100%合格率保証付きで最高のOmniStudio-Developer試験でリアル問題PDFがある[2023年07月]
OmniStudio-Developer問題集で2023年最新のSalesforce OmniStudio-Developer試験問題
Salesforce OmniStudio-Developer 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 28
A developer needs to limit the of a DataRaptor Extract to a maximum of one result.
How should the developer configure this?
- A. Set the Limit Property on the Action that calls the DataRaptor Extract.
- B. Define a formula with the Filter function
- C. Use the LIMIT filter on the Extract definition
- D. Use a Custom Output Type when creating the DataRaptor
正解：C
質問 # 29
Which two of these options can a developer use to retrieve data from a Salesforce object?
Choose 2 answers
- A. A Lookup Input Element
- B. A DataRaptor Extract Action
- C. A DataRapt or Post Action
- D. A DataRaptor Load Action
正解：B、C
質問 # 30
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.
When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]'', How should the developer address this issue?
- A. The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname
- B. The valid field names should be added in the Domain object field in the DataRaptor
- C. The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action
- D. SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure
正解：D
質問 # 31
Refer to the exhibit below.
What isthe reason that the fields fail to display the fetched data?
- A. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- B. Lookup Mode is selected in the properties of the Type Ahead Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- D. The typeHead key is not in the correct format.
正解：C
質問 # 32
What parent JSON node name must be sent to a Calculation Procedure?
- A. Input
- B. input
- C. inputs
- D. Inputs
正解：C
質問 # 33
You are configuring an Integration Procedure Action in an OmniScript. The OmniScript needs a JSON response from the Integration Procedure, but you do not want to wait for the response for the user to proceed.
What feature do you enable?
- A. Invoke Mode Fire and Forget
- B. Invoke Mode Non-Blocking
- C. Toast Completion
- D. Use Future
正解：C
質問 # 34
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?
- A. Invoke Mode Fire and Forget
- B. Invoke Mode Non-Blocking
- C. Toast Completion
- D. Use Future
正解：B
質問 # 35
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is not selected in the properties of the Type Ahead Block.
- B. The Typeghead ley is not in the correct format
- C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
正解：C
質問 # 36
Refer to the exhibit below. A developer has configured an Integration Procedure element with SEND/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how could the developer configure Additional Input to send exactly the same data? Assume that the developer checked Send Only Additional Input.
- A.
- B.
- C.
- D.
正解：C
質問 # 37
...... configure Additional input to send exactly the same data? Assume that the develop checked Send Only Additional input.
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
正解：D
質問 # 38
You want to edit a FlexCard.
Which question should you ask and answer before you make changes to the active version of the FlexCard?
- A. Is the FlexCard used anywhere else?
- B. Where will the FlexCard be available to use?
- C. Has the FlexCard been cloned before?
- D. Will the FlexCard only be used for testing?
正解：A
質問 # 39
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
正解：C
質問 # 40
A)
B)
- A. Option B
- B. Option A
正解：B
質問 # 41
An OmniScript displays data from an API using an Integration Procedure, but some of the data is missing.
What error could cause this? Choose 2 answers
- A. The element name for the missing data does not match the JSON node key in the Integration Procedure Response.
- B. The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.
- C. The JSON sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure.
- D. The missing data is trimmed in the Integration Procedure Action Response JSON Path.
正解：A、D
質問 # 42
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?
- A. BlockB: BlockB. Action1
- B. Action1. BlockB. Block A
- C. BlockA: BlockB. Action 1
- D. Action1: BlockB. Block A
正解：D
質問 # 43
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Delete or Deactivate the Set Values element.
- C. Update the ContextId value to specify an id from the Production org.
- D. Add a Show/Hide condition on the Set Values element.
正解：B
質問 # 44
Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers
- A. In a Response Action, in an Additional input value field.
- B. In Procedure Configuration, in a Tracking Custom Data value field.
- C. In a Remote Action, in a Remote Options value field.
- D. In a Remote Action, in an Additional Output value field.
正解：A、D
質問 # 45
......
Salesforce Certified OmniStudio Developer認定は、Salesforceプラットフォームで働く開発者にとって貴重な資格です。この認定は、OmniStudioプラットフォームを使用してソリューションを開発および実装するために必要なスキルと専門知識を個人が持っていることを雇用主やクライアントに示し、また、開発者が新しい仕事の機会を開拓し、収益を増やすためのキャリアアップを支援することができます。
無料OmniStudio-Developer別格な問題集をダウンロード：https://www.passtest.jp/Salesforce/OmniStudio-Developer-shiken.html
OmniStudio-Developer合格保証がつく問題集で合格できるOmniStudio-Developer試験：https://drive.google.com/open?id=1WHYzo80Jv5xh4VwSNl8El_4ZFvgqSqou