• ホーム
  • ブログ
  • [Q26-Q44] SAP E_BW4HANA214認証された練習解答、必ずあなたを試験合格させる！[2024]

[Q26-Q44] SAP E_BW4HANA214認証された練習解答、必ずあなたを試験合格させる！[2024]

Share

SAP E_BW4HANA214認証された練習解答、必ずあなたを試験合格させる！[2024]

有効な合格方法SAP Certified Application SpecialistのE_BW4HANA214試験問題集


SAP E_BW4HANA214 認定試験の出題範囲：

トピック出題範囲
トピック 1
  • Core Modeling Artifacts in SAP BW
  • 4HANA
  • Deep Dive into the Source Systems of SAP BW
  • 4HANA
トピック 2
  • Introduction to SAP BW
  • 4HANA, SAP BW Modeling Tools and SAP BW
  • 4HANA Cockpit
  • SAP BW
  • 4HANA and Core Data Services
トピック 3
  • Deep Dive into the modeling artifacts of SAP BW
  • 4HANA
  • Overview of Conversion Approaches toward SAP BW
  • 4HANA
トピック 4
  • Data Provisioning into SAP HANA and SAP BW
  • 4HANA
  • Overview of SAP BW
  • 4HANA additional innovation areas
トピック 5
  • Introduction to SAP HANA native modeling and external SAP HANA Views
  • Developing Hybrid Models with SAP HANA

 

質問 # 26
In an SAP BW/4HANA system you olan to leverage Data Tiering Optimization (DTO) for a DataStore object (advanced).
Which activities are required to set up the HOT tier as well as the COLD tier for this object properly? Note:
there are 2 correct answers to this question.

  • A. Define partitions for the DataStore object (advanced)
  • B. Define the planned temperature for each partition
  • C. Create a Data ArchivingProcess (DAP) for the DataStore object (advanced)
  • D. Choose between Temperature Maintencance "On Partition Level" or "On Object U Level"

正解：A


質問 # 27
Which statements about the table structure of the Data Store object (advanced) are correct? 3 Answers

  • A. SAP recommends using the generated external SAP HANA view if the Data Store object (advanced) serves as a source for data extraction
  • B. SAP provides a database view for reporting purposes (/BIC/A<technical LJname>7)
  • C. SAP creates compatibility views for Data Store object (advanced) to keep existing custom coding safe
  • D. When data is loaded to a Direct Update Data Store object (advanced), the inbound table is loaded first
  • E. SAP provides a database view for external SQL access (/BIC/A<technical L-J name>8)

正解：A、B、D


質問 # 28
The SAP BW/4HANA StarterAdd-on is installed and set to the Compatibility mode. How is the SAP BW system affected? Note: There are 2 correct answers o this question.

  • A. Virtual InfoProviders for Planning are still allowed.
  • B. All objects can be changed after getting approval by a whitelist.
  • C. The SAP BEx Analyzer is decommisioned.
  • D. New InfoCubes can be created after getting approval by a whitelist.

正解：B、C


質問 # 29
A customer wants to convert from SAP BW powered by SAP HANA to SAP BW/4HANA. Which strategy does SAP recommend based on successor object types? (3 Answers)

  • A. Use Semantic Group to organize big data volumes in Data Store object ^ U (advanced)
  • B. Use Open ODS Views to establish virtual access for master and transactiona Udata
  • C. Use ODP_SAP source system type instead of a DB-connect
  • D. Use Composite Providers instead of InfoSet
  • E. Use Write Interface-Enabled Data Store object (advanced) instead of Virtual - Providers

正解：A、B、D


質問 # 30
Why do you use the ' "Enhanced Master Data Update"" setting InfoObject? Note: there are 2 correct answers to this question.

  • A. To enable delta capability
  • B. To enable transitive attributes
  • C. To enable XXL attributes
  • D. To enable parallel loading

正解：A、D


質問 # 31
You want to load datafrom SAP Ariba to SAP BW/4HANA. Which object in SAP BW/4HANA does SAP recommend to use for this scenario?

  • A. Write Interface-Enabled DataStore Object
  • B. Direct Update DataStore Object
  • C. DataStore of type ODPJHANA
  • D. DataStore of type ODP_CDS

正解：A


質問 # 32
You use an Open Hub Destination to distribute SAP BW/4HANA data to a table managed by an SAP database.
Which technologies can be used? Note: There are 2 correct answers to this question.

  • A. Smart Data Access (SDA)
  • B. Operational Data Provisioning (ODP)
  • C. Database Connection (DBCON)
  • D. Remote Function Call (RFC)

正解：A、C


質問 # 33
You use the SAP BW/4HANA Transfer Cockpit to prepare your SAP BW system for an in place conversion to SAP BW/4HANA. Which functions are provided by this cockpit? Note: There are 2 correct answers to this question.

  • A. Transfer Bex Queries into BW Queries
  • B. Transfer Standard Authorizations
  • C. Execute Pre-Checks
  • D. Transfer 3.x DataFlow into 7.x DataFlows

正解：B、C


質問 # 34
Which effects do you expect for a BW Query if youset the SAP HANA runtime mode, called ""Operations in SAP HANA"", to the value ""[A(Standard)""? Note: There are 2 correct answers to this question.

  • A. A cluster of InfoProviders with a homogenous mapping is created (expert mode
  • B. The system supports formulas with a complex currency or unite (expert mode 8)
  • C. The system supports the calculation of condition (expert mode 9)
  • D. The user can manually choose the expert mode 3,8 or 9 by himself

正解：A、B


質問 # 35
What is a valid data target in an SAP HANA Analysis Process without using a Data Trasfer Process?

  • A. CompositeProvider
  • B. DataStore object (advanced)
  • C. InfoObject with Attributes
  • D. SAP HANA Database Table

正解：D


質問 # 36
What is the recommended and supported way to virtually consume data in SAP BW/4HANA based on SAP ABAP CDS View?

  • A. Model a Composite Provide which directly consumes the SAO ABAP CDS View.
  • B. Model an Open ODS View of source type "DataSource (BW)"which refers to the SAP ABAP CDS U View
  • C. Model a Composite Provider which consumes an SAP HANA Calculation View which refers to the SAP ABAP CDS View.
  • D. Model an Open View of source type "Dattabase Table or View" which refers to the SAP ABAP CDS U View.

正解：B


質問 # 37
You plan to virtually consume data form an ABAP CDS View in SAP BW/4HANA and decide to use an Open ODS View. Which source type does SAP recommend?

  • A. Datasource (BW)
  • B. Transformation
  • C. Virtual table using SAP HANA Smart Data Access)
  • D. Database Table View

正解：D


質問 # 38
What is a valid reason to leveraging SAP HANA Native Storage Extension (NSE) in the SAP BW/4HANA Data Tiering Optimization (DTO) concept?

  • A. To create an offline archive for data, to ensure legal requirement are fulfilled
  • B. To reduce the SAP HANA memory consumption of data that is only used infrequently"
  • C. To aggregate data and improve the reporting performance for year-to-date values
  • D. To move historical data that only needs to be read exceptionally to an external storage

正解：B


質問 # 39
What are valid reason to generate external SAP HANA View for SAP BW/4HANA objects? Note: there are 2 correct answers to this question.

  • A. To leverage the SAP HANA-optimezed Analytic Manager to process BW Query
  • B. To consume SAP BW/4HANA data and manage access with native SAP HANA concepts
  • C. To apply SAP HANA transformational logic instead of SAO ABAP logic
  • D. To create an additional persistent layer of data in SAP HANA

正解：A、B


質問 # 40
You model an Open ODS View on an SAP HANA table. You would like to persist the data in a SAP BW/4HANA object based on the 'Generate Dataflow...' function.
Which objects are created automatically? Note: there are 3 correct answers to thi s question

  • A. DataStore object (advanced)
  • B. InfoSource
  • C. InfoPackage
  • D. DataSource
  • E. Transformation

正解：A、B、E


質問 # 41
You would like to implement a virtual scenario in your SAP BW/4HANA system. Which approach does SAP recommend for this kind of scenario? Note: There are 3 correct answer to this question.

  • A. Load SAP HANA data into SAP BW/4HANA InfoProviders based on the Operational Data Provisioning (ODP) framework.
  • B. Integrate external data into SAP BW/4HANA based on the Write Interface- ebabledDataStore object E, Model a CompositeProvider which combines data from multiple SAP BW/4HANA InfoProviders and SAP HANA Views
  • C. Define an Open ODS View which integrates an SAP HANA table into SAP BW/4HANA
  • D. Generate external SAP HANA view of SAP BW/4HANA InfoProviders to consume SAP BW/4HANA data in SAP HANA

正解：A、C、D


質問 # 42
From an SAP BW/4HANA perspective, what is the difference between SAP HANA Smart Data Access (SDA) and SAP HANA Smart Data Integration (SID)? Note: There are 2 correct answers to this question.

  • A. SAP BW/4HANA DataSources of source system type "SAP HANA" can connect to SDA sources, U but NOT to SDI sources.
  • B. SDA is integrates into the SAP HANA Indexserver while you need to setup an additional SAP 1-1 HANA Data Provisioning server for SDI
  • C. SDI provides options for data replication in real-time, while SDA does NOT provide this capability.
  • D. SAP BW/4HANA Open ODS View can be modelled on SDI sources, but NOT on U SDA sources.

正解：B、C


質問 # 43
How does column-based storage enable data to be read faster in SAP HANA?

  • A. Individual columns can be transferred to an SAP HANA optimized row-based format for faster access
  • B. Individual columns are read-optimized by writing into a main store and a delta ^ store
  • C. Individual columns contain all of the information for ine record
  • D. Individual columns can be processed at the same time by different CPU cores

正解：A


質問 # 44
......

SAP E_BW4HANA214事前試験練習テストはPassTest：https://www.passtest.jp/SAP/E_BW4HANA214-shiken.html

E_BW4HANA214練習テスト問題、解答、解釈：https://drive.google.com/open?id=1jmw-u1us1Yv3OwJ4JbRLgX7BPaZo3VL_

関するブログ

もっと
E_BW4HANA214 無料問題集