CMRP無料試験学習ガイド！（更新された192問あります)
CMRP問題集にはCMRP Certification認証済み試験問題と解答
質問 # 15
MTTR
- A. Time-Based PMs should be less than 20% of all PMs.(T/F)
- B. How soon can we restore an asset is measured by:
- C. Utilization of assets in a world-class facility should be about 85%. (T/F)
- D. Mean Time To Repair or Replace (MTTR) Formula
正解：B
質問 # 16
The metric is a measure of equipment or asset performance based on actual availability, performance efficiency, and quality of product or output when the asset is scheduled to operate
- A. Mean Time Between Maintenance (MTBM)
- B. Overall Equipment Effectiveness (OEE)
- C. Mean Time To Repair or Replace (MTTR)
- D. Preventive Maintenance Hours
正解：B
質問 # 17
O&M
- A. TPM is a type of maintenance performed by the operators. (T/F)
- B. A rule of thumb is that, on average, an experienced planner can plan work for how many
- C. It should be common practice for operators to perform PMs. (T/F)
- D. Which phase of the asset life cycle has the highest cost?
- E. craft people?
正解：E
質問 # 18
In what order should you consider tasks to defend against failure?
- A. Predictive testing, periodic replacement, periodic rebuild
- B. Predictive testing, periodic rebuild, periodic replacement
- C. Periodic rebuild, periodic replacement, predictive testing
- D. Periodic replacement, periodic rebuild, predictive testing
正解：B
質問 # 19
During design
- A. The objective of RCM is to preserve functions. (T/F)
- B. Most of the maintenance costs become fixed at what phase?
- C. RCM provides best results when used during what phase?
- D. Which of the following is not a primary objective for implementing a planning process?
正解：B
質問 # 20
The "lower of cost or market" rule for inventories produces the lowest inventory amount when it is applied to:
- A. Total inventory
- B. Each item separately
- C. Random samples
- D. Groups of similar items
正解：B
解説：
The "lower of cost or market' (LCM) rule for inventories produces the lowest inventory amount when it is applied to each item separately. This is because applying the rule to each individual item will yield the lowest price for each item. To the extent that items are aggregated, the inventory valuation will be greater than the LCM.
質問 # 21
What are the three most significant constraints when developing a Maintenance and Reliability-organization?
- A. Culture/Engineering/Budget
- B. Culture/People/Resources
- C. Budget/Operations/People
- D. Engineering/Human/Resources/Budget
正解：B
質問 # 22
There are many ways to improve reliability in the design stage of rotating machinery development. Eight basic ways are: minimize the static loading, minimize dynamic loading, minimize cyclic effects, reduce operating temperatures, remove stress raisers, reduce friction, design for accurate assembly, and isolate corrosive and erosive effects. In regards to applying these principles to a machine that is already in service:
- A. Once a machine is in service, the operating temperature can be lowered without consulting the manufacturer since lowering temperature always extends machine life.
- B. Maintenance and operations teams can improve machinery reliability by considering the same basic things that designers look at when designing reliability into a machine.
- C. Manufacturers have to take all potential operating conditions into account when designing rotating equipment so it's not likely you can improve reliability by changing the operating environment.
- D. There is little that can be done to improve the basic designed-in reliability" of rotating machinery once it has been manufactured and placed in service.
正解：D
質問 # 23
(%) = (Preventive Maintenance Hours ÷ Total Maintenance Labor Hours) × 100
- A. Corrective Maintenance Hours
- B. Preventive Maintenance Hours Formula
- C. Corrective Maintenance Cost Formula
- D. Operational Availability Formula
正解：A
質問 # 24
The degree to which product characteristics meet the product or output
specifications. → Performance Efficiency
- A. True
- B. False
正解：B
質問 # 25
the percentage of total maintenance labor hours used to restore equipment to a functional state after a failure or when failure is imminent
- A. Corrective Maintenance Hours
- B. Preventive Maintenance Cost Formula
- C. TOTAL MAINTENANCE TRAINING COST
- D. Condition Based Maintenance Cost
正解：A
質問 # 26
What is at the heart or core of the Organization for International Standards (ISO) 9000 series documents concerning quality of products and services?
- A. Management of quality assurance processes
- B. How to write quality control documents
- C. Human safety and environmental protection
- D. Procedures, document existence, compliance, and control
正解：D
質問 # 27
Systems Covered by Criticality Analysis (%) = [Number of Critical Systems (for which a criticality analysis has been performed) ÷ Total Number of Systems] ×
100 → Systems Covered by Criticality Analysis
- A. True
- B. False
正解：B
質問 # 28
Under what circumstances are healthcare facilities allowed to write up the costs of property, plant, and equipment in response to current appraisals?
- A. When the appraisal can be demonstrated to be objective
- B. When the value increases by more than 20% in a year
- C. This is almost never allowed.
- D. When the value increases by more than 10% in a year
正解：C
解説：
Companies are almost never allowed to write up the costs of property, plant, and equipment in response to current appraisals. There are very rare exceptions to this rule, but in general businesses are not allowed to use appraisals to manipulate the valuation of assets. This is true regardless of how much the asset is believed to increase in value over a specific amount of time.
質問 # 29
Which of the following is not part of a well-developed training strategy?
- A. Performance reviews
- B. Assessment of current skills
- C. Gap closure plan
- D. Definition of skill requirements
正解：A
質問 # 30
What is the first method that should be considered for controlling noise exposure?
- A. develop noise transmission standards in equipment specifications
- B. reduction of noise transmitted
- C. reduction of noise at its source
- D. personal protective equipment
正解：A
質問 # 31
O&M → RCM Methodology can't be used effectively on new systems
being designed. (t/F)
- A. True
- B. False
正解：A
質問 # 32
When measuring the temperature of an object using a radiometric imager, which two parameters have the greatest effect on accuracy of the temperature reading on the instrument?
- A. Relative humidity and ambient air temperature
- B. Range and span
- C. Aperture and brightness
- D. Emissivity and background temperature
正解：D
質問 # 33
Motor current analysis reveals an unbalanced motor current in excess of 40% when the motor is loaded to over
70% of its nameplate full bad ampere rating. What should you suspect and or what should you do?
- A. Order more on-line tests to confirm the problem, allowing production to continue as long as possible.
- B. Order the motor to be removed from service immediately, since failure due to overheated winding insulation is imminent.
- C. Atthe first opportunity, shut down the motor and have motor circuit analysis performed to locate the cause so it can be corrected.
- D. Do nothing. Current unbalance is normal in a motor that is not fully loaded.
正解：A
質問 # 34
......
実際問題を使ってCMRP問題集で100%無料CMRP試験問題集：https://www.passtest.jp/SMRP/CMRP-shiken.html
実際に出ると確認されたのCMRP試験問題集と解答でCMRP無料更新：https://drive.google.com/open?id=1-og712o1g6tlbjfyoer5PL4Uoz4W1jN9