
The required hardware to add SyncMirror to an existing Clustered Failover system consists of:

  • A. Disk shelves and termination switches
  • B. Disk shelves and cluster interconnect
  • C. Disk shelves and cabling
  • D. Disk shelves, adapters and cabling

正解:D


質問 # 28
The OSSV agent on the primary system listens to TCP port 10000 for all SnapVault communications.

  • A. True
  • B. False

正解:B


質問 # 29
Each storage appliance in a cluster must have network access to the

  • A. same collection of subnets.
  • B. same administration host.
  • C. Internet.
  • D. cluster partner.

正解:A


質問 # 30
Which two types of Restore does Cloud Backup allow? (Choose two.)

  • A. Cloud Volumes ONTAP (CVO)
  • B. Windows 2019 server
  • C. E-Series system
  • D. AFF ONTAP system
  • E. StorageGRID

正解:A、D


質問 # 31
Which two statements are true about ONTAP? (Choose two).

  • A. ONTAP can only be deployed on specific architectures.
  • B. ONTAP supports a limited set of application.
  • C. ONTAP offers flexible options such as SSDs, HDDs, and public clouds.
  • D. ONTAP supports scalability with additional storage drives and controllers.

正解:C、D


質問 # 32
What predefined SVM role provides management for NDMP operations?

  • A. wsadmin-voluma
  • B. vsadmin-backup
  • C. vsadmin-readonly
  • D. vsadmin-protocol

正解:B


質問 # 33
Which zoning method does NetApp recommend?

  • A. single-target worldwide port name (WWPN) zoning.
  • B. single-initiator worldwide node name (WWNN) zoning.
  • C. single-initiator, multiple target, worldwide port name (WWPN) zoning.
  • D. single-target worldwide node name (WWNN) zoning.

正解:C


質問 # 34
What are two logical network components of ONTAP? (Choose two.)

  • A. Interface group
  • B. VLAN
  • C. Network port
  • D. SFP+

正解:A、B


質問 # 35
Which command allows you to access the other nodes console after a takeover has occurred?

  • A. toggle
  • B. switch
  • C. partner
  • D. takeover

正解:C


質問 # 36
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?

  • A. halts after 24 hours of running in degraded mode
  • B. alerts you that there are no 36-Gigabyte disks and wait for one to be inserted
  • C. chooses a 72-Gigabyte disk and right-size it
  • D. chooses a 72-Gigabyte disk and use it as is

正解:C


質問 # 37
Which one of the following commands would you use to rejoin the "mil" volume with the "mir(l)" volume?

  • A. vol minor mil -n mir(l)
  • B. vol mirror mir -c mir(l)
  • C. vol mirror mil -v mir(l)
  • D. vol mirror mir -v mir

正解:C


質問 # 38
When creating an S3 bucket using System Manager, ONTAP uses which default performance service level for an AFF?

  • A. Performance
  • B. Custom
  • C. Value
  • D. Extreme

正解:D


質問 # 39
Which layer in the TCP/IP model identifies the network protocol type of the packet?

  • A. application.
  • B. data link.
  • C. internet.
  • D. transport.

正解:C


質問 # 40
For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex must be identical with regard to____________.

  • A. Mirrored snapshots.
  • B. RAID groups and disk sizes.
  • C. NVRAM.
  • D. NDMP and snapshots.

正解:B


質問 # 41
......

リアル試験問題と解答Network Appliance NS0-164問題集はここに:https://drive.google.com/open?id=19KJpXefoVjrIWp9nbURw8J_SKZgZaJ10

最新 [2026年04月] 効果的な学習法で試験合格できるNS0-164:https://www.passtest.jp/NetworkAppliance/NS0-164-shiken.html