[2026年06月19日] 完全版最新の1z0-1073-25問題集で100%カバー率問題と解答があなたをリアル試験で合格させる
最新1z0-1073-25試験問題集で有効最新の問題集
質問 # 26
Against a Purchase Order quantity of 100, your receiving agent has received 50 items in the receiving type subinventory. Later in the day, 25 items have been put away to inventory. What is the item availability in the Manage Item Quantity UI?
- A. On-Hand: 25, Receiving: 25, Inbound: 50 (*)
- B. On-Hand: 25, Receiving: 25, Inbound: 0
- C. On-Hand: 50, Receiving: 50, Inbound: 0
- D. On-Hand: 25, Receiving: 50, Inbound: 50
正解：A
質問 # 27
An organization uses min-max planned items to generate movement requests automatically where the item's replenishment source is another subinventory. In this case, the min-max process should automatically generate a move request but it doesn't happen.
What is the reason?
- A. Replenishment movement requests is not enabled for status control.
- B. Min-max report was generated at the subinventory level.
- C. The source subinventory was not set at the organization level.
- D. The source subinventory was not set at the item subinventory level.
正解：D
質問 # 28
How do you enable subinventories to receive recalled products in Product Recall Management Solution?
- A. Enable the Product Recall check box in the Manage Subinventories and Locators task.
- B. Add subinventories in Manage Product Recall Lookups.
- C. Add subinventories in the Manage Recall Parameters task. (*)
- D. Set Subinventory Type to Recall in the Manage Subinventories and Locators task.
正解：C
質問 # 29
In Print Min-Max Planning Report parameters, Demand Cut-Off Date is set to 10-Sep, Current Date to 15-Sep, and the Demand Cut-Off Date Offset is set to 2.What happens when the report is run?
- A. It considers all demand between 10-Sep and 17-Sep.
- B. It considers all demand between 10-Sep and 13-Sep.
- C. It considers all demand on or before 10-Sep.
正解：B
質問 # 30
Inventory organization M1 has:
Nettable Quantity On-hand = 24
Open Supply Quantity = 51 with all supply within the supply cutoff date Open Reserved Sales Order Quantity = 90 with all demand within the cutoff date Open Unreserved Sales Order Quantity = 10 Min-max Minimum Quantity = 100 Min-max Maximum Quantity = 500 Min-max planning report is run for organization level with Yes specified for the Net Reserved Orders parameter.
What will be Total Available Quantity and Reorder Quantity calculated?
- A. Total Available Quantity = 76 Reorder Quantity = 500
- B. Total Available Quantity = - 14 Reorder Quantity = 514
- C. Total Available Quantity = - 14 Reorder Quantity = 500
正解：B
質問 # 31
In which two ways can ownership change for consigned goods from supplier to buyer?
- A. Perform a subinventory transfer.
- B. Create a consumption advice.
- C. Create a transfer to an owned transaction.
- D. Create a transfer to a consigned transaction.
正解：A、C
質問 # 32
SIMULATION
Back-to-Back Supply Creation On-Hand Flow
The back-to-back on-hand available (ATP) flow is the simplest in terms of the number of steps that constitute the flow. This flow occurs where on hand supply is available in the fulfillment warehouse for the ordered back-to-back item at the time of order promising. Because on-hand goods already exist in the form of on hand, Oracle Supply Chain Orchestration directly sends a request to reserve the on hand quantity against the back-to-back sales order. You can ship the sales order immediately after the reservation is created.
The following figure shows the back-to-back supply creation on-hand flow.
正解：
解説：
See the Explanation for the complete solution
Explanation:
Back-to-Back Supply Creation: On-Hand Flow in Oracle Cloud
1. Overview of Back-to-Back On-Hand Flow
The Back-to-Back On-Hand Flow is the simplest and fastest fulfillment method in Oracle Cloud because the required stock is already available in the fulfillment warehouse at the time of sales order entry.
Unlike Buy, Make, or Transfer Flows, no additional supply is created. Instead, Oracle Supply Chain Orchestration (SCO) directly reserves the available inventory against the sales order, making it ready for immediate shipment.
2. Step-by-Step Back-to-Back On-Hand Flow Process
Below is a detailed step-by-step breakdown of the Back-to-Back On-Hand Flow using Oracle Fusion Cloud applications.
Step 1: Enter & Schedule Sales Order
The customer places a sales order in Oracle Order Management.
The system checks inventory availability in Oracle Inventory Cloud.
Oracle Global Order Promising (GOP) determines that the required stock is already available in the fulfillment warehouse.
No procurement, manufacturing, or warehouse transfers are needed.
The sales order is scheduled immediately for fulfillment.
✅ System Action: The system identifies that on-hand stock is available and proceeds to reservation.
Step 2: Reserve Available Inventory
Oracle Supply Chain Orchestration (SCO) reserves the available stock against the back-to-back sales order.
The system ensures that this stock is allocated only to this order, preventing other orders from using it.
✅ System Action: The system reserves the required quantity for the sales order.
Step 3: Ship the Sales Order
The order moves directly to shipping in Oracle Inventory Cloud.
The warehouse team picks, packs, and ships the goods using Oracle Shipping Execution.
An invoice is generated in Oracle Receivables.
The sales order is closed after shipment.
✅ Final Action: The system completes the order and ships it to the customer.
3. Oracle Fusion Cloud Modules Involved in On-Hand Flow
4. Benefits of Back-to-Back On-Hand Flow
✔ Fastest Fulfillment Process - No need for procurement, manufacturing, or transfers.
✔ Minimizes Order Processing Time - Orders can be shipped immediately after reservation.
✔ Eliminates Additional Costs - No purchase orders, work orders, or transfers required.
✔ Ensures Inventory Optimization - Uses available stock efficiently.
✔ Improves Customer Satisfaction - Quick shipping and fulfillment.
5. Real-World Use Case
Scenario: Electronics Retailer Fulfilling a Popular Smartphone Order
A retailer sells Smartphone XYZ and has 100 units in stock at its fulfillment warehouse.
Process Flow:
A customer places an order for 10 units of Smartphone XYZ.
Oracle Global Order Promising (GOP) identifies that stock is available.
Oracle Supply Chain Orchestration (SCO) reserves 10 units against the sales order.
The warehouse team picks, packs, and ships the smartphones.
The customer receives the order, and the system closes the sales order.
✅ Result: The order is fulfilled immediately without additional supply creation.
質問 # 33
In which process does the system automatically select the source of supply, reserve supply until fulfillment and ship to the customer?
- A. Drop Shipment
- B. Back-to-Back
- C. Consigned Inventory
- D. Internal Material Transfer
正解：B
質問 # 34
Your supplier is unable to deliver goods on the promise date against a back-to-back order and updates the promise date on the purchase order schedule to a later date.
How is the change handled on the source side?
- A. Order automatically goes on hold in supply orchestration, and the schedule ship date is adjusted in order management.
- B. Status quo is maintained on the supply order and sales order.
- C. Date Pushed Out exception is generated in supply orchestration, and order management is notified.
正解：C
質問 # 35
Which three sort criteria are available to pick material for a movement request?
- A. Revision (*)
- B. Lot (*)
- C. Subinventory (*)
- D. Serial
正解：A、B、C
質問 # 36
What are two outcomes when a lot expires on an item with lot control enabled?
- A. It remains in inventory and can be transacted.
- B. It is not included in cycle counts.
- C. It cannot be reserved for a date beyond the expiration date.
- D. It is automatically assigned the inactive material status.
正解：A、C
解説：
Plan Inventory Replenishment
質問 # 37
SIMULATION
Back to Back fulfillment
Overview of Back-to-Back Fulfillment
The back-to-back fulfillment process is one in which specific sales order demand triggers supply creation, and a link is established between the sales order and the supply.
Note: Back-to-back flow is currently supported only for discrete manufacturing.
The following figure provides a high-level flow diagram showing the back-to-back supply creation and fulfillment process flow.
Back-to-back fulfillment is where supply is procured and then received at a warehouse only after an order is placed.
The supply is reserved against a sales order until shipping.
This process provides support to create and link supply after a sales order is entered and scheduled, allowing you to reduce your inventory while maintaining the ability to respond to customer demands.
You create supply for a back-to-back order using one or more of the following back-to-back flows:
* Buy: Procurement from an external supplier.
* Make: Production in an internal manufacturing facility (includes in-house manufacturing and contract manufacturing).
* Transfer: Transfer from another warehouse.
* On hand: Reservation of on-hand supply in the fulfillment organization.
Note: For information about back-to-back flows for contract manufacturing, see the Implementing Contract Manufacturing chapter in this guide.
After the supply is received into the fulfillment warehouse, the back-to-back order is ready for shipment to the customer.
正解：
解説：
See the Explanation for the complete solution
Explanation:
Back-to-Back Fulfillment in Oracle Inventory Cloud
Back-to-back fulfillment in Oracle Inventory Cloud is a supply chain process where supply is created only after a sales order is placed. This process links the demand (customer sales order) directly to the supply (procurement, manufacturing, transfer, or existing stock), ensuring efficient inventory management while meeting customer demands. Below is a detailed step-by-step explanation of the back-to-back fulfillment process.
1. Overview of Back-to-Back Fulfillment Process
The back-to-back (B2B) fulfillment process ensures that supply is created only when a customer order is received.
Supply is specifically reserved for the sales order until shipping.
This process helps reduce excess inventory while maintaining responsiveness to customer needs.
It supports four fulfillment strategies: Buy, Make, Transfer, and On Hand Reservation.
Back-to-back fulfillment is mainly used in discrete manufacturing environments.
2. Step-by-Step Back-to-Back Fulfillment Process in Oracle Inventory Cloud The back-to-back fulfillment process consists of the following key steps:
Step 1: Process Sales Order
The sales order is created in Oracle Order Management.
The order is validated for correctness (items, quantities, prices, etc.).
The order is scheduled, and the system checks if on-hand inventory is available.
If no inventory is available, Oracle Supply Chain Orchestration initiates a back-to-back fulfillment request.
Step 2: Determine Supply Sources
Oracle Supply Chain Orchestration (SCO) determines the best supply source based on predefined rules and sourcing strategies.
The system evaluates the following supply options:
Buy: Procurement from an external supplier.
Make: Internal manufacturing or contract manufacturing.
Transfer: Movement of inventory from another warehouse or distribution center.
On Hand: Direct reservation of existing inventory.
Step 3: Create and Manage the Supply Order
A supply order is generated in Oracle Supply Chain Orchestration.
The order is assigned to the appropriate fulfillment method:
Buy Order: A purchase requisition is created in Oracle Procurement Cloud, and the supplier provides the required goods.
Make Order: A work order is created in Oracle Manufacturing Cloud, and production begins.
Transfer Order: A transfer request is initiated in Oracle Inventory Management, moving stock from another warehouse.
On-Hand Reservation: If stock is available, it is reserved against the sales order.
Oracle monitors the progress of the supply order until completion.
Step 4: Receive and Consolidate Supply in Warehouse
Once supply is procured, manufactured, or transferred, it is received in the fulfillment warehouse.
If it is a purchased item, a receipt is created in Oracle Receiving.
If it is a manufactured item, the work order is completed, and inventory is updated.
The system ensures that the received inventory is linked to the original sales order.
Step 5: Ship to Customer
The sales order is released for fulfillment.
A Pick Release process is initiated in Oracle Inventory Cloud to allocate stock.
The order is picked, packed, and shipped using Oracle Shipping Execution.
A shipping confirmation is generated, and an invoice is created in Oracle Receivables.
The sales order is marked as complete, and the supply order is closed.
3. Detailed Explanation of Back-to-Back Fulfillment Flows
1. Buy Flow (Procurement)
If the supply is sourced externally, the system generates a purchase order in Oracle Procurement Cloud.
The supplier delivers the goods, which are received in Oracle Receiving.
The inventory is updated, and the order is prepared for shipment.
The sales order is fulfilled once the goods arrive.
2. Make Flow (Manufacturing)
If the item is manufactured internally, a work order is created in Oracle Manufacturing Cloud.
Production is executed, and the finished product is stored in inventory.
The system reserves the item against the sales order.
The order is fulfilled when the product is available.
3. Transfer Flow (Warehouse Transfer)
If the item is available in another warehouse, a transfer order is generated in Oracle Inventory Cloud.
The inventory is moved to the fulfillment warehouse.
Once received, the inventory is reserved and prepared for shipment.
The sales order is completed upon shipment.
4. On Hand Flow (Inventory Reservation)
If the item is available in stock, the system directly reserves it.
The order moves to the shipping phase without additional procurement or manufacturing steps.
The pick, pack, and ship process is executed, and the order is fulfilled.
4. Key Benefits of Back-to-Back Fulfillment in Oracle Inventory Cloud
✔ Reduced Inventory Holding Costs - Stock is only procured, manufactured, or transferred when needed.
✔ Improved Order Fulfillment Efficiency - Orders are linked directly to supply, reducing delays.
✔ Better Customer Satisfaction - Customers receive products faster with reduced stockouts.
✔ Automated Supply Chain Coordination - Oracle Cloud applications ensure seamless integration between order management, procurement, manufacturing, and inventory.
✔ Flexibility in Sourcing - Users can choose between procurement, manufacturing, transfer, or existing stock to fulfill demand efficiently.
5. Oracle Cloud Modules Involved in Back-to-Back Fulfillment
6. Example Use Case: Back-to-Back Fulfillment in Action
Scenario:
A customer places an order for 100 units of Item XYZ, but there is no stock available in the warehouse.
Solution:
The system checks stock availability and identifies that back-to-back fulfillment is required.
The sourcing rules determine that procurement from an external supplier is the best option.
A purchase requisition is created in Oracle Procurement Cloud.
The supplier delivers the items, and they are received into inventory.
The inventory is reserved against the sales order.
The shipping process is initiated, and the order is delivered to the customer.
The sales order and supply order are closed.
質問 # 38
The interorganization parameter is not set up completely.Shipment numbers are not generated for transfers using direct organization transfer.Your customer has decided to implement dual UOM tracking for an inventory organization.
Which two statements are FALSE about dual UOM tracking?
- A. Dual UOM should be enabled for all items in an inventory organization.
- B. Generally, the secondary UOM is set as the pricing UOM.
- C. The tracking UOM for the items should be set to Primary and Secondary.
- D. During transfers, the system honors UOM conversion at the source organization.
正解：A、D
質問 # 39
What are the functional components of Supply Chain Orchestration? (Choose three)
- A. Order Capturing
- B. Decomposition
- C. Orchestration
- D. Business Services
正解：B、C、D
解説：
Consigned Inventory from a Supplier
質問 # 40
Item A is transacted in lots. Your customer wants to pick more than the requested quantity for Item A during pick slip confirmation.
How can this requirement be achieved?
- A. Enable overpick of Item A in item specification.
- B. By default, confirm pick slip allows you to pick more than the requested quantity for lot-controlled items.
- C. Allow overpick in inventory organization parameters.
正解：A
質問 # 41
Vision Corporation manufactures two products, Air Compressors and Air Filters, in its factory unit. It also provides two services, Electrical Services and Mechanical Services, for its customers. The company submits profit and loss statements for each of its products and services separately.
Vision Corporation is located in the UK and submits its reports using UK Statements of Standard Accounting Practice and Financial Reporting standards.
Which is a suitable enterprise configuration for Vision Corporation?
- A. 2 Business Units, 1 Ledger, and 1 Legal Entity
- B. 1 Business Unit, 1 Ledger, and 1 Legal Entity
- C. 4 Business Units, 1 Ledger, and 1 Legal Entity
正解：C
質問 # 42
......
無料セールまもなく終了！100%有効な1z0-1073-25試験：https://www.passtest.jp/Oracle/1z0-1073-25-shiken.html
検証済み1z0-1073-25試験解答合格確定させる：https://drive.google.com/open?id=1SCreq2_6mBNQBTgzZUXFRMfi4v_ceRsc