[Q43-Q66] テスト資料ACP-01101テストエンジン試験問題はここにある[2024年10月]

テスト資料ACP-01101テストエンジン試験問題はここにある[2024年10月]

合格突破受験者シミュレーションされたACP-01101試験PDF問題を試そう

質問 # 43
Refer to exhibit.


(Note: 1 this exam question rotors to the Shoot Sot Manager functionality m the Windows version and the Project Manager functionality in (he Mac The Mac version appears in the parentheses.] A sheet (layout) ma sheet set (project) needs an index number oi 2. a total sheet count of 57, and a sheet number based on discipline of CO01. as shown in the exhibit The index number and sheet number based on discipline are unique to each sheet (layout) The Sheet Number (Layout Number) Properly is used for the index number |2|.
Which type or properly should be used for the sheet number (layout number) based on discipline IC001

• A. Sheet Creation Property (Layout Creation Property)
• B. Sheet Set Custom Property (Project Custom Property)
• C. Sheet Set View Property (Project View Properly)
• D. Sheet Custom Property (Layout Custom Property)

正解：D

解説：
In AutoCAD, when managing sheets and layouts, different properties are used to control and organize sheet information.
* Sheet Custom Property: This property allows you to define custom information specific to each sheet or layout. It is used for unique identifiers that are not globally applied to the entire sheet set but rather specific to individual sheets.
* Setting the Property:
* Open the Sheet Set Manager.
* Right-click the sheet and select Properties.
* Add a custom property for the sheet number based on discipline (e.g., C001).
* Define the Custom Property:
* In the Properties dialog, add a new property for the sheet number.
* Enter the value (e.g., C001) for the specific sheet.
Using a Sheet Custom Property ensures that each sheet has a unique identifier that can be easily managed and referenced.

質問 # 44
A block entity in the current drawing needs to be converted to a new drawing file of its own.
Which command should be used?

• A. BLOCK
• B. WBLOCK
• C. BSAVEAS
• D. BEDIT

正解：B

解説：
Explanation
the command that should be used to create a new drawing file from selected objects is WBLOCK. This command allows you to export a group of objects as a drawing, which can be inserted into other drawings as a block2.

質問 # 45
You have a drawing that contains three of the same objects.
Which object has layer transparency set to 90? Click the correct object in the answer area.

正解：

解説：

Explanation:
According to the AutoCAD for Design and Drafting documents, layer transparency is a property that makes objects on a layer appear translucent or opaque. The higher the transparency value, the more transparent the layer appears. Therefore, the object that has layer transparency set to 90 is the one that appears the most faded or dimmed in the drawing. In this case, it is the object on the right. You can click on it to select your answer.

質問 # 46
Exhibit.

A CAD designer attaches a contour drawing as an external reference and notices an additional drawing reference is also attached.
How should the Buildings drawing be removed from the C-3 drawing? Note Mac commands shown m parentheses

• A. Open the Contours drawing file, right-click (Control-click) the Buildings reference, and change the Path Type to Remove Path.
• B. Open the Contours drawing file, right-click (Control-click) the Buildings reference, and change the Xref Type to Overlay.
• C. Right-click (Control-click) the Buildings reference and select the Detach option
• D. Right-click (Control-click) the Buildings reference and change the Xref Type to Overlay

正解：C

解説：
* Understanding External References:
* External references (Xrefs) allow you to attach drawing files within your current drawing, enabling collaborative work and data sharing.
* Xrefs can be attached as Overlay or Attachment. Overlays do not include nested Xrefs, while Attachments do.
* Identifying the Problem:
* The exhibit shows that the Buildings drawing is nested within the Contours Xref.
* To remove the Buildings drawing from the C-3 drawing, it must be detached from the Xref hierarchy.
* Steps to Detach Xref:
* Right-click (Control-click) the Buildings reference in the Xref Manager.
* Select the Detach option. This will remove the Buildings reference from the drawing.
* Conclusion:
* To remove the Buildings drawing from the C-3 drawing, detach the Buildings reference directly from the Xref Manager.
References:
* AutoCAD User Guide on Managing Xrefs.
* AutoCAD Help Documentation on Detaching Xrefs.

質問 # 47
Refer to the exhibit.

The exhibit shows a set of ornamental garden stairs going up to a walkway as part of a landscaping design.
You need to make sure that the edge of the top step in shown in a different linetype, as shown by the dashed line in the exhibit.
Which prompt in the OFFSET command should you use?

• A. Erase
• B. Source
• C. Through
• D. Current

正解：D

解説：
Explanation
The Current prompt should be used to make sure that the edge of the top step is shown in a different linetype, as shown by the dashed line in the exhibit. This way, you can set a different linetype for your current layer before using the OFFSET command4.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/AutoCAD

質問 # 48
In model space (MODEL), a room label text height is set to 300 mm in the designated text style.
Which viewport scale should you apply to a layout viewport (PAPER) so that the room label text height will display as 3 mm when plotting the drawing?

• A. 100:1
• B. 1:100
• C. 1:1
• D. A custom viewport scale

正解：A

解説：
Explanation
the formula for determining object scaling is:
Object Height x Annotation Scale x Annotation Plot Size = Model Space or Paper Space Height In this case, we want the room label text height to be 3 mm in paper space when plotting the drawing.
Assuming an annotation plot size of 1 mm and an object height of 300 mm, we can solve for the annotation scale as follows:
300 x Annotation Scale x 1 = 3 Annotation Scale = 3 / 300 Annotation Scale = 0.01 Therefore, the viewport scale that corresponds to this annotation scale is B. 100:1.
https://knowledge.autodesk.com/support/autocad-architecture/learn-explore/caas/CloudHelp/cloudhelp/2016/EN

質問 # 49
While working in a drawing AutoCAD unexpectedly closes After restarting AutoCAD, the Drawing Recovery Manager palette appears on the screen it shows the drawing tile that was opened in the backup flies list.
Which process should be used within the Drawing Recovery Manager to determine which available file is the most current? (Note. Mac commands shown in parentheses.]

• A. Press and hold the Ctrl (Command) key select each file and review the displayed results.
• B. Select each file name and review the last saved date and time in the Details panel.
• C. Double-click the tile name to open the tile and review the data
• D. Right-click (Control-click) the file name and select the properties option to view the lime and date.

正解：B

解説：
To determine the most current file in the Drawing Recovery Manager, you should review the last saved date and time for each file in the Details panel. This ensures you are selecting the most recent version of the drawing.
* Select each file name:
* Procedure: Click on each file name in the Drawing Recovery Manager.
* Review the Details panel:
* Information: The Details panel provides the last saved date and time for each file.
* Purpose: Helps you identify which backup file is the most recent and thus the best candidate for recovery.

質問 # 50
You have two viewports at different viewport scales as shown in the exhibit. The geometry and dimensions were created in model space.
The viewport scales are 1 16 and 1:5. The dimension text height is the same for both viewports in the layout.
Evaluate the graphic and complete the statements by selecting the correct options from the drop-down lists.

正解：

解説：

Explanation:
Box 1 = annotative
an annotative dimension style is a dimension style that automatically adjusts the size of dimensions based on the viewport scale. An annotative dimension style has an icon next to its name in the Dimension Style Manager dialog box. The dimension style is annotative because the dimension text height is the same for both viewports in the layout, even though they have different viewport scales1.
Box 2 = associativeThe DIMASSOC is at its default value of 2, therefore the dimensions are associative because they are linked to and update with the measured geometry3.

質問 # 51

The exhibit shows a workstation arrangement, with horizontal and vertical dimensions, representing the row and column spacings.
Both dimensions have been placed incorrectly, with one origin point of each dimension being placed in the wrong position.
What command should be used to ensure that the dimension objects are placed accurately?

• A. Inspect (DIMINSPECT)
• B. Reassociate (DIMREASSOCIATE)
• C. Adjust Space (DIMSPACE)
• D. Break (D1MBREAK)

正解：B

解説：
Explanation
According to the AutoCAD for Design and Drafting documents1, the command that should be used to ensure that the dimension objects are placed accurately is Reassociate (DIMREASSOCIATE)2. This command associates or reassociates selected dimensions to objects or points on objects3. You can also control whether new dimensions are associative by checking the option Make New Dimensions Associative in the User Preferences tab4.

質問 # 52
In model space (MODEL), a room label text height is set to 300 mm in the designated text style.
Which viewport scale should you apply to a layout viewport (PAPER) so that the room label text height will display as 3 mm when plotting the drawing?

• A. 100:1
• B. 1:100
• C. 1:1
• D. A custom viewport scale

正解：A

解説：
the formula for determining object scaling is:
Object Height x Annotation Scale x Annotation Plot Size = Model Space or Paper Space Height In this case, we want the room label text height to be 3 mm in paper space when plotting the drawing.
Assuming an annotation plot size of 1 mm and an object height of 300 mm, we can solve for the annotation scale as follows:
300 x Annotation Scale x 1 = 3 Annotation Scale = 3 / 300 Annotation Scale = 0.01 Therefore, the viewport scale that corresponds to this annotation scale is B. 100:1.
https://knowledge.autodesk.com/support/autocad-architecture/learn-explore/caas/CloudHelp/cloudhelp/2016/EN

質問 # 53
You have the office arrangement shown in exhibit 1. (Refer to the exhibit 1 tab.)

You need a mirror line to create the right-hand office arrangement shown in exhibit 2. (Refer to the exhibit 2 tab.)

Which tool would you use to make sure the mirror line is centered between the two wall lines without adding additional linework?

• A. Midpoint (MID)
• B. Mid Between Two Points (M2P)
• C. Endpoint (END)
• D. Intersection (INT)

正解：B

解説：
https://www.tutorial-autocad.com/mirror-command
http://docs.autodesk.com/ACD/2011/ENU/filesMDG/WS1a9193826455f5ff2566ffd511ff6f8c7ca-3f53.htm

質問 # 54
A CAD designer needs to create an associative array along a curved path The object being arrayed must remain in its current orientation.
While creating the Path Array, how should the designer ensure the orientation of the object?

• A. Turn off Align items.
• B. Redefine the Base Point.
• C. Turn off Z Direction.
• D. Define a Tangent Direction

正解：A

解説：
When creating a path array in AutoCAD, the objects being arrayed typically align with the direction of the path by default. To maintain the original orientation of the objects while following the curved path, you should turn off the "Align items" option.
* Select the Object: Choose the object you want to array along the path.
* Path Array Command: Use the ARRAYPATH command or go to the Array command and choose Path Array.
* Select Path: Select the path (curved line or arc) along which the objects will be arrayed.
* Turn Off Align Items: In the Array options, turn off the "Align items" checkbox to ensure that the objects maintain their original orientation.
This will keep the orientation of each object the same as the original, regardless of the curvature of the path.

質問 # 55
Refer to the exhibit.

The exhibit shows a plan view of an office arrangement. There is also a table of area of each room areas, which displays the area of each room highlighted with a bold polyline.
The room number labels in the plan are denoted by blocks; made up of a rectangle and a room number attribute.
Which entity in the drawing is used to put the graphical representation of the room number in the Room No.
column in the table?

• A. Block
• B. Single line text
• C. Rectangle and text
• D. Attribute

正解：D

解説：
a block attribute is a tag or label that attaches data to a block. The data can be extracted and displayed in a table. Therefore, the entity in the drawing that is used to put the graphical representation of the room number in the Room No. column in the table is B. Attribute.
http://autocadtip.com/how-to-create-block-attribute-in-autocad.html

質問 # 56
Drawings from different sources have been combined and resulted in duplicate background elements that are slightly offset from each other Some of the layer names match and other layers have an E prefix, indicating that they are existing.
To clean up the drawing, the Overkill (OVERKILL) command is used.
Which two settings will resolve the duplicate background and offsetting issues? (Select 2)

• A. Ignore Layer object property
• B. Maintain associative objects
• C. Ignore Transparency
• D. Tolerance value
• E. Ignore Color object property

正解：A、D

質問 # 57
A CAD designer uses Microsoft Excel for project calculations and then uses the data link functionality of AutoCAD to include those calculations as table objects within their protect drawings.
The designer needs to share their AutoCAD drawing (.dwg) files with the Microsoft Excel ( xisx) tiles included within their drawing set as data links.
Which method should the designer use to do this? (Note. The Mac version is shown in parentheses.)

• A. Use the External References (Reference Manager palette and add data link files.
• B. Use ETRANSMIT and include data link tiles
• C. Use PUBLISH and modify Publish Options
• D. Use the FXPORT command with the tile type set to DXX Extract (*dxx)

正解：B

解説：
* Open your drawing in AutoCAD that includes the data links to the Excel files.
* Access ETRANSMIT:
* Type ETRANSMIT in the command line and press Enter.
* Set Up the ETRANSMIT Package:
* In the Create Transmittal dialog box, click the "Transmittal Setups" button to create or modify a setup.
* Ensure that "Include all files associated with the drawing" is checked. This includes all external references, images, and data links.
* Choose the desired file format for the transmittal (e.g., ZIP file).
* Include Data Link Files:
* Make sure that the "Bind" option for external references is set to the required type (e.g., "Bind" or "Insert").
* Click "OK" to close the Transmittal Setups dialog box.
* Create Transmittal:
* In the Create Transmittal dialog box, review the list of files to be included in the transmittal package.
* Click "OK" to create the package.
* Save the Transmittal:
* Choose a location to save the transmittal package and provide a file name.
* Click "Save".
References:
* AutoCAD Documentation on ETRANSMIT
* Autodesk Knowledge Network: Using ETRANSMIT in AutoCAD

質問 # 58
You have the drawing shown in the exhibit.

You are using the DIM command to preview suitable dimension type objects in the drawing.
Which dimension type will appear when you hover over each object? Select the appropriate dimension type from each of the drop-down lists.

正解：

解説：

* When you hover over the arc (1), you will see a radius dimension type preview.
* When you hover over the circle (2), you will see a diameter dimension type preview.
* When you hover over the horizontal line (3), you will see a horizontal linear dimension type preview.
* When you hover over the angled line (4), you will see an angular dimension type preview.

質問 # 59
Exhibit.

Multiheader annotations have been placed on the LEADFRS layer using a circle block style.
The color of the LEADERS layer Is set to blue and the content within the Circle block is on Layer 0 and color is set to ByBlock.
The Circle block portion of the multileader appears green and the leader portion appears blue.
Which two combinations of color settings within the multileader style will produce the results shown? (Select two.)

• A. ByLayer Green
• B. Green DyBlock
• C. Blue Green
• D. ByLayer ByLayer

正解：A、D

解説：
* Understanding Multileader Components:
* Multileader annotations consist of a leader line and a block (circle in this case).
* The display of these components is influenced by their layer and color settings.
* Layer and Color Settings:
* The leader portion appears blue because it is on the LEADERS layer which is set to blue.
* The circle block appears green because its content is on Layer 0 and set to ByBlock. This means the block takes on the properties of the layer it is inserted on unless overridden.
* Combination of Color Settings:
* Option D: ByLayer for the leader and Green for the block results in the leader being blue (from the LEADERS layer) and the block being green (explicitly set to green).
* Option B: ByLayer for both the leader and block means the leader is blue (from the LEADERS
* layer) and the block inherits the green color set in its definition.
* Conclusion:
* The two correct combinations to achieve the described color settings are ByLayer Green and ByLayer ByLayer.
References:
* AutoCAD Help Documentation on Multileaders.
* AutoCAD User Guide on Layer and Color Management.

質問 # 60
You need to create a hatch pattern that looks the same regardless of the viewport scale.
What should you do?

• A. Create an associative hatch
• B. Create an annotative hatch
• C. Set the default hatch pattern
• D. Set the current hatch scale by using the HPSCALE system variable

正解：B

解説：
Explanation
an annotative hatch is a hatch that automatically adjusts its scale and size to match the viewport scale. This means that the hatch pattern will look the same regardless of how you zoom in or out of the viewport.
To create an annotative hatch, you need to:
* Set the annotation scale tool to 1:1
* Create your hatch as usual
* In the properties palette, make the hatch annotative
* Add annotation scales to the hatch as needed
This will create a hatch that displays correctly at different viewport scales.
https://forums.autodesk.com/t5/autocad-forum/annotative-hatch/td-p/2651268

質問 # 61
Refer to exhibit.

Viewport A was copied to create Viewport B in the same layout.
Viewport B needs to display the trail system in blue and all other content as gray as shown.
Which changes should the CAL) designer make to display the linework in Viewport b as requested?

• A. Change the layer colors as requested
• B. Change the VP layer colors as requested
• C. Create a property filler group to assign the correct colors to the layer
• D. Force the color of the trees and trail in model space for each viewport

正解：B

解説：
To achieve the desired appearance where the trail system is blue and all other content is gray in Viewport B, the designer needs to utilize the viewport layer properties.
* Open the Layer Properties Manager:
* Type LAYER in the command line and press Enter.
* Modify VP Layer Colors:
* In the Layer Properties Manager, find the layers that need to be changed (the trail system and other content layers).
* Select the specific viewport (Viewport B) from the "Viewport Overrides" column.
* Change the Colors for Viewport B:
* For the trail system layer, set the color to blue.
* For all other layers, set the color to gray.
* This can be done by double-clicking the color cell in the "VP Color" column and selecting the desired color.
* Apply Changes:
* Close the Layer Properties Manager after making the necessary changes. The viewport overrides will apply, showing the trail system in blue and other content in gray in Viewport B.

質問 # 62
A company's central server holds project directories that contain drawings. Team members who work onsite copy a directory locally to work offline.
Users often report that external references (xrefs) cannot be loaded after copying the project directories to their local machine from the company's central server.
How should you make sure that the users can load the xrefs without error?

• A. Set the external references to use absolute paths
• B. Set the external references to use relative paths
• C. Set the Reference Type of the xrefs to Overlay
• D. Set the Reference Type of the xrefs to Attachment

正解：B

解説：
Explanation
the external references use relative paths to load them without error after copying them locally from a central server. This way, you can avoid broken links due to changes in drive letters or folder names.
https://grabcad.com/tutorials/working-with-external-references-xrefs-autocad

質問 # 63
You are setting up a drawing layout.
You need to rotate the viewport viewing angle by 90 degrees without rotating the viewport.
What should you do next?

• A. Activate the viewport that you want to. Start the Dview command and use the Camera option.
• B. Select the viewport that you want to rotate, and then use the UCS command with the Z Axis option.
• C. Select the viewport that you want to rotate, and then use the Rotate command.
• D. Activate the viewport that you want to rotate. Start the Dview command and use the Twist option.

正解：D

解説：
you need to activate the viewport that you want to rotate and start the Dview command with the Twist option.
This will allow you to rotate the view within a viewport without rotating the viewport itself.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD

質問 # 64

You have a line segment that is 150 units long as shown in the exhibit.
You need the line to be 200 units long without adding any additional linework. The leftmost end of the line must remain in the current position.
What should you do?

• A. From the Delta option of the Lengthen command, enter 200 units and then select the right end of the line
• B. From the Project option of the Extend command, enter 50 units, and then select the right end of the line.
• C. From the Edge Extension option of the Extend command, enter 50 units, and then select the right end of the line
• D. From the Delta option of the Lengthen command, enter 50! units and then select the right end of the line

正解：D

解説：
From the Delta option of the Lengthen command, enter 50 units and then select the right end of the line. This way, you can increase the length of the line by 50 units from its current endpoint without changing its direction or position2
https://www.learnvern.com/autocad-tutorial-in-hindi/how-to-use-lengthen-command

質問 # 65
A CAD designer adds the Annotation Scale tool to the status bar During their work, the designer notices that it Is no longer visible What is causing, this issued?

• A. The designer's user interface is locked
• B. The geometry Is outside of the drawing limits
• C. The designer Is in model space
• D. The designer is in paper space.

正解：C

解説：
* Check the Active Space:
* The Annotation Scale tool is only visible when the user is in model space.
* Ensure that you are currently working in model space by checking the status bar or the workspace tab.
* Switch to Model Space:
* If you are in paper space (layout view), switch to model space by double-clicking inside a
* viewport or selecting the 'Model' tab at the bottom of the drawing area.
* Verify the Annotation Scale Tool:
* The Annotation Scale tool should now be visible in the status bar.
* If it is still not visible, right-click on the status bar, go to 'Customization,' and ensure 'Annotation Scale' is checked.
References:
* AutoCAD Documentation on Annotation Scale: Annotation Scale
Thank you for your engagement! Join our VIP AI Discord community at SmartPrompt for AI news and custom prompts for passive income opportunities with business automation.

質問 # 66
......

正真正銘で最適なACP-01101オンライン練習試験資料：https://www.passtest.jp/Autodesk/ACP-01101-shiken.html

優良な質を持つACP-01101問題集と解釈が待ってます。 今すぐゲット：https://drive.google.com/open?id=1uN4_cI0sUZj61NZ3PEDcVqHIPHGx-TId