2026年08月本日更新されたNCP-EUC試験問題集PDF試験エンジン無料！
こちらには最新版のNCP-EUCリアル試験解答！
質問 # 29
An administrator is asked to configure storage to support four pools of 250 persistent full clone desktops, and an additional five pools of 200 non-persistent desktops.
What is the optimal configuration for this?
- A. One container with compression only and one with compression and deduplication
- B. Five containers with compression and deduplication and four with compression only
- C. Nine containers with Compression Only
- D. One container with Compression, Deduplication, and Erasure Coding
正解：A
解説：
The optimal storage configuration aligns the container settings with the specific I/O patterns of the workload types:
* Non-Persistent Desktops: These are typically linked clones (MCS/Instant Clones) with high write churn and little data commonality in the delta disks. Compression Only is best. Deduplication adds overhead with no benefit.
* Persistent Full Clones: These are full copies of the OS. Because there are hundreds of copies of the same OS files, Deduplication (Capacity or Performance tier) is highly effective at saving space.
Compression is always recommended.
Therefore, creating two separate containers-one configured with Compression Only (for the non- persistent pools) and one with Compression and Deduplication (for the persistent full clone pools)- provides the best balance of performance and capacity efficiency (Option D).
質問 # 30
Refer the exhibit
An administrator is getting complaints from users regarding virtual desktop performance. The user base is a mixture of task workers, knowledge workers, and power users. The administrator suspects there are user Virtual desktops that are consuming resources and are starving the other virtual desktops from performing adequately.
How many virtual desktops are contributing to this issue?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
The CPU usage percentage indicates how much of the allocated CPU resources the virtual desktop is consuming.
A high CPU usage percentage means that the virtual desktop is using a lot of CPU resources, which can affect the performance of other virtual desktops on the same host or cluster.
According to Nutanix best practices, the recommended CPU usage percentage for virtual desktops is less than
80%.
VM-0001 (99%)
VM-0002 (98%)
VM-0003 (97%)
VM-0004 (96%)
VM-0005 (95%)
VM-0010 (85%)
VM-0016 (81%)
These virtual desktops are likely contributing to the performance issue by consuming too much CPU resources and starving other virtual desktops from performing adequately.
質問 # 31
An administrator needs to manage the virtual desktop environment for a small QA group.
Which two requirements would prevent a non-persistent deployment? (Choose two.)
- A. users need to test various peripherals.
- B. users need to test application installation routines.
- C. users need to access web-based applications.
- D. users need to log on and log off frequently.
正解：A、B
解説：
non-persistent VDI is a type of virtual desktop infrastructure (VDI) that does not save any changes made by the user on the virtual machine (VM) across sessions. Non-persistent VDI uses a master image to create and delete VMs as needed.
Therefore, if the administrator needs to manage a non-persistent deployment, they should avoid any requirements that involve modifying or installing applications on the VMs, as those changes would not be saved.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-ncp-euc-v6
質問 # 32
An administrator needs to configure Files for user profiles and data with active-active roaming between two Files deployments.
Which Files component is needed?
- A. VDI Sync
- B. Smart DR
- C. Files DR
- D. Data Consolidation
正解：A
解説：
Comprehensive and Detailed Explanation From Exact Extract of Nutanix End User Computing documents:
According to the Nutanix Files Guide regarding Data Replication and VDI solutions:
* VDI Sync Functionality: VDI Sync is the specific feature designed to replicate VDI user profiles and data across file servers in different locations (active-active). It ensures that user profile data (like FSLogix or UPM containers) is synchronized in near real-time, allowing users to roam between sites and access their data locally at either location.
* Smart DR distinction: Smart DR (Option C) is primarily a Disaster Recovery solution (Active- Standby) used for share-level replication and failover in the event of an outage. It is not designed for the active-active, bi-directional roaming of user profiles required by the question.
* Use Case: For a distributed VDI environment where a user might log in to Site A today and Site B tomorrow and needs their profile immediately available and writable in both, VDI Sync is the mandatory component.
質問 # 33
An administrator is attempting to enable Active-Active NIC load balancing on a cluster. The operation succeeds on the first node, but fails on the second.
What should the administrator confirm before retrying?
- A. Confirm that all nodes in the cluster have identical physical NICs installed.
- B. Ensure that all physical NICs in the cluster are operating at the same speed
- C. Configure the top-of-rack switch to use Balance-SLB.
- D. Ensure that the top-of-rack switch ports have LACP enabled.
正解：B
解説：
When configuring Link Aggregation Groups (LAG) or Active-Active NIC bonding (such as balance-tcp with LACP) on Nutanix AHV, there is a strict requirement regarding link negotiation. All interfaces in a bond must run at the same speed.
If the second node has physical NICs that have negotiated different speeds (e.g., one link at 10 Gbps and another at 1 Gbps due to a cabling issue or switch misconfiguration), the bond creation command will fail for that specific node. While identical hardware (Option A) is preferred, it is the actual operating speed of the links that determines whether the OVS bond can successfully form.
質問 # 34
Which management console provides different wizard-based deployment or configuration scenarios to publish resources using desktops applications?
- A. Citrix Studio
- B. Prism Element
- C. MMC
- D. Prism Central
正解：A
解説：
Citrix Studio is the primary management console for the Citrix Virtual Apps and Desktops (or Citrix DaaS) site.7 It is explicitly designed with wizards to guide administrators through deployment scenarios, such as creating Machine Catalogs (provisioning VMs) and Delivery Groups.
It is specifically within the Delivery Groups wizard in Citrix Studio that an administrator configures the publishing of resources (such as applications and desktops) and assigns them to users.8 While Prism Central manages the underlying Nutanix infrastructure (VMs, networking), it does not handle the session brokering or the specific definition of "published resources" for the VDI users.
質問 # 35
Which container level storage configuration has the most efficient space savings for full clones?
- A. Deduplication on and Compression off
- B. Deduplication off and Compression on
- C. Deduplication off and Compression off
- D. Deduplication on and Compression on
正解：D
解説：
Comprehensive and Detailed Explanation From Exact Extract of Nutanix End User Computing documents:
According to Nutanix Storage Best Practices for Full Clone VDI:
* Full Clone Characteristics: Full Clones are independent copies of the virtual machine, meaning they contain 100% duplicate data (OS, binaries, applications) across every VM in the pool.
* Deduplication Benefit: Because the data is identical across all clones, enabling Deduplication (specifically Capacity Tier Deduplication) provides massive space savings by eliminating these redundant blocks. Nutanix documentation explicitly recommends Deduplication for "Full Clones" and
"Persistent Desktops".
* Compression Synergy: Compression (Inline) is recommended for all workloads. Combining Deduplication (to remove duplicate blocks) with Compression (to shrink the unique blocks) yields the
"most efficient space savings" possible for this specific workload type.
* Contrast: For Linked Clones (which already share a base disk), Deduplication is turned off (Answer C), but for Full Clones, Answer A is the standard best practice.
質問 # 36
A company has non-persistent workloads provisioned with Citrix Machine Creation Services (MCS). The administrator needs to utilize these workloads on their Nutanix environment. Moreover, the administrator would like to deploy many VMs in the future.
In addition to converting the base images to Nutanix AHV, what should the administrator provision to accomplish this task?
- A. New catalogs on AHV with the converted VMs
- B. New cloned images on AHV with the converted image
- C. New cloned images on AHV with the converted VMs
- D. New catalogs on AHV with the converted image
正解：D
解説：
In the context of migrating or setting up Citrix MCS workloads on Nutanix AHV, the workflow relies on the Machine Catalog as the provisioning unit.4 After the administrator converts the base image (Master Image) to the Nutanix AHV format, the correct procedure to deploy "many VMs" (non-persistent pooled workloads) is to create a New Machine Catalog within Citrix Studio.5 During this creation process, the administrator selects the converted image (or a snapshot of it) as the template source.6 MCS then utilizes this single image to clone and provision the multiple non-persistent VMs requested. Therefore, provisioning "New catalogs on AHV with the converted image" is the accurate description of the required task.
質問 # 37
An administrator suspects that Windows desktop VMs are using less than their configured memory, resulting in wasted cluster resources.
How can an administrator verify if this is true?
- A. Review the capacity runway summary.
- B. Run a NCC health check report.
- C. View the over-provisioned VMs list.
- D. Use Task Manager on each desktop VM.
正解：C
解説：
Nutanix Prism Central includes Behavioral Learning and Efficiency reporting tools designed to identify inefficient resource usage.7 To verify if VMs are "using less than their configured memory" (wasted resources), the administrator should view the Over-provisioned VMs list within the Efficiency widget. Nutanix defines an "Over-provisioned VM" as one that is sized with more resources (CPU/Memory) than it actually consumes based on historical performance data.8 This list explicitly identifies these VMs, allowing the administrator to right-size them and reclaim cluster resources, whereas Task Manager (Option A) is manual/individual, and Capacity Runway (Option D) focuses on global cluster storage/resource exhaustion time rather than individual VM efficiency.
質問 # 38
An administrator has been provided additional business requirements for the newly formed business continuity plan. Objectives include the following:
* Seamless failover
* Retaining IPs
* Failover to a DRaas
Which Nutanix provided platform which the administrator choose?
- A. NC2 on Azure
- B. NC2 0n AWS
- C. Xi Leap
- D. Leap DR
正解：C
解説：
A cloud-based DR service that allows customers to protect their Nutanix workloads in a Nutanix-owned cloud platform6. Xi Leap eliminates the need for multiple products and provides end-to-end security, automation, and SLA compliance6.
質問 # 39
A company is using Citrix for virtual desktops on Nutanix with AHV. The studio has 10,000 users who will be connecting to this infrastructure and have deployed a dedicated Files cluster for holding the user home shares.
Since this is a dedicated cluster with dual Intel 6242 28 GHz 16 Core processors and 192GB of RAM, what should be done for the FSVM and CVM configuration to allow for optimal performance?
- A. Leave the CVM RAM at 32GB and increase the FSVM RAM to 96GB.
- B. Increase the CVM RAM to 64GB and the FSVM RAM to 96GB.
- C. Increase the CVM vCPUs to 16 and the FSW vCPUs to 12.
- D. Leave the CVM vCPUs et 12 and increase the FSVM vCPUs to 8,
正解：A
解説：
https://portal.nutanix.com/page/documents/solutions/details?targetId=TN-2041-Nutanix-Files:file-server-virtual-
https://next.nutanix.com/files-storage-71/command-line-access-to-nutanix-file-server-vm-fsvm-via-ssh-nutanix-f The file server VM (FSVM) is a virtual machine that runs on Nutanix Files and provides file services such as SMB shares and NFS exports. The FSVM is based on CentOS and incorporates all the security and hardening that goes into the Nutanix Controller VM (CVM)2. The CVM is a virtual machine that runs on each node of a Nutanix cluster and provides storage management, data protection, cluster coordination, and other services3.
The FSVMs have some default configuration settings that can be changed depending on your workload requirements. For example, you can change the number of vCPUs, RAM, network interfaces, or disk size of an FSVM2. However, you should not change these settings without consulting Nutanix Support first.
One of the factors that affects the performance of an FSVM is its memory allocation. The more memory an FSVM has, the more cache it can use for file operations. This can improve the throughput and latency of file serving workloads4. Therefore, increasing the FSVM RAM to 96GB can help optimize its performance for a large number of users.
質問 # 40
An administrator manages a Nutanix cluster that hosts Omnissa Horizon virtual desktops.
The administrator is troubleshooting a desktop provisioning problem where Omnissa Horizon virtual desktops are not joining the domain automatically on creation. The administrator is able to log onto the virtual desktop console and join the domain using their own account.
What could the problem be?
- A. The domain join account needs to be a member of the Schema Admins group.
- B. The DNS client configuration is incorrect on the virtual desktop.
- C. A domain join PowerShell start up script needs to be defined on the virtual desktops.
- D. The domain join account needs specific delegated permissions the target OU.
正解：D
解説：
When provisioning automated pools (Instant Clones or Linked Clones) in Omnissa Horizon (formerly VMware Horizon), the domain join operation is performed by a specified service account. If this process fails automatically but works manually with an administrator's account, it indicates a permissions issue for that service account, not a general network or DNS failure.
The service account does not require high-level privileges like Domain Admin or Schema Admin. Instead, it requires specific delegated permissions on the Target Organizational Unit (OU) where the new computer objects are created. These permissions include "Create Computer Objects," "Delete Computer Objects,"
"Write All Properties," and "Reset Password." If these delegations are missing, the automated domain join will fail.
質問 # 41
What should the administrator use when creating a Windows 10 gold image using Calm for Citrix MCS persistent desktops?
- A. Snapshot of Citrix optimized Windows 10 image.
- B. VMware optimized Windows 10 image.
- C. Sysprepped Microsoft Windows 10 image
- D. Microsoft downloaded Windows 10 ISO image.
正解：A
解説：
A snapshot is a point-in-time copy of a virtual machine that can be used as a template for creating new machines. A Citrix optimized Windows 10 image is a Windows 10 image that has been configured with best practices and optimizations for Citrix Virtual Apps and Desktops.
Using a snapshot of a Citrix optimized Windows 10 image can ensure that the persistent desktops have consistent performance, security, and user experience. It can also simplify the image management process by allowing you to update the snapshot with new patches or applications using Calm.
Calm is a tool that automates application lifecycle management across different environments. Calm can integrate with Citrix MCS to create, update, and delete virtual machines based on blueprints that define the configuration and dependencies of an application.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certifi
質問 # 42
Refer the exhibit.
Which statement is true?
- A. Five instances are running Tuesday and Thursday from 09:00 am till 05:00 pm.
- B. Five instances are running on every Weekday from 09:00am till 05:00 pm
- C. Five instances are running Tuesday and Thursday from 00:00am till 24:00 pm
- D. Five instances are running on every Weekday fro, 00:00am till 24:00 pm
正解：C
解説：
The schedule has two rows: one for Weekdays and one for Tuesday and Thursday.
Each row has a column for Instances, which indicates how many instances should be running during that time range.
Each row also has a column for Time Range, which indicates the start and end time for running the instances.
The time range is expressed in 24-hour format, where 00:00 means midnight and 24:00 means midnight of the next day.
According to the exhibit, the schedule Dev has the following settings:
* On Weekdays (Monday to Friday), five instances are running from 09:00 am till 05:00 pm.
* On Tuesday and Thursday, five instances are running from 00:00 am till 24:00 pm.
質問 # 43
An administrator needs to deploy virtual desktops to a Hyper-V Nutanix cluster with writable differencing disks, The administrator will use read only master image with clones that link back to the image.
Which native feature will the cluster use to complete this task?
- A. Oplog
- B. VM Flash Mode
- C. Compression
- D. Shadow Clones
正解：D
解説：
The feature in Nutanix that would be used to complete the task of deploying virtual desktops to a Hyper-V Nutanix cluster with writable differencing disks using a read-only master image with clones that link back to the image is Shadow Clones. Shadow Clones allow for the creation of a snapshot or a clone of a VM that uses the original VM's disks as read-only, and only writes changes to a separate differencing disk. This is useful when deploying virtual desktops as it can reduce storage requirements and improve performance.
Nutanix shadow clones are a feature that enables distributed caching of virtual disks (vDisks) that are in a multi-reader scenario. This can improve performance and reduce network traffic for scenarios such as VDI or private clone boot storms1
質問 # 44
Refer to the exhibit.
An administrator navigates to Prism Central VM (PCVM) by DNS
name and receives the message displayed. When browsing directly to an IP address of any of the PCVMs or the virtual IP, the login screen is immediately displayed.
Which would cause this behavior?
- A. This browser is not supported.
- B. This browser doesn't trust the issuing Certificate Authority.
- C. Certificate was only applied to one PCVM.
- D. Certificate doesn't include the Subject Alternative Name.
正解：B
解説：
The error code displayed in the exhibit, NET::ERR_CERT_AUTHORITY_INVALID, explicitly indicates that the browser does not trust the Certificate Authority (CA) that signed the SSL certificate presented by Prism Central.
According to the Nutanix Security Guide and Prism Central documentation regarding Security Certificate Management:
* By default, Nutanix clusters and Prism Central use a self-signed certificate.
* When an administrator accesses Prism via a web browser using these default certificates, the browser will display a security warning (such as "Your connection is not private") because the self-signed certificate authority is not in the browser's or operating system's Trusted Root Certification Authorities store.
* To resolve this behavior, the administrator must either import the self-signed root certificate into the client's trusted store or replace the default certificate with one signed by a commercial or internal CA that the browser already trusts.
If the issue were related to the hostname missing (Option C), the error code would be NET::
ERR_CERT_COMMON_NAME_INVALID. Since the error is specifically "Authority Invalid," the cause is the lack of trust in the issuer (CA).
質問 # 45
Refer to the exhibit.
An administrator was made aware that user sessions are being randomly disconnected. and their applications and files being terminated. When the user launches new virtual desktop session, they are authenticated to a fresh desktop. upon investigating. the administrator discovers that most users log in at 9:00 AM and are active through 2:00 PM.
What configuration setting must be modified in order to resolve this issue?
- A. Idle timeout
- B. Max session duration
- C. Reservation timeout
- D. user inactivity timeout
正解：B
解説：
Nutanix Frame has several session settings that can affect the user experience and resource utilization. One of these settings is Max session duration, which defines how long a user can stay connected to a Frame session before it is automatically terminated1. If this setting is too low, users might experience random disconnections and lose their applications and files. Therefore, the configuration setting that must be modified in order to resolve this issue is A (Max session duration).
質問 # 46
Refer to the exhibit.
An administrator is configuring a virtual desktop gold master image with P40 NVIDIA vGPU. upon trying to add a vCPU assignment in Prism Element, the administrator noticed that it is not selectable and cannot proceed.
Which two actions are correct steps to resolve this issue? (Choose two.)
- A. Check if ECC Mode is turned on by running nvdia-smi -q | grep "ECC Mode" -A2
- B. Install the NVIDIA GPU Manager Driver.
- C. Install the NVIDIA GPU drivers on the Gold Master.
- D. Disable ECC by running nvdia-smi -e 0.
正解：A、D
解説：
ECC (Error Correcting Code) mode is a feature of some NVIDIA GPUs that provides error detection and correction for memory errors. However, ECC mode can interfere with vGPU functionality and prevent vGPU-enabled VMs from being created or started1. Therefore, two correct steps to resolve this issue are B (Disable ECC by running nvdia-smi -e 0) and D (Check if ECC Mode is turned on by running nvdia-smi -q | grep "ECC Mode" -A2).
https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LKjOCAW
質問 # 47
A company has decided to use Citrix Optimizer tool to prepare their gold image.
Which two actions does Optimizer take to improve the gold image creation process? (Choose two.)
- A. Optimizes storage capacity usage.
- B. uses built-in templates to perform optimizations.
- C. Applies best practices for securing virtual desktops.
- D. Optimizes user environments for better performance
正解：B、D
解説：
The Citrix Optimizer tool is used to prepare Windows operating system images for use in a virtual desktop environment. Some of the actions that it takes to improve the gold image creation process include:
* Optimizes user environments for better performance: The tool removes unnecessary or redundant services, features, and applications from the image, which can improve performance and reduce resource usage.
* Uses built-in templates to perform optimizations: The tool comes with pre-configured templates that are optimized for specific environments, such as virtual desktops or server workloads. These templates can be customized based on the specific needs of the organization.
https://support.citrix.com/article/CTX224676/citrix-optimizer-tool
https://docs.citrix.com/en-us/workspace-environment-management/service/using-environment-management
/system-optimization/citrix-optimizer.html
質問 # 48
An administrator is using a mix of full clones and nan-persistent desktops deployed via Citrix MCS on a three-node cluster. The full clone and non-persistent desktops are managed using separate storage containers.
Which two Storage Efficiency features will provide better storage efficiency and performance improvement? (Choose two.)
- A. Erasure Coding
- B. Deduplication
- C. Compression
- D. RDMA
正解：B、C
解説：
Storage Efficiency features that will provide better storage efficiency and performance improvement for a mix of full clones and non-persistent desktops deployed via Citrix MCS on a three-node cluster are Compression and Deduplication. Compression is a technology that reduces the size of data blocks by removing redundant information. Deduplication is a technology that eliminates duplicate blocks of data and reduces storage consumption. Both Compression and Deduplication can be enabled on a per-container basis and can provide significant savings for Citrix virtual desktop deployments that use cloning technologies such as MCS2.
質問 # 49
......
材料 From:
- 2026年最新の NCP-EUC試験問題集で（PDFとテストエンジン）無料提供：https://www.passtest.jp/Nutanix/NCP-EUC-shiken.html
- 2026年最新のNCP-EUCのPDF試験問題集で無料提供：https://drive.google.com/open?id=1oK5VIsAscHafhkpBWKGB690cmVVt0Cy4
無料材料を提供しております！お客様の全試験合格を助けます！