• ホーム
  • ブログ
  • [Q24-Q45] テスト資料HPE2-T37テストエンジン試験問題はここにある[2024年12月]

[Q24-Q45] テスト資料HPE2-T37テストエンジン試験問題はここにある[2024年12月]

Share

テスト資料HPE2-T37テストエンジン試験問題はここにある[2024年12月]

合格突破受験者シミュレーションされたHPE2-T37試験PDF問題を試そう


HP HPE2-T37 Examは、HPE OneViewソフトウェアを使用するITプロフェッショナルにとって有用な認定試験です。この試験は、候補者がHPE OneViewを管理および構成する知識とスキルをテストすることを目的としており、世界的に認められています。この試験に合格することで、ITプロフェッショナルのキャリアの可能性が向上し、業界で様々な職種に適任となることができます。


HP HPE2-T37試験は、HPE OneViewを使用するITプロフェッショナルの知識やスキルを評価するために設計されています。HPE OneViewは、IT管理者がインフラストラクチャの管理を自動化および簡素化することを可能にする管理プラットフォームです。この試験は、サーバー、ストレージ、およびネットワークを含むHPEインフラストラクチャの管理および展開に責任を持つ個人を対象としています。

 

質問 # 24
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC.
What should you verify before adding HPE Primera to HPE OneView?

  • A. whether the appropriate license for HPE Primera Is available in HPE OneView.
  • B. whether WSAPI service is enabled on HPE Primera array.
  • C. whether there are at least two Fibre Channel networks defined in HPE OneView.
  • D. whether array management using HPE OneView is enabled in SSMC.

正解：B


質問 # 25
Which statement about the presented storage pools is true?

  • A. All storage pools in managed state have a valid HPE OneView license applied
  • B. HPE OneView can be used to configure replication only between managed storage pools
  • C. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
  • D. Storage pools in discovered state can be removed from HPE OneView.

正解：C


質問 # 26
Which operation can be performed using HPE OneView for VMware vCenter Server?

  • A. Create a new VMware cluster within vCenter Server
  • B. Create a new distributed switch for cluster connectivity
  • C. Remove a new node from an existing cluster
  • D. Configure VMware cluster properties tor HA and DRS

正解：A


質問 # 27
Which statement about managing an HPE BiaoeSystem sever is true?

  • A. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
  • B. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
  • C. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
  • D. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section

正解：D


質問 # 28
HOTSPOT
Click the option that will allow you to update the firmware of master and satellite modules.

正解：

解説：


質問 # 29
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

正解：

解説：


質問 # 30
Refer to the exhibit.

Which statement about the storage pools shown is true?

  • A. Both storage pools are in a managed state and can be used for volume provisioning
  • B. Both storage pools have a license applied that enables management of these pools
  • C. Volumes created on the first storage pool cannot use data reduction technologies
  • D. HPE OneView can be used to configure volume replication between these pools

正解：A


質問 # 31
Refer to the exhibit.

Which statement about the logical interconnect shown is true?

  • A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
  • B. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
  • C. The maximum supported number of the internal networks for logical interconnect is configured.
  • D. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

正解：C


質問 # 32
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

  • A. A logical enclosure is created automatically, and it is always based on a single enclosure.
  • B. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
  • C. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
  • D. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.

正解：A


質問 # 33
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?

  • A. Boot volumes can be created on demand and defined in the server profile template.
  • B. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
  • C. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
  • D. An existing volume can be replicated automatically when creating a server profile.

正解：A


質問 # 34
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely.
How should you respond?

  • A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
  • B. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
  • C. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
  • D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.

正解：A

解説：
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
Reference:
https://cdn.cnetcontent.com/syndication/feeds/hp-ent/inline-content/S6/5/0/5029A837AB821E112E962C FFA2E59E065568F85E_source.PDF


質問 # 35
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?

  • A. reset an il_0 management processor to activate the new boot mode for the server
  • B. reset BIOS settings to the defaults so UEFI settings can be applied
  • C. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
  • D. reset BIOS settings to the defaults through the server profile after changing the boot mode

正解：C


質問 # 36
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

  • A. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
  • B. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
  • C. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
  • D. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.

正解：C


質問 # 37
Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

  • A. Auto-zoning functionality will not work until SANs are associated with networks.
  • B. Volume presentation through server profile will work with the discovered state.
  • C. Snapshot functionality will be limited only to the volumes not using these SANs.
  • D. Volume provisioning will only work for arrays that ate accessible through these SANs.

正解：B


質問 # 38
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?

  • A. Not all of the features will be available for HPE ProLiant G7 systems.
  • B. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
  • C. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
  • D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

正解：A


質問 # 39
Which HPE components can be managed using HPE Composer? (select two.)

  • A. HPE Synergy 480 Compute Modules
  • B. HPE Superdome Flex 280
  • C. HPE MSA 2062 Storage Array
  • D. HPE Synergy Virtual Connect SE 32Gb FC Module
  • E. HPE B-series SN6600B Fibre Channel Switch

正解：D、E


質問 # 40
Refer to the exhibit.

Which statement about server connections is true?

  • A. All connections within the server profile are using physical IDs
  • B. LACP on downlinks is configured for Ethernet connection
  • C. Ethernet connection is configured to boot from PXE
  • D. Storage array is connected directly to an HPE Synergy frame

正解：A

解説：
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=c05336974


質問 # 41
For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.

正解：

解説：


質問 # 42
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?

  • A. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
  • B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
    10 Compute Modules are installed in the frame.
  • C. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
  • D. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

正解：B


質問 # 43
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools. For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?

  • A. The storage pool should be disabled using the array management tool.
  • B. The storage pool should be marked as read-only using HPE OneView.
  • C. The storage pool should be removed from HPE OneView using a PowerShell script.
  • D. The storage pool state should be changed to discovered using HPE OneView.

正解：A


質問 # 44
Which action is allowed on storage pools managed by HPE OneView?

  • A. Volume provisioning
  • B. Setting storage pool replication
  • C. Changing storage pool capacity
  • D. Changing storage pool RAID level

正解：C


質問 # 45
......


HPE2-T37認定試験は、HPE OneViewの展開と構成、サーバープロファイルの作成と管理、サーバーの健康の監視と管理、自動化の使用、サーバー管理タスクの合理化など、HPE OneViewに関連する幅広いトピックをカバーしています。この試験は、HPEサーバーを操作した経験があり、サーバー管理のスキルと知識を向上させたいITプロフェッショナルを対象としています。

 

正真正銘で最適なHPE2-T37オンライン練習試験資料：https://www.passtest.jp/HP/HPE2-T37-shiken.html

優良な質を持つHPE2-T37問題集と解釈が待ってます。 今すぐゲット：https://drive.google.com/open?id=1RnPiUl3HTJyqWLxHXrMOcbcN74Twr2rM

関するブログ

もっと
HPE2-T37 無料問題集